• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.139-145
• /
• 2016

Dumbbell is the most basic topology that can be used in almost all kind of network experiment within it or just by little expansion. While Transmission Control Protocol TCP is the basic protocol that is used for the connectivity among networks and stations. TCP major and basic goal is to provide path and services to different applications for communication. For that reason TCP has to transfer a lot of data through a communication medium that cause serious congestion problem. To calculate the congestion problem, different kind of pre-cure solutions are developer which are Loss Based Variant and Delay Based Variant. While LBV keep track of the data that is going to be passed through TCP protocol, if the data packets start dropping that means congestion occurrence which notify as a symptom, TCP CUBIC use LBV for notifying the loss. Similarly the DBV work with the acknowledgment procedure that is used in when data ACK get late with respect to its set data rate time, TCP COMPOUND/VAGAS are examples of DBV. Many algorithms have been purposed to control the congestion in different TCP variants but the loss of data packets did not completely controlled. In this paper, the congestion control algorithms are implemented and corresponding results are analyzed in Dumbbell topology, it is typically used to analyze the TCP traffic flows. Fairness of throughput is evaluated for different TCP variants using network simulator (NS-2).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.901-909
• /
• 2021

Since mobile devices have limited computational resources, it tends to use the cloud to compute or store data. As real-time becomes more important due to 5G, many studies have been conducted on edge clouds that computes at locations closer to users than central clouds. The farther the user's physical distance from the edge cloud connected to base station is, the slower the network transmits. So applications should be migrated and re-run to nearby edge cloud for smooth service use. We run applications in docker containers, which is independent of the host operating system and has a relatively light images size compared to the virtual machine. Existing migration studies have been experimented by using network simulators. It uses fixed values, so it is different from the results in the real-world environment. In addition, the method of migrating images through shared storage was used, which poses a risk of packet content exposure. In this paper, Containers are migrated with Secure CoPy(SCP) method, a data encryption transmission, by establishing an edge computing environment in a real-world environment. It compares migration time with Network File System, one of the shared storage methods, and analyzes network packets to verify safety.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.298-306
• /
• 2016

With the advent of Internet of Things (IoT) technology that allows the communications between things and devices over the Internet, a lot of researches on the IoT services, such as smart home or healthcare, have been progressed. In the existing machine-to-machine (M2M) communications, however, since the underlying link-layer technologies, such as Bluetooth or ZigBee, do not use the Internet Protocol (IP) communication, those technologies are not suitable to provide the IoT services. Accordingly, this paper discusses how to provide the Internet services in the M2M communication, and propose an implementation of the Constrained Application Protocol (CoAP) over 6LoWPAN for providing IoT services in the BLE networks. Based on the implementation, we compared the performance between HTTP and CoAP for IoT communications. From the experimental results, we can see that the CoAP protocol gives better performance than the HTTP protocol with two times higher throughput, 21% faster transmission time, and 22% smaller amount of generated packets.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.34-42
• /
• 2009

Mobile communication traffic is changing from voice to data/internet, e.g. wireless internet access, SMS/MMS. more and more. Therefore many data services are coming out over 3G, Mobile WiMAX(WIBRO), LTE etc. Wireless internet market is growing and MIPv6 is more important and many protocols being studied and developed from MIPv6 to Fast MIPv6, Hierachical MIPv6, Proxy MIPv6, etc. The significant factor over MIPv6 is Hand-over latency and Packet-loss PMIPv6 is efficient for reducing mobility related messages and hand-over latency, but it considers single LMA domain. If mobile node is moving inter-LMAs, hand-over delay time affects the real-time communications. To overcome this hand-over delay, we propose present and new enhanced schemes and analize the performance and show the results.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.508-514
• /
• 2005

The research in internetworking between UMTS and WLAN, which is completed with merits and demerits, Is actively progressed to establish global roaming environments. This internetworking is classified into two groups: loosely-coupled and tightly-coupled. h tightly-coupled mechanism demands lots of investment and considerable amountof time to construct, which is directly connoted between UNTS and WLAN via IWU. On the other hand, a tersely-coupled mechanism is more scalable and easier to implement than a tightly-coupled one while it has critical drawbacks of packet loss and blocking of services due to handover delay. To alleviate these drawbacks. this work proposes a handover scheme between UMTS and WLAN, which is based on HMIPv6. The performance of the proposed scheme is evaluated by the simaulation. The proposed internetworking scheme based on HMIPv6 shows hotter performance than those based on MIPv6.

