• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.173-182
• /
• 1997

This study is a basic research in purse seine fishery : on the behaviour of fish schools of tilapia Tilapia mossambica in the process of catch of the purse seine fishing method. The experiment was carried out for the mackerel purse seine which using of power block by fishing fleet system in the near sea of Cheju Island and as a forecast in the near future on the purse seine fishing, using of triplex net winch by one boat system in the near sea of Norway. These model purse seines were made of the scale of 1/180 of its full scale. The model purse seine test on the escaping behaviour of fish school by gap, area reducing of gap and tension of purse line was carried out in the stagnant water of experimental water tank. Designing and testing for the model purse seines were based on the Tauti's law. The results obtained were as follows : 1. When the time for the completing of pursing was 20 minutes, average swimming speed of fish school through a gap was 9.71cm/sec for powerblock seine and 9.97cm/sec for triplex seine. 2. In the case of pursing time in actual value was 20minutes, at 50 percent of the pursing, swimming behaviour of fish school in purse seine was 10% to I section, 80% to II section, 10% to III sectional direction for powerblock seine and a similar tendency for triplex seine. 3. In the case of pursing time in actual value was 20 minutes, at the time of 10 minutes have proceeded since then, area reducing rate of gap of the seine in projected front view was 63.5% for powerblock seine and 67.5% for triplex seine. 4. In the case of pursing time in actual value was 20 minutes, escaping rate of fish school by gap in projected front view was 70% for powerblock seine and 30% for triplex seine. Maximum tension of purse line was about 8.1 tons for powerblock seine and about 8.3 tons for triplex seine.

• Journal of KIISE:Databases
• /
• v.35 no.1
• /
• pp.67-83
• /
• 2008

In order to realize ubiquitous computing, it is essential to efficiently use the resources and the computing power of mobile devices. Among others, memory efficiency, energy efficiency, and processing efficiency are required in executing the softwares embedded in mobile devices. In this paper, query processing over XML data in a mobile device where resources are limited is addressed. In a device with limited amount of memory, the techniques of XML. stream query processing need to be employed to process queries over a large volume of XML data Recently, a technique Galled XFrag was proposed whereby XML data is fragmented with the hole-filler model and streamed in fragments for processing. With XFrag, query processing is possible in the mobile device with limited memory without reconstructing the XML data out of its fragment stream. With the hole-filler model, however, memory efficiency is not high because the additional information on holes and fillers needs to be stored. In this paper, we propose a new technique called XFLab whereby XML data is fragmented with the XML labeling scheme which is for representing the structural relationship in XML data, and streamed in fragments for processing. Through implementation and experiments, XML showed that our XFLab outperformed XFrag both in memory usage and processing time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.7-14
• /
• 2009

In this paper, the effects of annealing conditions on the structural ((002) intensity, FWHM, d-spacing, grain size, (002) peak position), optical (UV peak, UV peak position) and electrical properties (carrier concentrations, resistivity, mobility) of ZnO films were investigated. ZnO films were deposited onto SiO$_2$/si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500\sim650^{\circ}C$ in the O$_2$ flow for 5$\sim$20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterize by SEM and XRD, respectively. The optical properties were evaluated by photoluminescence (PL) measurement at room temperature (RT) using a He-Cd 325 nm laser. As the annealing temperature and time vary, the following relations were also observed: (1) proportional relationships among UV intensity (002) intensity, and grain size exist, (2) UV intensity is inversely proportional to FWHM, (3) there is no special relationship between UV intensity and electron carrier concentrations, (4) d-spacing is inversely proportional to (002) peak position, (5) UV peak position in the range of 3.20$\sim$3.24 eV means that ZnO films have a n-type conductivity which was consistent with that obtained from the electrical property, (6) the optimal conditions for the best optical and structural characteristics were found to be oxygen fraction, (O$_2$/(O$_2$+Ar)) of 0.2, RF power of 240W, substrate temperature of RT, annealing condition of 600$^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr.

