• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1361-1371
• /
• 1993

The effort of this paper is to develop a methodology of computer aided design and manufacture of spatial cams. The integrated CAD/CAM systems for spatial cams are developed to enable manufacturer to design and machine them readily. The contour of spatial cams can be obtained by applying envelope theory to the cam/follower motion. The mathematical cam contour is evaluated at some increment to generate the numerical data for the CNC programming. Incremental generation of points along a cam contour can be accomplished in consideration with the specified tolerance. The computerized procedure is described in detail with accompanying examples.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.93-100
• /
• 1994

5-axis CNC machining is being used in the manufacturing of tire mold, screw, and turbine blade because it can produce complex workpiece more efficiently and accurately than 3-axis CNC machining does. However, it is difficult to calculate the CL data in 5-axis CNC machining. This paper describes an efficient method to modify and edit the NC code and a data structure for representation of the workpiece produced by 5-axis CNC machining. Wireframe display of tool path and shading display of workpiece are used to represent verification results. Machining errors can be evaluated quantitively using the data structure based on the workpiece data model. The methods are implemented in a program with a IBM-PC and MS-Windows.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.341-349
• /
• 2002

The target controlled infusion(TCI) pump system is a logical approach to the development of improved administration techniques of an intravenous anaesthetic agent. The principle of TCI system is based on an understanding of the pharmacokinetic properties, three or four compartment model. The TCI system is optimal and flexible control of the plasma drug concentration. But the clinical goal is always to achieve a therapeutic drug effect, not a therapeutic concentration. So we developed the algorithm to target the concentration at the site of drug effect rather than the concentration in the plasma. If impulse drug is inputted into body, the decline of plasma concentration with time is shown, resulting in the expression of the differential equation. Therefore, we must reformulate our three-compartment model as four-compartment model with the effect compartment. And we tested plasma targeting and effect targeting algorithm by computer simulation using four-compartment model. So we developed the TCI capable of applying all intravenous drugs by adjusting individual pharmacokinetic parameters independently.

• The KIPS Transactions:PartD
• /
• v.9D no.3
• /
• pp.427-434
• /
• 2002

For effective distributed software development, integrated information object management functions that manage the structures and relationships among information objects are most required. Presented in this paper is a managerial framework comprised of BOC (Bill Of Class) and part dictionary scheme for integrated information object management in distributed software development processes. Based on the proposed BOC and part dictionary scheme, an integrated information object management system is designed and implemented. As a result of this implementation work, the usefulness and benefit of proposed framework are also shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1462-1468
• /
• 2014

Xe gas is moved to target from GPM. It is used to feasible nuclear reaction from proton of 30MeV cyclotron being investigated by the Xe-124 gas target system. This system is divided into four parts. The hardware system was constructed by solidworks 3-D CAD and Helium supply is to cool the Havor foil. The Cooling water has the job of cooling down the temperature when Xe gas is being investigated in the target. Temperature and pressure gauges are attached to be checked easily. GPM has the part that prepares to transport Xe gas. There are storage vessel that stores Xe gas, the cold trap that filters humidity and impurity and lastly storage vessel that temporarily stores Xe gas. HCS using the helium is to clean and cool for each part. These parts are configured with SIEMENS PLC and PcVue monitoring program for more comfortable and easy maintenance.

• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.62-78
• /
• 2009

Recently, construction techniques have been rapidly developed with reconstruction of old buildings, urban regeneration and efforts of restoring natural ecology, so demolition of deteriorated buildings has been rapidly increasing. Demolition work of building should be executed without damaging surrounding environments according to relevant regulations. There are various demolition methods and among them, explosives demolition is the most practical way for expenses and safety of work. As a part of Daejeon stream ecological restoration project, this thesis is a case of executing demolition of Chung-Ang Department Store which was built 35 years ago as covered structure on the upper part of Daejeon stream with explosives demolition. This structure is 8 stories high, total height of 41.6 m including basement floor, $1,650m^2$ for building area and $18,351m^2$ for total floor area. It is located in the center of Daejeon city where shopping centers and buildings are crowded and main facilities are Daejeon subway (18m), backside shopping center (20m), underground shopping center(15m), Mokchuk bridge, Eunjung bridge(0.25m) and fiber-optic cable(0.25m). In this project, implosion was selected for explosives demolition methods by considering this area being a busy urban area, and this project was executed after examining collapse movement of structure in advance using simulation program not to damage main facilities. Total 80kg of explosives and 1,000 detonators were being used. This project will be a good case of executing explosives demolition successfully by applying implosion on urban area in the country.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.682-685
• /
• 2010

KSLV-I is the 1st Korean satellite launch vehicle, which was launched at Naro space center by Korea Aerospace Research Institute (KARI) in AUG. 2009, and JUN. 2010. Although the missions of 1st and 2nd launch of KSLV-I were not successful, safety of launch vehicle was accomplished through the cooperation with the Russian partner Khrunichev Space Research and Production Center (KhSC). Both parties co-developed the technical safety management program to ensure launch safety. In this paper, the analysis and contents of safety program are illustrated.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.59-66
• /
• 1999

