• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.182-183
• /
• 2000

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.591-601
• /
• 2003

Because of their high out-of-plane and in-planes strength, trapezoidally corrugated plates have been increasingly used in buildings and bridges. If corrugated plates are used as the web of plate girders or prestressed concrete box girders, the flanges take most of the bending stress. On the other hand, the corrugated plate web supports shear stress due to the accordion effect. The corrugated plate web could fail by three different buckling modes: global, local, or interactive shear buckling. To determine the effects of geometric parameters on the buckling capacity of the corrugated plates, a parametric study was performed using finite dement method. The analysis results showed that the buckling capacity and modes depend on individual parameters as well as combinations of parameters.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.4
• /
• pp.11-17
• /
• 2010

본 논문의 주된 목적은 농업용 이동로 또는 농업용수의 공급을 위하여 사용되는 파형 강판 파이프아치 암거가 고속도로 및 지방국도를 통과할 때 설계 및 시공 시 요구되는 최소 토피 두께를 제안하는데 있다. 1998년 이후 농업용 목적으로 사용되는 파형 강판 암거는 서해안 고속도로의 건설과 더불어 그 수요량이 증가하였으며, 이에 따른 설계 및 시공의 빈도수 또한 지속적으로 증가하고 있는 추세이다. 그러나 이를 뒷받침 할 수 있는 국내 규정은 아직 미약한 실정이다. 따라서 본 연구에서는 파형 강판 암거의 설계 및 시공 시 고려해야 할 가장 중요한 인자 중 하나인 최소 토피에 대한 연구를 수행하고 그 두께를 제안하였다. 현재 국내 및 미국에서 사용되고 있는 최소 토피 두께는 암거의 스판 길이 또는 스판 길이와 암거의 높이 비율의 관계로부터 정해지는 것으로 구조적인 특성치를 포함하고 있지 않다. 제안된 최소 토피 두께는 암거의 형상적 특성, 설계 하중, 강판의 구조적특성과 손상 등을 반영하여 파형 강판 암거의 안전성을 극대화 하였다. 제안된 토피 두께는 미국과 국내 도로공사에서 규정하고 있는 토피 두께와 비교 분석하였으며, 그 결과 국내 규정이 더욱 안전성을 고려하고 있음을 알 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.707-715
• /
• 2005

Corrugated webs have been used for composite prestressed concrete box girder bridges. Innovative steel plate girders using corrugated webs have been proposed. It has been found that analytical and experimental researches conducted to determine the strength of trapezoidally corrugated webs can fail with respect to three different buckling modes: local, global, and interactive shear buckling. Shear buckling capacity equations based on classical and orthotropic plate buckling theories have been proposed,but these equations show some differences. In this paper, geometric parameters that influence interactive shear buckling behavior with interaction effects are identified via extensive bifurcation buckling analysis using the finite element meth.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.334-342
• /
• 2005

In this Paper. a time-domain geoacoustic inversion was performed using the bulb signals measured during MがU. 04 experiment conducted in the East Sea of Korea in 2004. An obiective function was defined as a direct cross-correlation between the measured and the simulated signals in time domain. The ray theory was used to model the wave propagation in time domain and optimizations were Performed using VFSA (very fast simulated annealing) algorithm. Comparison of inversion results with those from transmission loss matching (an accompanying paper in this issue of the Journal of the Acoustical Society of Korea) shows that Parameters are consistently inverted. Direct time series comparisons between the measured signals and the simulated signals are Presented based on inversion results.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.81-91
• /
• 2006

The corrugated web is a plate that was manufactured with a corrugated shape. It is widely used in bridges, buildings, and culverts. A girder with a corrugated web can be crippled by local, in-plane compressive loads. Due to its high out-of-plane strength, however, a stiffener is usually not needed in trapezoidally corrugated plates, and the corrugated profile of the web can change the boundary condition of the edge load. Some researchers have studied the strength of the partial-edge loading of the trapezoidally corrugated web, but they have not considered the profile of corrugation in their studies. This paper investigates the influence of the corrugate profile. A parametric study was conducted on the shape parameter using the finite-element method. In this parametric study, the relationship between the corrugated shape and the partial-edge strength was also investigated by dividing the partial-edge strength into the web capacity and the flange capacity.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2002

Directional breaking waves are generated by the component wave focusing both in direction and frequency based on constant wave steepness and constant wave amplitude spectrum models. The generated breaking waves are classified in the incipient, single and multi breaking waves. The characteristics of directional breaking waves are investigated in terms of surface profile parameters of wave crest steepness and asymmetry. The evolution of breaking wave characteristics is analyzed in a view of focusing efficiency. It shows that the front steepness and vertical asymmetry play an important role in breaking process, while the crest rear steepness and horizontal asymmetry are nearly constant during the process. The superposition of directional components greatly enhances the focusing efficiency and it suggests that characteristics of directional breaking waves may significantly different from uni-directional ones.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.463-472
• /
• 2007

This paper presents theoretical and finite element analysis results for the lateral-torsional buckling of I-girders with corrugated web under uniform bending. Lateral-torsional buckling is a major design aspect for flexural members composed of thin-walled I-section. However, torsional rigidities such as the warping constants of the I-girders with corrugated web are not fully understood yet. In this paper, bending and pure torsional rigidities of I-girders with corrugated web are first described using the results of previous researchers. Then, the location of the shear center and the warping constants are derived. Using the derived section properties of I-girders with corrugated web, the lateral-torsional buckling strength is determined. Finite element analyses are conducted and the proposed lateral-torsional buckling strength of I-girders with corrugated web is successfully verified. Finally, the effects of corrugation profiles of the web on the lateral-torsional buckling load of I-girders with corrugated web are discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.41-48
• /
• 2002

The bandwidth limitation of traveling-wave electroabsorption modulator(TW-EAM) is determined by the transit time, the velocity-mismatch between optical-wave and microwave, the impedance-matching, the dispersion and the microwave loss. In this paper, we introduce an hovel impulse response of TW-EAM considering transit time as well as velocity-mismatch. We analyze the effect of transit-time and velocity-mismatch at the same time, using the FDTD method. We investigate the modulation bandwidth by changing the depth of the intrinsic region. We suggest that the optimum depth of the intrinsic region is 0.2${\mu}{\textrm}{m}$ when the absorption coefficient($\alpha$) is 0.2${\mu}{\textrm}{m}$-1.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.77-84
• /
• 2007

The elastic buckling strength of a corrugated pipe made of orthotropic material was evaluated. The height and length of a corrugated wave and the thickness of the pipe were considered as factors affecting the buckling strength of the pipe. And also, the ratio of the longitudinal stiffness and transverse stiffness were considered as parameters affecting on the buckling strength of a pipe made of orthotropic material. Buckling strengths of various corrugated pipes with different shapes and stiffness ratio were evaluated by FE analyses. And a formula to estimate the elastic buckling strength was suggested by regression of FE analysis results. Analysis results show that a corrugated pipe has superior buckling strength to a general flat pipe and the suggested formula estimates accurate buckling strength of the corrugated pipe made of orthotropic material.