• Journal of Life Science
• /
• v.17 no.8 s.88
• /
• pp.1075-1081
• /
• 2007

We investigated whether 1) capsaicin ingestion (100 mg) enhances autonomic nervous system (ANS) activities associated with thermogenic sympathetic activity as energy metabolic modulator, 2) UCP1 and ${\beta}_{3}$-AR variants of each subjects influence with ANS activity. Eight healthy males (24.7 ${\pm}$ 1.8 yr) volunteered for this study. The cardiac autonomic nervous activities evaluated by means of heart rate variability of power spectral analysis and energy metabolism were continuously measured during 5-min rest for total 90-min resting condition with placebo or capsaicin oral administration chosen at random. The results indicated that there were no significant differences in heart rate during rest between both trials. Autonomic nervous activity increased in capsaicin tablet trial, but the difference did not reach the statistical significance. Capsaicin, however, induced significantly lower respiratory gas exchange ratio at Test3 (CAP: 0.80 ${\pm}$ 0.02 vs. 0.85 ${\pm}$ 0.02), means ${\pm}$ SE, p<0.05). In conclusion, it may be suggested the capsaicin consumption as a valuable supplement for the treatment of individual with hyperlipidemia and/or obesity by improving lipolysis. Further studies will also be considered genetic variants such as UCP1 and/or ${\beta}_{3}$-AR associated with obesity.

• Journal of Hospice and Palliative Care
• /
• v.19 no.3
• /
• pp.240-248
• /
• 2016

Purpose: Patients and their caretakers need to understand various problems and requirements in the dying process so that they may prepare for death for the rest of their remaining life. Accordingly, a systematic audio-visual resource was developed to educate hospice patients and their families at the palliative care ward about the process of dying. Methods: For the development of an audio-visual resource, a initial education material was produced in the form of simple and accessible Power Point handouts based on literature study. Then, the program was completed through five rounds of a process, including expert advice, revision, update and evaluation. Results: The final version of the program was filmed with cooperation of the medical literature information division. Using the program, patients and families were educated through five phases over three sessions for a total 26 minutes and 34 seconds. Conclusion: The significance of this study lies in the fact that it was conducted after the establishment of the palliative care ward, which made it easier for nurses provide the education. It is expected that the program may be used by hospice specialists as well as nurses as an education resource for hospice patients and their families.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.859-866
• /
• 2020

This paper proposes a 2-ch DC-DC converter with a wide-input voltage range from 2.9V~5.6V for wearable AMOLED displays. For positive voltage V_POS, a boost converter is designed using an over-charged voltage permissible circuit (OPC) which generates a normal output voltage even if over-input voltage is applied, and a SPWM-PWM dual mode with 3-segmented power transistors to improve efficiency at light load. For negative voltage V_NEG, a 0.5x regulated inverting charge pump is designed to increase power efficiency. The proposed DC-DC converter was designed using a 0.18-㎛ BCDMOS process. Simulation results show that the proposed DC-DC converter generates V_POS voltages of 4.6 V and V_NEG voltage of -0.6V~-2.3V for input voltage of 2.9V to 5.6V. In addition, it has power efficiency of 49%~92%, output ripple voltage has less than 20 mV for load current range of 1 mA~70 mA.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.158-158
• /
• 2016

