• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.479-486
• /
• 2011

In this study, we conducted experiment and finite element analysis on the flexural behavior of the round concrete panels according to the evaluation method of biaxial flexural tensile strengths. The Round Panel Test (RPT) and the Biaxial Flexure Test (BFT) were used to determine the biaxial flexural strength of round plain concrete panels. In order to understand the stress distribution on the panels, we measured load-strain relationship at the center of the panels' bottom surface. Test results show that fracture pattern in RPT and BFT panels are similar, and the tensile stress distribution is uniform in all directions at the center of the bottom surface of the panels for both RPT and BFT. The distribution of stresses in two test specimens coincided with the analysis result. The average biaxial flexural strength of RPT is about 29% greater than those of the BFT. The coefficient of variations (COV) of the RPT and BFT for the biaxial flexure strength is 8%, 6%, respectively, which indicates that BFT method is useful and reliable for determining biaxial flexural strengths of the concrete.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.31-41
• /
• 1997

This paper describes a potential-based panel method formulated for the prediction of the steady performance of a waterjet propulsor. The method employs normal dipoles and sources distributed on the solid surfaces such as the impeller/stator blades, hub and duct, and normal dipoles in the shed wakes trailing the impeller and stator to represent the potential flow around the waterjet propulsor. To define a closed boundary surface, the inlet and outlet open boundary surfaces are introduced where the sources and dipoles are distributed. The kinematic boundary condition on the solid boundary surface is satisfied by requiring that the normal component of the total velocity should vanish. On the inlet surface, the total inflow flux into the duct is specified, and on the outlet surface the conservation of mass principle is applied to evaluate the source strength. The solid surfaces are discretized into a set of quadrilateral panel elements and the strengths of sources and dipoles are assumed constant at each panel. Applying this approximation to the boundary conditions leads to a set of simultaneous equations. Systematic numerical tests show that the present numerical method is fast and stable. In order to validate the present method, sample computations are carried out first for the case of a conventional axial flow fan which has a similar geometry as the waterjet propulsor, and then for the case of a waterjet propulsor on which experiments are carried out at KRISO(Korea Research Institute of Ships and Ocean Engineering).

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.507-511
• /
• 1994

Traditional and commercial soy sauces used for seasoning soups and cooked mungbean sprouts were evaluated for consumer preference. Table salt was included in sensory tests, because the consumer commonly used it for seasoning soups. Triangle tests with 30 trained panelists were used to evaluate differences between two soy sauces, and 9 point hedonic scale tests with 100 consumer panelists to evaluate the consumer preference. Taste of sea mustard, Chinese radish and dried pollack soups seasoned with the traditional soy sauce, commercial soy sauce for soup and table salt was significantly different. The consumer panel indicated that the commercial soy sauce for soup was most preferred and the traditional soy sauce least preferred. Taste of cooked mungbean sprouts seasoned with two sauces, prepared with either traditional or commercial soy sauces, was significantly different from each other, but the consumer panel could not detect the difference in preference.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.4
• /
• pp.400-410
• /
• 2021

This study analyzed the determinants of carbon dioxide emissions through the expanded STIRPAT model using panel data from 16 metropolitan cities and provinces in Korea from 2000 to 2019. After testing cross-sectional dependence and coefficient heterogeneity of panel data, we performed analysis using MG, CCEMG, and AMG estimation methods reflected these characteristics. The results of analysis using the AMG estimation method are as follows. The coefficients of income, population, and energy intensity were statistically significant with a positive sign, but urbanization was statistically insignificant. Reduction of carbon dioxide emissions in Korea can be achieved through an increase in energy efficiency and sustainable economic growth. It is necessary to establish a policy that can contribute to sustainable economic growth by inducing productivity improvement through technology innovation reducing carbon dioxide emissions in the long-term as well as building a low-carbon society through active development of carbon dioxide reduction technology.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.114-123
• /
• 2020

A high-order potential-based panel method based on Green's theorem, with piecewise-linear dipole strength on triangular panels, is formulated for the analysis of potential flow around a three-dimensional wing. Previous low-order panel methods adopt square panels with piecewise-constant dipole strength, which results in inherent errors. Square panels can not represent a high curvature lifting body, such as propellers, since the four vertices of the square panel do not locate at the same flat plane. Moreover the piecewise-constant dipole strength induces inevitable errors due to the steps in dipole strength between adjacent panels. In this paper a high-order panel method is formulated to improve accuracy by adopting a piecewise linear dipole strength on triangular panels. Firstly, the square panels are replaced by triangular panels in order to increase the geometric accuracy in representing the shape of the object with large curvature. Next, the step difference of the dipole strength between adjacent panels is removed by adopting piecewise-linear dipole strength on the triangular panels. The calculated results by the present method is compared with analytical ones for simple non-lifting geometries, such as ellipsoid. The results for an elliptic wing with zero thickness at finite angle of attack are compared with Jordan's results. The comparison shows reasonable agrements for the both lifting and non-lifting bodies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.276-280
• /
• 2008

