• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.376-387
• /
• 2017

The creative class is the class of workers whose job is to create meaningful new forms. Recently, much attention has been focused on the role of the creative class in regional development. Many policy makers have invested to amenities to attract more creative class into their cities or regions for regional economic growth. However, there are only a few studies about the migration of the creative class in Korea. The purpose of this study is to make an analysis of the movement of the creative class by using the 17th Korean Labor & Income Panel Study. According to empirical results, the creative class are more likely to move than the non-creative class. The characteristic of creative class who moved is related to married man aged 20s and 30s without own house. Also, there is the difference between determinants of migration of the creative class and the non-creative class. It was founded that the most important determinants of migration of the creative class are housing related reasons such as home ownership and job reasons. Relationship, convenient facilities are not important factors when the creative class make a decision to move.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.713-716
• /
• 2008

This paper presents an automatic back-light brightness control system for mobile displays. One of the most important factors in mobile display is the power consumption due to the limited and movable power source. More than 80% of power of the LCD display is consumed by LED bark-light unit (BLU). The target brightness also becomes higher because of its moving picture and high resolution image, so there are some side effects for not only excessive power consumption but also ergonomic inconvenience in dark environment. To prevent this discomfort and reduce power consumption, this paper proposes automatic brightness control (ABC) technique in mobile displays. Developed system contains TFT-LCD panel with built-in photo sensor, driver IC capable of controlling photo sensor, and BLU. Since the photo sensor array built in panel detects automatically outdoor ambient light intensity, the power of BLU in dark environment is reduced. Developed ABC system showed reduced power consumption of 50% in dark environment. We believe that the proposed system is very useful to control power of mobile TFT-LCD.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.34-41
• /
• 2010

We proposed the new pixel compensation circuit with high aperture ratio and the driving method for the large-area, low-power AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but good mobility and stability. To lower the error rate of the pixel circuit and to improve the aperture ratio for bottom emission method, we simplified the pixel compensation circuit. Because the proposed pixel compensation circuit with high aperture ratio has very low contrast ratio for conventional driving methods, we proposed the new driving method and circuit for high contrast ratio. Black data insertion was introduced to improve the characteristics for moving images. The pixel circuit was designed for 19.6" WXGA bottom-emission AMOLED panel, and the average aperture ratio of the pixel circuit is improved from 33.0% to 41.9%. For the TFT's $V_{TH}$ variation of ${\pm}0.2\;V$, the non-uniformity and contrast ratio of the designed panel was estimated under 6% and over 100000:1 respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1186-1190
• /
• 2009

In this paper, we studied on a characteristic of movement of charged particle in equal electric field. In order to fabricate a panel, we used positive charged toner particles of black and negative one of yellow. Panel was biased rectangle pulse without any overshoot. Also, panel's optical characteristics with contrast ratio and viewing angle is measured with RT-200. Response time was measure by using incident laser and detective photodiode. The distribution of m/q of particles by driving in panel throughout the contrast ratio and response time. As a results, driving voltage, contrast ratio, and response time are decided by m/q of charged particles and when m/q of charged particles in panel have regular distribution, it is induce improvement driving characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.743-744
• /
• 2016

Due to the many amenities of a modern power with solar power and green energy alternative to injury by cutting down on the number of solar energy and pollution and environmental factors. There is still much research and trying to incorporate a variety of applications. In this paper, create a daytime energy by fusing solar panels and billboards, and at night has the advantage that you can save more energy used to sign by the sign serves also and at the same time energy acts like a tent when the day by using the power usage is expected to be higher.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.449-456
• /
• 2019

Recent developments in architectural technologies and programs have enabled architects to think creatively and design free-form architecture. however, there are many problems in the production technology of FCP(Free-Form Concrete Panel). In particular, reduced accuracy due to lack of free-form panel production technology can lead to redesign of buildings as a result, problems such as an increase in construction cost and period. Therefore, this experiment aimed to compensate the decrease of the accuracy according to the displacement difference and to derive the proper mixing ratio for maintaining the shape during the free-form panel curing. In this study, molds were made using paraffin that is a recyclable phase change material. Concrete Panel is usually produced from Portland cement, dead burn magnesia, phosphate, borax and fine aggregate. In this study, four mixing ratios of FCP were selected after each material was blended to determine the proper blending ratio of the fluidity phase, the water absorption rate and the water content of the test piece. FCP was fabricated on the basis of the selected four compounding ratios and thickness and error rate were measured. Based on the error rate of the measured FCP, the quality standard was satisfied among the four compounding ratios.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.260-265
• /
• 2015

This paper proposes a alignment system using edge feature. An alignment system obtains the position and orientation of printed circuit board(PCB) or liquid crystal display(LCD) panel through the fiducial marks. Thus, it is the indicator of the system performance how accurate we detect the positions of the fiducial marks in the target image. Edges have the geometrical characteristics such as positions, lengths, and shapes. These features are suitable for finding the marks and have the advantages of lighting variations, model occlusion, as well as variations in scale and angle. The performance of the proposed system is validated through the alignment experiment using an display panel alignment system included X, Y axis, and rotatable stage.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.86-91
• /
• 2008

An integrated multidisciplinary analysis and design system plays a critical role in the preliminary design of an aircraft. In this work a system based on the CATIA is developed for multidisciplinary computational design; aerodynamics, elasticity, and radar frequency stealth. Common data base of geometry and rectangular grids is generated and used for aerodynamic and structural analysis, while derivative triangular grids are generated for the RCS calculation. The panel method (PANAIR), FEM (NASTRAN), and PO technique are used for aerodynamic, structural, and RF stealth computations, respectively, and several additional algorithms are developed for the effective communication of the common data.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.48-48
• /
• 2010

산화물 반도체를 이용한 TFT는 비교적 우수한 특성과 더불어 간단한 구조와 공정으로 양산성 확보에 유리한 측면 때문에 많은 주목을 받고 있다. TFT-LCD의 경우에는 기존에 사용되고 있는 a-Si;H TFT에 비하여 10배이상 우수한 이동도를 가진 산화물 TFT를 이용하여 고속동작 패널을 구현할 수 있을 것으로 보이며, AMOLED의 경우에는 poly-Si TFT에 비하여 대면적 공정에서 유리한 측면이 있을 수 있다. 이러한 산화물 반도체 TFT를 상용 디스플레이 패널에 적용하기 위해서는 소자 안정성을 좀더 확보해야 하는 숙제가 남아있다. 한편, 산화물 반도체 TFT는 가시광선 영역에서 투명한 특성이 가지고 있기 때문에 이를 이용하여 투명 디스플레이(투명 AMOLED)를 개발하는 경우 투과도를 크게 증가시킬 수 있는 장점을 가지고 있다. 기존의 투명 디스플레이는 주로 투사방법을 이용하여 구현되었지만, 최근 AMOLED를 이용한 투명 디스플레이 시제품이 시연되고 있다. 투명한 AMOLED를 구성하기 위해서는 OLED뿐만 아니라 백플레인에서의 투과도 증대를 위하여 해결해야할 여러 가지 문제가 발생하게 된다. 본 발표에서는 산화물 TFT에서의 최근 이슈에 대해 살펴보고, 투명 디스플레이에의 적용에 있어서 해결해야 할 문제점에 대해서도 살펴보고자 한다.