최근 화석연료의 고갈과 환경 보전 및 에너지 절약에 대한 관심이 높아짐에 따라 화석연료의 소비를 최소화하고 실내조건을 쾌적하게 유지하려는 연구가 진행되고 있다. 국내의 경우 전체 에너지 소비의 30%이상을 차지하고 있는 건물부문에서의 에너지 소비를 줄이기 위한 활발한 연구가 진행되고 있으며 이에 따른 에너지절약 소재개발이 활발하게 진행되고 있다. 1975년 이후 여러 차례에 걸친 단열강화 조치를 통해 건물에서의 에너지 소모를 줄이고 있었으나 건물의 외벽에 대한 사항으로 한정되어있었고, 또한 건물의 창 면적이 증가함에 따라 창을 통한 열손실량과 열획득량이 더욱 증가하게 되었다. 이러한 문제를 해결하기 위해 열반사유리에 대한 많은 연구가 진행되고 있다. 열반사유리는 근적외선(열선)영역의 빛을 반사시켜 실내의 열손실량 및 외부에서의 열획득량을 감소시켜 에너지의 소비를 줄일 수 있는 유리을 말한다. 이러한 열반사유리은 fresnel 방정식을 통해 빛의 파장대에 따른 반사율 및 투과도를 예측할 수 있는데, 다층박막구조인 Oxide-Metal-Oxide(OMO)구조는 Oxide의 높은 굴절률과 Metal의 낮은 굴절률을 통해 가시광영역대의 높은 투과도와 근적외선 영역의 높은 반사율을 얻을 수 있다. 또한 Metal층을 삽입함으로서 flexible한 코팅이 가능하고, 높은 carrier density와 mobility로 표면 플라즈몬 공명을 통해 특정 파장대의 반사율을 높일 수 있으므로 많은 연구가 진행되고 있다. $TiO_2$는 고굴절률 및 낮은 광흡수성의 특성을 가지는 산화물반도체로 기존의 $In_2O_3$계 산화물에 비해 값이 싸고 높은 안정성과 광촉매특성을 보이므로 외부에 노출된 환경에 적합한 재료이다. Ag는 저굴절률과 낮은 광흡수성을 가지는 재료로 금속층에 적합하다. 본 연구에서는 fresnel 방정식을 통해 반사도 및 투과도를 예측하고 마그네트론 스퍼터링법으로 다층박막을 열선인 적외선 영역에서의 반사율 및 반사 효율을 평가하였다. Index-matching 시뮬레이션을 통해 $TiO_2/Ag/TiO_2$ 다층박막의 투과도와 반사도를 이론적으로 검토하였다. 시뮬레이션 프로그램은 Macleod프로그램을 이용하였고 재료 각각의 굴절률은 Ellipsometry를 이용하여 측정하였다. 두께 40 nm 와 8 ~ 16 nm를 가지는 $TiO_2$층과 Ag층을 각각 RF/DC 마그네트론 스퍼터링법을 이용하여 Glass기판 위에 증착하였다. 직경 3 in 의 $TiO_2$, Ag 소결체 타깃을 이용하였고 스퍼터링 파워는 각각 200 W, 50 W로 설정하였고, 스퍼터링 가스는 Ar가스의 유량을 20 sccm으로 설정하였다. 작업압력은 모두 1 Pa로 설정하였고 타깃 표면의 불순물 및 이물질 제거를 위해 Pre-sputtering을 10분 진행하였다. 박막의 두께는 reflectometer와 Alphastep을 이용하여 측정하였고 Hall effect measurement를 이용하여 비저항, carrier density, mobility등 전기적 특성을 측정하였다. 또한 UV-VIS spectrometer와 USPM-RU-W NIR Micro-Spectrophotometer를 통해 광학적 특성을 측정하였고 계산 값과 비교분석하였다. 또한 열반사 특성을 평가하기 위해 직접 set-up한 장비를 이용하였다. 단열 박스에 샘플을 장착해 적외선 램프를 조사하였을 때의 열 반사효율을 평가하였고, IR Camera를 이용하여 단열 박스 내부의 온도 변화를 관찰하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.123-129
• /
• 2017