The design technology to be developed in this study is technology related to the metal panel comer processing method of very high value-added, interior and exterior cladding material, in the architecture. This study is aimed at designing a Bending Die System that enables metal panel comer processing for the first time in Korea, by improving corrosion resistance (durability), weather resistance and elegances (design) for the connecting part of right angle cornering, where most serious problems occur in using metal steel plates of 2.5mm or thicker. This is used as a kind of metal ball and as architectural interior and exterior cladding material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.298-299
• /
• 2011

최근 입력소자로 활용되는 터치스크린은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 터치패널의 구현방식에 따라 저항막(Resistive) 방식, 정전용량(Capacitive) 방식, SAW (Surface Accoustic Wave; 초음파) 방식, IR (Infrared; 적외선) 방식등으로 구분된다. 특히 최근 관심을 받고 있는 IR 방식은 적외선이 사람의 눈에는 보이지 않으나, 직진성을 가지고 있어 장애물이 있으면 차단되는 특성을 이용한 방식이다. IR방식의 터치패널은 발광(Light emitting)소자와 수광(Light detecting)소자가 마주하도록 배치되어 터치에 의해 차단된 좌표를 인식하게 되며, ITO 필름 등이 필요 없어 Glass 1장으로도 구현이 가능하며 투과율이 우수하다. 이러한 IR 방식의 터치패널을 제작하기 위하여 사용된 IR 광검출기는 광학적 band-gap이 작은 박막물질을 필요로 한다. 본 연구에서는 IR 광검출을 위한 물질로 SiGe를 co-sputtering 기법을 이용하여 성장시켰다. 일반적으로 SiGe 박막을 성장시키기 위하여 저압화학기상증착법(low pressure chemical vapor deposition, LPCVD)이나 고진공 LPCVD를 사용하지만 본 연구에서는 CVD에 비하여 무독성이면서 환경친화적이고 초기투자비용이 낮은 증착장비인 sputtering을 이용하였다. 본 연구에서 성장된 SiGe 박막은 400$^{\circ}C$에서 rf plasma가 인가된 Ge과 dc plasma가 인가된 Si의 power를 조절하여 결정화도가 70% (Fig. 1)이고 결정성장방향이 (111)과 (220)방향으로 성장하는 SiGe 박막을 얻을 수 있었다. 본 논문에서는 co-sputtering 성장조건에 따라 성장된 SiGe의 박막 특성을 논의할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1518-1522
• /
• 2008

The design technology to be developed in this study is technology related to the metal panel corner processing method of very high value-added, interior and exterior cladding material, in the architecture. This study is aimed at designing a Bending Die System that enables metal panel corner processing for the first time in Korea, by improving corrosion resistance (durability), weather resistance and elegances (design) for the connecting part of right angle cornering, where most serious problems occur in using metal steel plates of 2.5mm or thicker. This is used as a kind of metal ball and as architectural interior and exterior cladding material.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.75-89
• /
• 2019

In the present work, structural analyses for light weight corrugate 3 layered sandwich panels are carried out. The mechanical properties of the sandwich panels are obtained using the modified analytical closed form based on a corrugated panel deformation and the homogenization scheme of an uniaxial composite. Subsequently, the mechanical properties estimated by the two aforementioned methods were employed for the numerical analyses for the corrugated sandwich panels under the specifically loading conditions, and a comparison between two methods was also made.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.41-50
• /
• 1993

This paper compares various potential based panel methods for the analysis of two-dimensional hydrofoil. The strength of singularity on each panel is assumed to be constant or linear. Robin boundary condition as well as Neumann and Dirichlet boundary conditions are applied to various formulations to evaluate the accuracies of the methods. Pressures and lifts are computed for various two-dimensional hydrofoil geometries and are compared with the analytic solutions. Extensive studies are performed on the local errors near the trailing edge, known to be sensitive to the foil geometry with sharp trailing edge and high camber. Robin boundary condition with the perturbation velocity potential formulation shows the best accuracy and convergence rate.