• Journal of The Korean Association of Information Education
• /
• v.15 no.1
• /
• pp.129-136
• /
• 2011

The aim of this study is to present the handover procedures and the performance comparisons of layered mobility management schemes for wireless mobile Internet. To investigate efficient mobility management schemes providing seamless information services in a mobile environment, this paper provided the detailed discussions of existing network layered mobility management scheme, including Mobile IPv4, Mobile IPv6, and new transport layer mobility management scheme, stream control transmission protocol (SCTP) based mobility architecture (SMA). Network simulator-2 (ns-2) was used to compare the performance between Mobile IPv6 and SMA in the wireless mobile Internet environment. Simulation results show that for typical network configuration and parameters, SMA has a lower handover latency, lower packet loss rate, and higher throughput than Mobile IPv6.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.123-132
• /
• 2005

By complementary integration of WLAN and UMTS, a Beyond third Generation(B3G) mobile network can be constructed to establish the fastest global roaming environments, There are 2 types of B3G networks: loosely-coupled and tightly-coupled, A tightly-coupled network demands lots of investment and considerable amount of time to construct. On the other hand a loosely-coupled network is more scalable and easier to implement than a tightly-coupled one, But it has critical drawbacks of packet loss and blocking of services due to handover delay, To alleviate these drawbacks this thesis proposes a vertical handover procedure between WLAN and UMTS, which is based on MAP of HMIPv6, Performance of the proposal is evaluated in terms of blocking probabilities, The proposed procedure based on HMIPv6 shows better performance than those based on MIP.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.284-293
• /
• 2010

For the successful deployment of Mobile Internet, fast handover technologies are essential. For the past few years several handover mechanisms are suggested, and Fast Handover for Proxy Mobile IPv6 (PFMIPv6) is one of the promising schemes for this purpose. In this paper, we propose a novel L2/L3 cross layer handover scheme based on ARIMA prediction model to apply PFMIPv6 to Mobile Internet environment effectively. Performance gains are evaluated in terms of probabilities of predictive-mode operation, handover latencies, packet loss probabilities, and signaling costs. Three mobilities models are used for our simulation: Manhattan Model, Open Area Model, and Freeway Model. Simulation results show that the proposed scheme can increase probabilities of predictive-mode operation and reduce handover latency, packet loss probabilities, and signaling cost.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.197-205
• /
• 2000

This paper proposes and evaluates a scheme which enhances real-time performance on the Ethernet-based residential network where cable length is very short and most of traffic passes through a specific device. The scheme aims at enhancing deadline meet ratio of the real-time traffic, for example, video stream by means of applying the functionalities such as queue discrimination and early packet discard as well as maintaining network load properly. The design includes the description on hardware interfaces along with the software modules such as scheduler, device driver and connection manager. The simulation results via SMPL suggest that the proposed network can be used as a cost-effective residential network. We also measure the permissible bandwidth for non-real-time traffic without degrading the performance of real-time traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.168-180
• /
• 2018

Due to the spread of mobile devices and the introduction of high-quality services, mobile traffic is expected to increase sharply and overload of cellular networks is expected. D2D communication is a way to reduce the load and evolve to 5th generation. Since D2D communication directly communicates between the terminals, it can reduce the overload of the cellular network and improve energy efficiency, data rate and network performance. This paper proposes a D2D handover scheme for D2D communication in cellular networks. The cellular network is a 3GPP EPS, and the proposed D2D handover method improves the existing EPS handover process considering compatibility between existing EPS and D2D communication. We also demonstrate the superiority of the proposed handover scheme using the network simulator ns-3. Simulation results show that the proposed handover scheme is superior to existing handover methods in terms of CUE variation, packet transmission delay time, and throughput.