This paper proposes a new nonnegative matrix factorization (NMF) based direction-of-arrival (DOA) estimation method for multiple sound sources using a dual microphone array. First of all, sound signals coming from the dual microphone array are segmented into consecutive analysis frames, and a steered-response power phase transform (SRP-PHAT) beamformer is applied to each frame so that stereo signals of each frame are represented in a time-direction domain. The time-direction outputs of SRP-PHAT are stored for a pre-defined number of frames, which is referred to as a time-direction block. Next, In order to estimate DOAs robust to noise, each time-direction block is normalized along the time by using a block subtraction technique. After that, an unsupervised NMF method is applied to the normalized time-direction block in order to cluster the directions of each sound source in a multiple sound source environments. In particular, the activation and basis matrices are used to estimate the number of sound sources and their DOAs, respectively. The DOA estimation performance of the proposed method is evaluated by measuring a mean absolute error (MAE) and the standard deviation of errors between the oracle and estimated DOAs under a three source condition, where the sources are located in [$-35{\circ}$, 5m], [$12{\circ}$, 4m], and [$38{\circ}$, 4.m] from the dual microphone array. It is shown from the experiment that the proposed method could relatively reduce MAE by 56.83%, compared to a conventional SRP-PHAT based DOA estimation method.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.581-587
• /
• 2004

Conventional power spectrum methods based on FFT, AR method are not appropriate for analyzing biomedical signals whose spectral characteristics change rapidly. On the other hand, time-frequency analysis has more desirable characteristics of a time-varying spectrum. In this study, we investigated the spectral components of heart rate variability(HRV) in time-frequency domain using time frequency analysis methods. In the various time-frequency kernels functions, we studied the suitable kernels for the analysis of HRV using synthetic HRV signals. First, we evaluated the time/frequency resolution and cross term reduction of various kernel functions. Then, from the instantaneous frequency, obtained from time-frequency distribution, the method extracting frequency components of HRV was proposed. Subjects were 17 healthy young men. A coin-stacking task was used to induce mental stress. For each subjects, the experiment time was 3 minutes. Electrocardiogram, measured during the experiment, was analyzed after converted to HRV signal. In the results, emotional stress of subjects produced an increase in sympathetic activity. Sympathetic activation was responsible for the significant increase in the LF/HF ratio. Subjects were divided into two groups with task ability. Subjects who have higher mental stress have lack of task ability.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.348-355
• /
• 2000

This paper described the relationship between the behavior of the Israeli carp, Cyprinus carpio and the environmental noise level due to the dynamite explosion work. The experiment was conducted in the cage ($L10{\times}W4{\times}D4 m$) of aquaculture located at Chungjoo Lake, Chechon, in 1997. The fish trajectory was obtained by the telemetry system in which a pulsed ultrasonic pinger ($50 kHz, {\phi}16{\times}L70 mm$) attached to the fish was tracked three dimensionally, and the underwater noise levels were measured. The results of the study were as follows: 1. The underwater noise levels in the normal blasting measured at a distance of 400 m from the source of noise increased by $40 dB (re 1 {\mu}Pa)$ compared to the levels before explosion. The dominant frequency and the increased power spectrum level of the underwater noise by the explosion work were $75 to 100 Hz and 22.9 to 35.3 dB$, respectively. 2. The underwater noise levels in the test blasting measured at a distance of 350 m from the source of noise increased by average $49.5 dB (re 1 {\mu}Pa)$compared to the levels before explosion. 3. The swimming area of the fish was reduced with the time after explosion, and after more than one hour the fish represented the similar swimming area and behavior to the status of right before explosion. 4, The swimming depth layer of the fish was most of the case at the sea surface less than 1,0 m except during explosion or right after of it. But the fish swam downward when an external stimulus like the explosion noise was given to the fish. 5. The average swimming speeds of the fish before, during and after the works were about 1.2 times, 1.9 times and 1.0 times of the body length, respectively, and the speed of the fish with explosion was faster 1.6 times than the speed without of that. Consequently, the explosion noise levels measured by this study were sufficiently high to affect the fish, and the heavy shock by the explosion works could produce a considerable unfavorable effects to the fish.