• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.462-462
• /
• 2010

유리기판상에 제작된 비휘발성 메모리의 블로킹 층으로 Al2O3 박막을 일반적으로 널리 사용되는 SiO2 대신 사용한 연구이다. 기본적인 Al2O3 박막의 특성을 확인하기 위해 MIS 형태의 구조를 제작한 후 전기적 특성을 확인하였으며, 또한 유리기판상에 제작하기 전 실리콘 웨이퍼상에 실제 제작할 비휘발성 메모리 소자를 제작하여 특성을 확인하였다. 마지막으로 거친 표면을 가진 LTPS 유리기판상에 제작하였으며, 이에 대한 전기적 특성을 확인하였다. 여러 특성 중 retention 특성의 경우 10년 후 약 45% 이상으로 디스플레이 장치에 충분히 사용될 수 있다.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.240-251
• /
• 2019

This study examined the manufacturing technology used for the flat iron axes excavated from Ulsan Hadae. Their microstructures were analyzed using metallurgical methods. In addition, a variety of manufacturing technologies were examined and compared using existing research materials on flat iron axes. As a result of analyzing ten flat iron axes, which were excavated in the order that they were laid out in a row in one of the wooden coffin tombs at Ulsan Hadae, Tomb No. 44, it was possible to classify the flat iron axe manufacturing technology and system into three types: 'pure iron - shape processing', 'pure iron - shape processing - carburizing', and 'pure iron - shape processing - carburizing - decarburizing.' All of the flat iron axes were produced by forging, and most of them were made by beating the pure iron into their shapes. In particular, a number of the flat iron axes were reinforced through a carburizing process after shaping the iron. This appears as steel products forming the basis of the steel industry at the time were commonly used as an intermediary material or currency. On the other hand, it was commonly found in all samples that the hardening was not performed after shaping or carburizing. Since the microstructure of the flat iron axes made of pure iron contained a large number of impure inclusions and the result of analyzing the components of the non-metal inclusions showed characteristics of slag which contains a mixture of glass phase and wustite, it is possible that low-temperature reduction was used in the refining process.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.125-135
• /
• 1993

고밀도 폴리에틸렌(High density polyethlene, HDPE)내에 차단성 수지인 나일론 (Nylon)이 분산된 블렌드의 모폴로지와 유기 용제에 대한 차단성에 대해 연구하였다. 나일 론이 구형, 실린더 및 판상 구조 형태를 가지며 분산된 블렌드를 가공조건을 변화시켜 제조 하였다. 블렌드의 모폴로지가 유기 용제의 차단성에 끼치는 영향을 알아보기 위하여 투과시 험을 하였으며 수치 모사를 통하여 투과도를 이론적으로 예측해 보았다. 동일한 나일론양에 서 분산상인 나일론이 구형 또는 실린더 형태를 갖는 경우 투과액에 대해 낮은 차단성을 보 이는데 반하여 판상구조를 갖게되는 경우에는 차단성이 크게 상승함을 관찰할수 있었다. 이 는 판상구조형태를 취함으로써 블렌드내에서의 투과액의 투과경로가 길어졌기 때문이다. 나 일론 층의 여러기하학적인 형태변화에 대해 GRM관계식 및 이를 수정한 식을 이용하여 투 과도를 예측하여 보았다. 나일론층의 중첩도가 높다고 가정한 경우가 중첩도를 낮게 생각한 경우에 비해 높은 차단성을 보임을 수정된 GRM 관계식을 통하여 알 수 있었다. 또한 나일 론 층의 폭이 증가할수록 그리고 두께가 감소할수록 높은 차단효과를 보임을 예측 할 수 있 었다.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.107-109
• /
• 2002

