• The Magazine for Energy Service Companies
• /
• s.70
• /
• pp.54-61
• /
• 2011

최초 패시브하우스의 아이디어는 1988년 Prof. bo Adamson (Lund 대학, 스웨덴)와 현재 독일의 패시브하우스 연구소 소장인 Dr. Wolfgang Feist에 의해서 계획되어 졌으며, 이후 독일 헤센(Hessen)주 경제부의 지원하에 1991년 Prof. Bott / Ridder / Westermeyer의 설계로 독일의 Darmstadt 북쪽의 Kranichstein에 최초로 완공되었다. 그 이후 Wuestenrot-Stiftung와 헤센주 환경처의 지원아래 여러분야의 검사와 측정이 이루어 짐으로써 실현되어 졌으며, 그 후 독일에 약 13,000여채의 패시브하우스가 보급되었고, 여러 용도(주택, 학교, 사무실, 기숙사 등)에 적용되며 발전하고 있다.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.21-29
• /
• 2018

This study aimed to find and suggest the purpose of future plans, critical items on designing and Related standards to amend construction standards for domestic energy saving and environmentally friendly housings. It would also activate and increase the supplies of passive house minimizing the problems on current apartment housings in winter and reducing heating energy which brings fine dust pollution. After defining the standard model of Korean apartment housings(reference model), this study calculated the amount of heating energy demand per unit area annually as applying the yearly changed standards from 2008 to 2017 to existing standard model. It turned out that applying 2017 construction standards of energy saving and eco-friendly housings to reference model has saved up to 75% of heating energy demand comparing to the one applied 2008's. However, it still could not solve the fundamental problems such as winter fungus, condensation, freezing, freeze and burst, and insulation weakness space, and could not be free from fine dust particles. To solve them, this study suggested improved standards adding critical items on design related to outside insulation, cut off the heat-bridge, enforce air-tightness and heat change efficiency on heat recovery ventilator. As a result, it has reduced more than 10% of heat demand from 2017. It would be more than 90% of savings from 2008 if we make the amount of heat loss be zero on heat bridge on designing stage in the future.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.433-435
• /
• 2003

새로운 컴퓨팅 패러다임으로 대두되고 있는 유비쿼터스 컴퓨팅 환경에서 중요한 위치를 차지하고 있는 인터페이스 기술로 RFID가 이미지 기반 태그 등을 들 수 있다. RFID의 경우 여러 개의 태그를 인식할 수 있으나 태그의 존재를 모르는 사용자에게 혼동을 초래할 수 있고 이미지 코드만을 사용했을 때는 패시브 태그로 적송시간에 화물확인시간을 단축하기 어렵고 위치추적시에 액티브적인 요소가 없어 불편함을 가져올 수 있다. 그러므로 업무프로세스에서 인식거리 및 사용자 편의를 위한 액티브적인 요소가 요구되는 위치추적 및 신속한 입력을 위한 운송부문에 RFID를 사용하고 적품 여부를 확인하는 부분에 패시브적인 태그를 사용하여 유리한 점을 하나로 묶은 듀얼 태그 인터페이스를 제안한다. 이는 모든 운송자원을 파악하고 자원의 효율적인 활용을 통해 변화하는 환경에 신속하게 대응할 수 있는 인프라를 구축할 수 있으며 원재료의 수급에서 사용자에게 물품을 전달하는 과정에서 자원과 정보의 일련의 흐름을 관리하는게 가능하게 될 것이다.

• Journal of architectural history
• /
• v.29 no.6
• /
• pp.7-18
• /
• 2020

The domestic of modern architectural remodeling method emphasizes simple aesthetic elements, and the correct design and construction methods are not established based on quantitative grounds, thus damaging the value of cultural properties. This study attempts to re-examine the value of modern buildings recognized as old buildings. It is a basic step to present the correct remodeling of the building. The design criteria for exterior wall remodeling of modern buildings were presented. These research results are suitable for energy conservation design standards and can prevent defects in buildings. In the future, more accurate analysis will be required by securing physical property values for various domestic materials through subsequent research.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.4
• /
• pp.27-34
• /
• 2019

