• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2465-2473
• /
• 2012

Recently, as one of low complexity video encoding methods, DVC (Distributed Video Coding) scheme has been actively studied. Most of DVC schemes exploit feedback channel to achieve better coding performances, however, this causes these schemes to have high decoding delay. In order to overcome these, this paper proposes a new fast DVC decoding method using parity-bit request model, which can be obtained by using bit-error rate, sent by encoder with motion vector, which is transmitted through feedback channel by decoder after generating side information. Through several simulations, it is shown that the proposed method improves greatly the decoding speed, compared to the conventional schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.522-527
• /
• 2007

In this paper, we propose an error control coding scheme for constant-amplitude multicode-biorthogonal modulation. The product code is appropriate to the constant-amplitude multicode-biorthogonal modulation for the bit error rate performance improvement. In the constant-amplitude multicode-biorthogonal modulation, the vertical redundant bits are used for the constant amplitude coding. The proposed product code can be constructed by using the additional horizontal redundant bits. The hardware complexity of the encoder/decoder pair is very low. The simulation results show that the bit error rate performance of the proposed coding scheme is improve

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.215-218
• /
• 2008

본 논문에서는 다중 트랜스 신호를 정 진폭으로 전송하는 정 진폭 다중 트랜스 직교 변조 방식에서 이용할 수 있는 오류 정정 부호 방법을 제안한다. 격자부호를 사용한 다중 트랜스 직교 변조방식이 비트 오율 성능을 높이는 것에 적합함을 보인다. 정 진폭 다중 트랜스 직교 변조 방식에서는 정진폭을 유지하기 위하여 세로축의 패리티 비트를 이용하여 신호를 부호화시키며, 가로축의 패리티 비트를 부가하여 이것이 격자부호를 이루도록 하여 비트 오율 성능 개선을 최대화 하도록 한다. 제안된 시스템을 이용하여 여러 비트율의 성능을 비교해 보았을 때 시스템의 복잡도의 증가가 거의 없으므로 복조기의 복잡도도 간단히 구현할 수 있으며 격자부호를 사용하지 않은 시스템에 비하여 비트 오율의 성능이 더 개선됨을 알 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.535-537
• /
• 2005

디지털 신호 및 전송부호의 오류검출에는 예전부터 패리티 체크가 사용되어 왔다. 그러나 패리티 체크 기법은 구현 및 알고리즘이 단순, 간결한 우수성이 있지만 특정 데이터 비트의 경우 오류 검출이 불가능하다는 문제점을 가지고 있다. 이후 패리티 체크 기법은 해밍 코드 및 채널 오류 정정을 위한 LDPC 코드와 같은 다양한 오류검출 및 정정 알고리즘에 적용되어 발전되어 왔으며, 그 중 LDPC 코드의 bit-flipping 알고리즘에서는 패리티 기법을 반복적으로 적용하는 방식을 택하고 있다. 본 논문에서는 이러한 채널 오류 정정을 위한 LDPC의 bit-flipping 알고리즘을 이차원 코드에 적용하고, 이 때 bit-flipping 알고리즘이 가지고 있는 문제점을 보완할 수 있는 개선된 LDPC 코드를 제안한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.229-233
• /
• 2003

오늘날 많은 양의 데이터가 디지털 논리 회로와 상호 연결에 의해서 다양한 컴퓨터 시스템과 서브시스템 사이에서 전송된다. 데이터가 전송될 때 전자적 잡음, 장치 결함, 시간 오류 등에 의해서 오류가 발생한다. 일반적으로 비트 오류가 발생했을 때 패리티 검사회로가 사용된다. 시스템의 신뢰성과 유용성을 높이기 위해서는 효율적인 패리티 검사회로가 요구된다. 본 논문에서는 PBCA의 특성행렬을 이용하여 거리가 3인 부호를 생성하는 방법과 오류 정정에 사용되는 행렬을 구성하는 방법 및 복호기법을 제시한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.891-898
• /
• 2014

The DVC (Distributed Video Coding) provides a theoretical basis for the implementation of light video encoder. Conventionally, lots of studies have been focused on the codec scheme of Stanford University that has a feedback channel to control the bit rate finely. However, the codec scheme can not evaluate the qualities of the frames reconstructed by the received parity bits at the decoder side. This paper presents an efficient method of estimating distortion by correcting the virtual channel noises in side information and then facilitating the measurements of the visual qualities. Through several simulations, it is shown that the proposed method is very efficient in estimating the visual qualities of the reconstructed WZ frames.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.160-172
• /
• 2014

Although Wyner-Ziv (WZ) video coding proves useful for applications employing encoders having restricted computing resources, the WZ decoder has a problem of excessive decoding complexity. It is mainly due to its iterative LDPC channel decoding process which repeatedly requests incremental parity data after iterative channel decoding of parity data received at each request. In order to solve the complexity problem, we divide bit planes into two groups and estimate the minimum required number of parity requests separately for the two groups of bit planes using bit plane correlation. The WZ decoder executes the iterative decoding process only after receiving parity data corresponding to the estimated minimum number of parity requests. The proposed method saves about 71% of the computing time in the LDPC decoding process.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2012

DVC(Distributed Video Coding) techniques have been attracting a lot of research works since these enable us to implement the light-weight video encoder and to provide good coding efficiency by introducing the feedback channel. However, the feedback channel causes the decoder to increase the decoding complexity and requires very high decoding latency because of numerous iterative decoding processes. So, in order to reduce the decoding delay and then to implement in a real-time environment, this paper proposes several parity bit estimation methods which are based on the temporal correlation, spatial correlation and spatio-temporal correlations between LDPCA frames on each bit plane in the consecutive video frames in pixel-domain Wyner-Ziv video coding scheme and then the performances of these methods are compared in fast DVC scheme. Through computer simulations, it is shown that the adaptive spatio-temporal correlation-based estimation method and the temporal correlation-based estimation method outperform others for the video frames with the highly active contents and the low active contents, respectively. By using these results, the proposed estimation schemes will be able to be effectively used in a variety of different applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.515-520
• /
• 2014

In this paper, the protograph-based block low density parity check (LDPC) code, which improves the performance and reduces the encoder/decoder complexity than the conventional Digital Video Broadcasting Satellite Second Generation (DVB-S2) LDPC code used for the marine satellite communication, is proposed. The computer simulation results verify that the proposed protograph-based LDPC code has the better performance in both the bit error rate (BER) and the frame error rate (FER) than the conventional DVB-S2 LDPC code. Furthermore, by analyzing the encoding and decoding computational complexity, we show that the protograph-based block LDPC code has the efficient encoder/decoder structure.