원자력발전의 고유한 문제점을 해결할 수 있는 새로운 집적폐회로형 AMBIDEXTER 원자력시스템 개념을 제안하였다. 이 복합시스템은 일체형 원자로를 중심으로 열/에너지 변환회로와 방사선/물질 수송회로를 서로 독립적으로 구성하므로 최소 방사선 위험부담 아래서 원자력에너지의 잇점을 극대화하는 설계이다. 특히 방사선/물질 수송회로로부터 분리된 고준위 방사성 폐기물에서 고부가가치 동위원소나 방사선원을 선별적으로 용이하게 추출, 활용할 수 있다. 원자로 계통은 얇고 큰 Hastelloy 합금 원자로용기 내부를 노심, 침니, 열교환기, 다운캄어 및 입구플레넘 콤파트먼트로 분할하여 배관이나 벨브관이 없으므로 기기파손으로 인한 방사성물질의 대량 외부 누출은 불가능하다. Th/233U 용융염핵연료의 핵물리 및 열수력학적 특성을 살려 AMBIDEXTER 노심의 핵적 자활성 설계에 융통성을 부여하는 변성핵연료주기를 도입하면 핵연료자원의 공급 안정화나 핵확산방지의 투명성 제고에 큰 효과가 있다. AMBIDEXTER 설계연구에 관련된 핵심기술들은 일찍이 미국 ORNL에서 시작한 MSR 프로그램을 통해 개발되어 이미 대부분 상용화하고 있기 때문에 현재 추진 중인 250 MWth급 원형로 모듈의 개념개발에서는 주로 시스템 통합에 관한 문제들이 중점적으로 다루어진다.

• Journal of Welding and Joining
• /
• v.9 no.3
• /
• pp.52-61
• /
• 1991

In the recent years the computer-numerical controlled cutting process such as a plasma arc cutting and a laser cutting is widely applied to reduce the time and cost expense for generating NC part program of the parts to be cut. In the present study, a CAD system(C-CAD) was developed to generate automatically the NC part programs with CLDAT(Cutter Location Data)for the CNC plasma arc cutting system. The NC part programs are composed of the 2-dimensional drawing of the parts to be cut and the technological data. The shape data of the parts drawn in the Auto-CAD can be also used in the C-CAD, since the data file generated by the C-CAD is compatible with that by the Auto-CAD. In order to check its applicability, the C-CAD and CAM system were applied to cut the parts, and which showed the satisfactory results.

• 한국정보교육학회:학술대회논문집
• /
• 2007.08a
• /
• pp.273-279
• /
• 2007

수학은 생활의 기본이 되는 도구 교과이다. 그 중에서 아동들이 가장 중요하지만 어려워하고 후속 학습에까지 영향을 미치는 것은 구구단이다. 고학년이 되어서까지 곱셈 구구를 못 외우는 학생들은 지도가 어려울 뿐만 아니라 이후에도 지속적으로 수학 학습에서 뒤떨어지게 된다. 하지만 암기가 중심이 되는 부분이라 다른 것들보다 학습의 흥미가 떨어지고 시기를 놓치면 학습이 점점 더 어려워지는 단점이 있다. 이에 지금까지 어려웠던 어렵고 암기위주로 흘러가던 구구단을 음악과 연결시켜 보는 것은 어떨까란 생각을 하게 되었다. 여기에서 쓰이는 음악들은 모두 초등학교 교과서에 있는 음악으로 아동들이 친숙하게 느낄 수 있는 음악들이다. 이 소프트웨어는 2학년 뿐만 아니라 구구단을 어렵게 느끼는 고학년의 학습에도 도움이 되도록 제작하였다. 프로그램은 전체 구구단인 2$\sim$9단을 다루도록 하였으며, 각 단은 4개의 파트로 구성되어 있다. 1단계에서는 1-각 수까지 반복해서 세는 연습을 하였고, 2단계에서는 반복했던 수를 연결하여 띄어세기 연습, 3단계에서는 2단계에서 했던 띄어세기를 확장하여 구구단 연습을 해 볼 수 있도록 하였다. 정리단계에서는 각단의 구구단을 랜덤으로 배치하여 구구단의 복습이 될 수 있도록 하였다. 2,4,5,6,8단은 각기 박자에 맞춰서 구구단을 외우는 것이고 5,7 단은 박자에 맞추기 어려우므로 글자수에 맞춰서 구구단을 외우도록 하였다. 박자에 맞추는 것이 주가 아니라 수학을 배우는 것이 중심이므로 틀린 박자에 맞는 숫자를 누르는 것은 반응하지 않도록 하였다. 구구단 중간에 있는 수까지를 전부 제시함으로써 큰수와 띄어세기 그리고 구구단과의 관계를 이해할 수 있도록 하였다.