• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.585-588
• /
• 2008

Resistance to lateral torsional buckling of steel I-girder (open section) is a very important design requirement. But, most studies of steel I-girder with corrugated webs were invested in shear behavior. Until now, most studies about Lateral torsional buckling of I-girder with corrugated webs have been based on Lindner.J's study. the study includes that the pure torsional constant of I-girder with corrugated webs doesn't different from that of I-girder with flat webs. This paper pesents pure torsional constant I-girder with sinusoidally corrugated webs by using finite element analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.1
• /
• pp.27-36
• /
• 1993

FM방식의 악기음원합성은 해당 악기의 음색과 음정에 맞는 FM의 기본 주파수와 변조 계수를 정하여 신호 파형을 생성하는 것으로, 다른 가, 감산방식 또는 PCM방식 등에 비해 비교적 간단한 구조로 다양한 악기음원합성이 가능하다. 따라서 현재 사용되고 있는 개인용 컴퓨터에 부착되는 사운드합성 카드에는 FM방식 음원합성기술이 적용되고 있다. 본 논문에서는 FM방식 음원합성기술을 이용하여 실시간 악기음원합성이 가능한 논리회로를 설계하는데 관한 연구를 기술한다. 본 연구에서는 소프트웨어 프로그래밍에 의해 FM방식 음원합성기의 구조를 설계하고 주요 블록의 최적 변수 값을 실험하였다. 논리회로 설계 및 회로검증은 향후 주문형반도체(ASIC:Application Specific Integrated Circuit)제작을 위해 기존의 표준셀 라이브러리와 주문형반도체 전용 설계시스템을 사용하였다. 회로검증 결과는 간이 평가보드를 제작하고 PC와 접속시켜 생성된 악기음을 직접듣는 주관적 평가방법으로 최종 확인하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.87-94
• /
• 2020

A corrugated steel plate wall (CSPW) system is advantageous to secure the strength and stiffness required for lateral force resistance because of its high out-of-plane stability. It can also stably dissipate large amounts of energy even after peak strength. In this paper, a preliminary study has been carried out to use the CSPW system in the seismic retrofit of existing reinforced concrete (RC) moment frame buildings. The seismic performance for an example building was evaluated, and then a step-by-step retrofit design procedure for the CSPW was proposed. An equivalent analytical model of the CSPW was also introduced for a practical analysis of the retrofitted building, and the strengthening effect was finally evaluated based on the results of nonlinear analysis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.41-47
• /
• 2004

In this paper, we analyze the microwave characteristics of traveling-wave electro-absorption modulator (TW-EAM) considering the microwave feedline and the impedance mismatch. The TW-EAM is analyzed by using the equivalent circuit model. The capacitance and the inductance of the equivalent circuit are evaluated by using 3-dimensional finite difference time domain (FDTD) method, while the microwave feedline is analyzed by momentum method. In a viewpoint of microwave characteristics, we present the effect of the structure and the length of microwave feedline.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.513-520
• /
• 2003

As a trapezoidal corrugated steel plate has the sufficient stiffness out of plane direction without shear stiffener or thick plate, a use in the web of bridge structure is on the increase. However, there are no domestic design guides for shear buckling strength of corrugated plates. Therefore, foreign design specifications are analyzed about application methods and a numerical parametric study is used to get the relationship of the shear strength and geometric boundary conditions for corrugated plates. Elastic buckling finite element analysis is executed through eigenvalue analysis using the eight nodes five freedoms thin shell element. Parameters such as the width and height of panel and the thickness and height of web, are determined considering the factors to influence on the buckling of corrugated plate. Accuracy of shear buckling analysis is evaluated with theory of foreign buckling equations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.111-118
• /
• 2006

The elastic buckling strength of a corrugated culvert made of orthotropic material such as FRP was evaluated. The height and length of a corrugated wave and the thickness of the culvert were considered as factors affecting the buckling strength of the culvert. And also, the ratio of the longitudinal stiffness and transverse stiffness was considered as the parameter affecting on the buckling strength of the used orthotropic material. Buckling strengths of various corrugated culvert models with different shapes and stiffness ratio were evaluated by FE analyses and a formula to estimate the elastic buckling strength was suggested from the regression with FE analysis results. Analysis results show that a corrugated culvert has superior buckling strength to a general flat pipe and the suggested formula estimates accurate buckling strength of the corrugated culverts made of orthotropic material.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.77-86
• /
• 1996

We employ the SOR method to analyze CPW electrodes of Ti:$LiNbO_3$ Mach-Zehnder traveling-wave optical modulator in the tapered region of an optical modulator. In the tapered region of the modulator, we design the electrodes satisfying $Z_c=50{\Omega}$. In the modulation region, we find two find sets of design parameters. One set is for $Z_c=50{\Omega}$, $n_{eff}=2.26$ and the another is for $n_{eff}=2.2$, $Z_c=47.7{\Omega}$.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.1
• /
• pp.101-108
• /
• 2018

The purpose of this study was to analyze some parameters' effects on buckling behavior of Sinusoidal Corrugated Web using finite element analysis program. Studying buckling behavior is one of the most important things to design sinusoidal corrugated web girders and predict the shear performance. In this paper, Four parameters of Sinusoidal Corrugated Web, which are thickness($t_w$), height($h_w$), wave height(${\alpha}_3$) and wave length(w), were selected for buckling behavior analysis. Via buckling analysis, it is shown that $t_w$, $h_w$ and ${\alpha}_3$ have influence on shear buckling stress, Initial stiffness and reduced strength after buckling.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.385-388
• /
• 2002

현재 복부용 초음파 진단장치에 가장 일반적으로 사용 되고 있는 3.5MHz의 굴곡형 선형배열(curved linear array) 탐촉자에 대하여, 탐촉자 요소의 폭과 높이, 측 방향 및 높이 방향의 곡률 반경 둥의 구조적인 파라메터 변화가 음장에 미치는 영향을 시물레이션을 통하여 체계적으로 해석하였다. 시물레이션에 있어서, 탐촉자는 128개의 요소변환자 중 32개에 의해 초음파 빔을 형성하며, 매질 중에 방사된 파형은 코사인 포락선을 갖는 3주기의 펄스인 것으로 일정하게 가정하였다. 시뮬레이션의 결과, 탐촉자의 측 방향 및 높이 방향 곡률보다는 탐촉자 요소의 폭 및 개구높이가 음장에 더 많은 영향을 미치고 있음을 알 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.311-312
• /
• 2019

본 논문에서는 직렬-직렬(SS) 보상 구조를 가지는 양방향 무선전력전송 시스템의 비통신 전력전송 제어 방법에 대해 소개한다. 또한 2차단에서의 전력 전달 제어에 1차단의 위상의 필요함을 보이며, 이를 도출하기 위한 20kHz 전류 센싱 방법에 대해서 다룬다. 시뮬레이션과 실험 파형을 통해 소개한 제어 변수와 고주파수 전류 신호 센싱의 방법의 타당성을 증명하였다.