• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.24-32
• /
• 2007

Laser surface hardening is beneficially used for surface treatment of structural steel. Due to very rapid heating and cooling rates, structural low-alloy steel(SCM4) can be hardened as self quenching. The aim of this research project is to improve the influence of the process laser parameters: laser power, spot size, surface roughness, and traverse speed. The laser beam is allowed to scan on the surface of the workpiece at the constant power(1095W), varying the traverse speed at 0.3m/min, 0.5m/min and 0.8m/min. The optical lens with the elliptical profile is designed to obtain a wide surface hardening area with uniform hardness. From the results of the experiment, it has been shown that the stable hardness is about 600$\sim$700Hv, when the laser power, focal position and the traverse speed are P=1095W, z=0mm and v=0.3m/min.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.94-101
• /
• 1995

In this paper, a new vocal cords model, called a four-mass model, is proposed for a hoarse speech mechanism. Pathological changes of vocal cords cause hoarse speech and glottal waveform reflects motion states of vocal cords. From these facts, we assumed that the morbid vocal cords be dissymmetric and take the four-mass type. The glottal waveforms and the model parameters of normal and hoarse speech signals are analyzed, and some relations bet ween the model parameters and the hoarse pathology are discussed. Experimental results show that the new research method of hoarse speech can reveal relations between the acoustic features of hoarse speech and the hoarse pathology, and be used to diagnose laryngeal diseases and to improve tone quality of hoarse speech.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.119-123
• /
• 2002

실제의 브러시리스 직류 전동기의 역기전력 파형은 고가의 정밀 서보 전동기를 제외했을 때, 이상적인 사다리꼴이나 정현파의 형태가 아닌 그 형태에 근접한 모양을 갖는다. 하지만 브러시리스 직류 전동기의 운전은 역기전력 파형을 이상적이라고 가정하여 사다리꼴인 경우는 3상 2여자 직류 제어를 하고, 정현파인 경우에는 3상 3여자 교류 제어를 하는 것이 일반적이다. 일반적인 3상 3여자 운전은 3상 2여자 운전에 비해 공간 자계의 높은 분해능을 제공하고, 3상 2여자 운전에서 구조적으로 나타날 수밖에 없는 정류 시의 토크 리플도 발생하지 않는 장점을 갖는다. 따라서 본 논문에서는 위의 두 측면을 고려하여, 즉 이상적인 형태의 역기전력 형태를 갖지 않는 실제 전동기의 특성과 3상 3여자 운전의 특성을 적용하여, 역기전력의 형태에 상관없이 적용할 수 있는 3상 3여자 직류 제어 방법을 제안하고 이에 대한 센서리스 운전을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.78-80
• /
• 2018

본 논문은 용량성 결합 플라즈마 응용 시스템을 위한 전류형 토폴로지 기반의 전력 변환장치 구조를 제안한다. 제안된 시스템은 독립적으로 제어된 두 개의 고 정밀 펄스 전류를 부하로 출력하는 병렬 연결된 전류형 전력 변환장치로 구성된다. 전체 회로 토폴로지는 네 가지 세부 부분; 바이어스 전류 발생기, 바이어스 전류 모듈레이터, 슬롭 전류 발생기, 슬롭 전류 모듈레이터로 구성되어 있다. 제안된 시스템은 빠른 과도 특성을 위해 1200V/90A급 SiC MOSFET 스위치를 사용하였다. 제안된 전력 변환장치는 4.5kV의 출력전압, 40A급 출력전류와 100ns급 전류 상승/하강 특성을 충족시키도록 설계되었다. 본 연구는 펄스 전류형 전력 변환회로를 제안함으로써 전압형 전력 변환장치에 비해 전압 스파이크 및 전압 파형 왜곡을 줄여 보다 정확한 출력 전압을 발생시킴으로써 용량성 결합 플라즈마 시스템의 안정도 및 정밀도를 향상시킬 수 있다.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.947-954
• /
• 2005

In this study, laboratory measurements are presented for run-up heights and overtopping of water waves on slopes of rubble-mound breakwaters armored with tetrapods. The effects of wave steepness, surf similarity and wave period on the run-up height and overtopping are investigated in detail. A measurements. A very reasonable agreement is observed. A slopes of breakwaters become milder, run-up heights become smaller. The overtopping rate also is considerably rate also is considerably affected by wave steepness and period.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.139-144
• /
• 2013

A computer program has been developed to estimate time-domain electromagnetic (EM) responses for a onedimensional model with multiple source and receiver dipoles that are finite in length. The time-domain solution can be obtained by applying an inverse fast Fourier transform (FFT) to frequency-domain fields for efficiency. Frequency-domain responses are first obtained for 10 logarithmically equidistant frequencies per decade, and then cubic spline interpolated to get the FFT input. In the case of phases, the phase curve must be made to be continuous prior to the spline interpolation. The spline interpolated data are convolved with a source current waveform prior to FFT. In this paper, only a step-off waveform is considered. This time-domain code is verified with an analytic solution and EM responses for a marine hydrocarbon reservoir model. Through these comparisons, we can confirm that the accuracy of the developed program is fairly high.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.24-31
• /
• 2020

In this paper, the deep convolutional neural network for sound event detection is studied. Especially, the end-to-end neural network, which generates the detection results from the input audio waveform, is studied for weakly supervised problem that includes weakly-labeled and unlabeled dataset. The proposed system is based on the network structure that consists of deeply-stacked 1-dimensional convolutional neural networks, and enhanced by the skip connection and gating mechanism. Additionally, the proposed system is enhanced by the sound event detection and post processings, and the training step using the mean-teacher model is added to deal with the weakly supervised data. The proposed system was evaluated by the Detection and Classification of Acoustic Scenes and Events (DCASE) 2019 Task 4 dataset, and the result shows that the proposed system has F₁-scores of 54 % (segment-based) and 32 % (event-based).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.43-49
• /
• 2020

In this study, the stability of the low crested structure armoured by Tripod block has been investigated using two-dimensional hydraulic model tests. The effect of wave steepness and freeboard on the rock stability on crest, front, and the rear slope has been investigated. From the experimental data, the new empirical formula for the stability coefficients of the Tripod block was proposed. But Tripod is not proper to use the armour block of the low crested structure because the uplift force of this block is greater than that of Tetrapod and rock.

• Geophysics and Geophysical Exploration
• /
• v.13 no.2
• /
• pp.137-143
• /
• 2010

An earthquake with local magnitude $(M_L)$ 3.7 on December 9, 2000 occurred offshore Yeongdeok area, South Korea. In case of applying Chang and Baag (2006) crustal velocity model, the epicenter is $36.4462^{\circ}N\;and\;129.9789^{\circ}E$, which belongs to the inside of the Korean Peninsula Continental Shelf. Although we use the modified model reducing crustal thickness of Chang and Baag (2006) model by 5 km considering the transition from continental crust to oceanic crust in the East Sea, the epicenter was little changed. We carried out the waveform inversion analysis to estimate focal depth and focal mechanism of this event. The focal depth is estimated to be 11 ~ 12 km. The seismic moment is estimated to be $1.0{\times}10^{15}N{\cdot}m$, and this value corresponds to the moment magnitude $(M_W)$ 3.9. The offshore Yeongdeok event including May 29, 2004 offshore Uljin one show typical thrust faulting, and the direction of P-axis is ESE-WNW. The moment magnitude estimated by the spectral analysis is 4.0, which is similar to that by the waveform inversion analysis. Average stress drop is estimated to be 3.4 MPa.