• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.747-750
• /
• 2009

국내에서 파인 블랭킹 프레스는 대기업이나 중소기업, 국책 연구소 등 개발에 성공한 곳은 어느 곳도 없다. 국내에서는 최초로 S사에서 자체의 기술로 400톤 파인 블랭킹 프레스를 설계, 제작, 조립하여 개발하였다. 700톤 파인 블랭킹 프레스의 개발로 인하여 수입에만 의존한 것을 국산화하여 원가절감 및 국제 경쟁력 강화에 기여할 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.824-827
• /
• 2011

본 논문에서는 자동차 시트 리클라이너 기어의 파인 블랭킹 성형 실험을 통하여 V-링 설치 위치에 따른 기어의 다이 롤 높이 변화를 검토하였다. 3 종류의 다이 편과 가이드 플레이트 편을 설계하여 파인 블랭킹 금형을 제작하였으며 650 ton 파인블랭킹 프레스에서 성형 실험을 수행하였다. 실험으로부터 제품을 취출하여 다이 롤 높이를 측정하여 분석한 결과 기어 모듈과 관계없이 V-링 설치 위치가 가이드 플레이트에서 멀어짐에 따라 다이 롤 높이가 증가함을 파악할 수 있었다. 이와 같은 결과는 향후 파인 블랭킹 금형의 V-링을 설계할 때 다이 롤 높이를 최소화하기 위하여 유용하게 활용될 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.565-570
• /
• 2011

There is always die roll in fine blanking parts which is able to have 100% clean shear surface. In this paper the change of die roll size was studied by fine blanking tryout in order to minimize die roll size. Various die inserts with different die chamfer were machined, fine blanking die was manufactured and tested. The die roll sizes of fine blanking samples were measured and the tendency of thickness directional die roll size was comprehended. This result will be used on the design of die chamfer in order to minimize thickness directional die roll size of fine blanking parts

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.757-762
• /
• 1994

본 연구에서는 정밀진단가공을 위한 파인 블랭킹 기술 개발을 위한 파인 블랭킹용 전용 프레스를 사용 하지 않고 범용 유압 프레스에서 조보 유압 장치에 의해 압력을 조절해가면서 가공특성에 관한 실험적 연구와 이론 해석을 수행한다. 실험을 위해 파인 블랭킹 금형과 유압 장치를 설계 제작하고, 정밀진단 특성에 제일 큰 영향을 미치고 있는 V-돌기( Vee-ring)의 유무와 위치 그리고 스트리핑력 및 카운터 펀 칭력 변화에 따른 제품 정밀도를 조사해 가면서 최적의 정밀도 예측 수단으로 적절함을 확인할 수 있었으며, 실험결과는 작업 조건에 관계없이 모든 제품이 깨끗한 전단면을 나타내고 있으며, 일반적으로 스트리핑력이 감소할수록, 그리고 카운터 펀칭력이 증가할수록 캠버량이 감소하고 특히 카운터 펀칭력에 큰 영향을 받고 있음을 알 수 있었다. 이와같은 현상은 유한 요소해석에 의한 캠버량의 예측에섣고 정성적으로 잘 일치하고 있는 것으로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2009-2014
• /
• 2012

It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.7-7
• /
• 2000

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.102-108
• /
• 2000

A finite element analysis has been performed to investigate the effect of v-ring indenter on the sheared surface in the fine blanking of a pawl which is a part of the automotive safety belt and is made of S45C sheet. In the present analysis the Cockcroft and latham fracture criterion and the element kill method are used in order to simulate the blanking operation successfully. The simulation results are obtained for various positions and heights of the v-ring indenter. And the theoretical results are compared with available experimental results. It is shown that this FEM simulation result can be useful for predicting the optimal fine blanking condition of real products.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.598-602
• /
• 1996

This study is performed for investigating the effects of stripping and counter punching force on shearing characteristics in fine blanking, such as camber, burr-height and dimensional accuracy, etc by experiments. Conventional hydraulic press equipped with specially designed hydraulic unit is used for experiments so that both the stripping force and counter punching force are arbitrarily adjusted according to experimental conditions. Two kinds of materials, hot rolled steel sheet(1mm, 3mm) and pure aluminum(1mm, 3mm) are selected in order to examine the influence of strength and thickness of working materials in blanking of T-shaped products. Based on the experimental results of this study, it can be concluded that the finely cut surface of sheared blank can be obtained even in conventional hydraulic press if additional equipments and special dies are employed.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.157-163
• /
• 1996

This paper is concered on the development of low-cost fine blanking die with two fluid chambers of which the pressure can be controlled by a hydraulic unit and its application to producting circular blanks in a conventional hydraulic press, not in a special triple-action press usually adopte in fine blanking operation. Four important working parameters affecting on the precision accuracy of products such as existence and position of Vee-ring, stripping force and counter punching force are primarily considered for experiments. Finite element analysis by suing ABAQUA software is approxi- mately made for blanking of circular specimen with a flat stripper plate and then compared with experimental measurements. The the theoretical prediction of camber height which represents deflection of a dish-shaped specimen after blanking seems to give a qualitatively good agreement. It is shown through experiments the the camber height decreases with decreasing stripping force and also with increasing counter punching force, but particularly depending on the latter much more than the former.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.22-30
• /
• 2016

It is very important to obtain the net shape of the product to maximize the shear cutting surface of fine blanking. In this paper, the fine blanking die was manufactured to achieve part characteristics, such as flatness and a fully sheared surface. The V-ring in the fine blanking die was designed to prevent lateral movement of the material. The fine blanking experiment was conducted with the fine blanking die. The material usage rate was increased by over 5.7% and that of the water-soluble lubricant was decreased by over 33% when the 2-cavity die technology was applied to fine blanking. The capacity of the existing press could lead to productivity improvement and cost reduction. Thus, 2-cavity die technology for fine blanking with a minute module of an accurate gear for producing seat recliner parts was developed.