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.610-617
• /
• 2004

For preparation $\alpha$-Al$_2$O$_3$ platelets having 20 $\mu$m in average diameter and 0.2∼0.3 $\mu$m in thickness, we have prepared aluminum hydroxides gel by using aluminum sulfate and sodium sulfate as starting materials. In this study, we investigated the effect of the amount of sodium phosphate on particle size, morphology and thickness of $\alpha$-Al$_2$O$_3$ platelets. When sodium phosphate was not added to aluminum hydroxides gel, most of $\alpha$-Al$_2$O$_3$ platelets had hexagonal shape but the thickness was over 1.0 $\mu$m, and this sample was not adequate for pearlescent pigment. On the other hand, introduction of sodium phosphate caused an increase of aspect ratio (particle diameter/thickness) with a decrease in $\alpha$-Al$_2$O$_3$ platelet thickness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.125-125
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.473-478
• /
• 2002

${\alpha}-Al_2O_3$ platelets were synthesized by microwave heating the two different powder mixtures of $Al_2(SO_4)_3+2Na_2SO_4$ and ${\gamma}-Al_2O_3+2Na_2SO_4$ using flux method. DTA-TG, XRD and SEM were used to investigate the effect of microwave on the formation of ${\alpha}-Al_2O_3$ platelets. In the case of the mixture of $Al_2(SO_4)_3+2Na_2SO_4$, the microwave heated sample was ${\alpha}-Al_2O_3$ platelets composed of aggregates with smaller particle size compared to the conventionally heated sample. In the case of the mixture of ${\gamma}-Al_2O_3+2Na_2SO_4$, the temperature to form ${\alpha}-Al_2O_3$ platelets by the microwave heating was lower than that by the conventional heating and the morphology of the microwave heated sample was similar to that of the conventionally heated sample except that the microwave heated sample had smaller particle size compared to the conventionally heated sample.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.513-517
• /
• 2004

Porous alumina ceramics with aligned plate-shaped pores were fabricated by using thermoplastic microsphere in order to show the anisotropy in thermal conductivity. The mixed powder of alumina and microsphere was pressed under 15 MPa till 20$0^{\circ}C$ to deform polymer into platelet-shape and sintered at 1,00$0^{\circ}C$ for 1 h. The sintered specimen with 10 wt% microsphere has 45.3% porosity and the bending strength of 44 MPa. The microstructural investigation confirmed the pore structure of platelet-shape, the thermal conductivities for vertical and parallel directions are 3.803 W/mK and 7.818 W/mK, respectively, the ratio between two directions exceeds 2.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.292-298
• /
• 2002

Densified cordierite matrixes added alumina platelets were studied as a ceramic substrate material having a low thermal expansion coefficient, low dielectric constant and proper strength. Amorphous-type cordierite powders were filled with four kinds of alumina platelet powders in various compositions. All samples were sintered at $1300^{\circ}C$ for 2 h in an air atmosphere. Improved flexural strength of about 80 MPa, low dielectric constant of 5.0 at 1 MHz and low thermal expansion coefficient of $3.5 \times 10^{-6}/^{\circ}C$ were obtained by the control of the microstructure. Isolated micropores were formed in the matrix and the porosity was dependent on the platelet content and size. In the 10 vol% of alumina platelet content, the isolated micropores were 3~8 $\mu \textrm{m}$ in size, and an increase in dielectric constant by adding alumina platelet filler was inhibited by the micropores.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.99-116
• /
• 1999

Wooden hollow core flush door is one of the main products of furniture manufacturing and woodworking industries. Warping and buckling of the door is serious problems in service. It has been reported that warping is caused by differences of physical and mechanical properties of face and back of skin panel for the door. This study focused on the prediction of warping and buckling phenomena of the flush door using numerical models. Predictions from the models were also compared with the experimental results obtained from the doors with plywood and hardboard skin panels under various environmental conditions. Three elastic constitutive models, so called elastic beam model, plate model and plate-buckling model, were employed to predict warping and buckling of the doors. It was observed that warping was more pronounced in low humidity condition than in high humidity condition. The plate model considering Poisson's effect was reliable to predict warping more closely than elastic beam model in low humidity condition. The plate-buckling model, however, was the best in the fitting of predictions with the experimental results under high humidity condition because buckling was developed in face and back of skin panel at that condition.