Recently the architectural paradigm have been changing into eco-friendly architecture as an sustainable architecture. This social background encourages the development of various methods of building applicable for eco-friendly buildings in architectural design. Among them, passive architecture is an design approach for eco-friendly design that contrasts with technology-based methods through MEP for renewable energy. This study researches the Passive Architectural Design methodology with two points of view; Passive Architectural Design Techniques as a guideline, which defines the elements to consider for passive architecture, and the project of Sejong Municipal Public Library as a case, which is to analysis the architectural design process. The purpose of this study is to propose an eco-friendly public building based on the methodology which is suitable for passive architectural design. Finally, this study suggests that the eco-friendly public building design for passive architecture should consider from the early step of design process, such as concept and building form etc. What is important for the passive architecture is not how much building can produce the natural energy but how less building consumes it to maintain.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.135-138
• /
• 2008

최근 인간을 모방하는 휴머노이드 로봇(Humanoid robot)에 대한 관심이 증가함에 따라, 기계공학, 생체공학, 제어이론 등 여러 분야에서 관련 연구가 활발히 진행되고 있다. 이에 본 논문에서는 액츄에이터(Actuator)가 없이 경사진 지면을 걸을 수 있는 두 발을 가진 패시브 로봇(Passive robot)을 대상으로 강화학습과 메니폴드(Manifold control) 기법을 사용하여 안정적으로 걸을 수 있도록 제어기(Controller)를 설계하는 방안을 고려한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.328-331
• /
• 2005

In this paper we review the security and privacy problems in the RFID system and briefly describe the research topics to solve these problem. And, we design and implement the tag authentication system to authenticate tags in the RFID system which is composed of PC, reader and passive type tag with low power 8 bit microprocessor.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.75-81
• /
• 2015

In this paper, numerical analysis by finite element method and parameter design by the Taguchi method were used to reduce warpage of a two passive components embedded double side substrate for PoP(Package on Package). The effect of thickness of circuit layers (L1, L2) and thickness of solder resist (SR_top, SR_BTM) were analyzed with 4 variations and 3 levels(minimum, average and maximum thickness) to find optimized thickness conditions. Also, paste effect of solder resist on unit area of top surface was analyzed. Finally, experiments was carried out to prove numerical analysis and the Taguchi method. Based on the numerical and experimental results, it was known that circuit layer in ball side of substrate was the most severe determining deviation for reducing warpage. Buried circuit layer in chip side, solder resist and were insignificant effects on warpage relatively. However, warpage decreased as circuit layer in ball side thickness increased but effect of solder resist and circuit layer in chip side thickness were conversely.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.51-52
• /
• 2010

최근 방송용 모니터링 스피커 시스템은 디지털 방송 기술과 반도체 기술의 급속한 발전에 힘입어 보다 질 좋은 오디오 앰프를 싼 가격과 소형화 기술을 적용하여 앰프와 스피커 매칭의 문제점을 안고 있는 패시브 크로스오버 사용의 멀티웨이 스피커를 대체하여 액티브 크로스 오버를 사용한 멀티 앰핑의 액티브 스피커로 진화 하고 있다. 방송 스튜디오에서 많이 사용되고 있는 2웨이 액티브 스피커를 모델로 국악콘텐츠 모니터링에 최적화된 액티브 모니터링 스피커 구현을 위한 크로스오버 회로를 설계하고 전자회로 시뮬레이션 프로그램인 Pspice를 이용하여 최적의 국악콘텐츠에 적용하기위한 크로스오버 주파수구현을 위한 소자 값들을 찾아내어 실제 제작회로에 적용 시 경비 절감과 개발시간을 단축 한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.863_864
• /
• 2009

Design and drive characteristics of SR drive for hydraulic pump system using passive converter is presented in this paper. In oder to get the high performance, a simple passive circuit is added in the front-end of a conventional asymmetric converter, which consists of three diodes and one capacitor. This passive converter has the high demagnetization voltage, to reduce the demagnetization time. Futhermore optimal turn-off angle for the proposed passive converter is proposed. According to motor speed and current, an optimal turn-off angle can be achieved by look-up table to reduce torque ripple. The characteristic of proposed hydraulic pump system using passive converter is verified by simulation and experimental results.