• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.543-549
• /
• 2006

The bursting properties under various conditions were investigated to ascertain the optimum conditions to yield the best properties. Fiber aspect ratio (AR: length of fiber/diameter of fiber), interphase condition and fiber content were considered as variables which impact the bursting pressure, bulge constant, torsional rigidity ratio. The bursting pressure of reinforced rubber increases up to 8.73 times compared to the virgin material. The better interphase condition shows the higher bursting pressure at given AR and fiber content. The bulge constant and torsional rigidity highly decrease with increasing AR and better interphase condition at same fiber content. The bulge constant and torsional rigidity reveal the minimum of 11% and 0.6% of the matrix, respectively. The bursted shape after test shows the different patterns between unfilled and reinforced rubbers. The case of virgin rubber shows a radiating shape while that of reinforced rubber shows a fluctuating straight line. Overall, it was found that the fiber AR and interphase condition have an important effect on bursting properties.

• The Korean Journal of Rheology
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1990

배추의 조직감 특성을 기계적으로 측정하는 방법을 수립하기 위하여 여러 가지 형 태의 탐침에 의한 침투 및 절단시험에서 나타난는 힘-거리 곡선을 비교분석하였으며 그 결 과를 배추잎의 미세구조와 관능적특성과 연관하여 해석하였다. 배추잎의 침투심험에서 탐침 의 선단각, 선단면적 및 둘레에 따라 힘-거리 곡선의 형태는 크게 달라지며 선단면적과 둘 레가 커질수록 파열력이 크게 증대되었다. 절단시험에서는 표피와 내부유관속 조직을 절단 하는 세 개의 특징적인 피크를-나타내었다. 배추잎의 염장에 의하여 침투시험의 최대 변형 력은 크게 감소된 반면 파열력은 크게 증대되어 최대 변형력에 대한 파열력의 비(a/c) 는 증가되었으며 이것은 탐침의 선단면적과 둘레가 큰경우에 더욱 두드러지게 나타났다. 염장 에 의하여 탄성한계까지의 변형거리가 커졌으며 최초 변형에서의 탄성치(a/l)는 감소하는 경 향을 나타내었다. 절단시험에서는 염장에의하여 외피의 절단력이 상대적으로 증가하였다. 배 추 및 절인배추의 아삭아삭한 정도는 침투시험의 최대변형력과 a/l의 변화와 밀접한 관계가 있으며 질긴 정도는 침투시험의 파열력과 a/c 절단시험의 절단력과 관계가 있으며 아작아작 한 정도는 침투시험의 a/c와 관계가 있는 것으로 판단되었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.319-322
• /
• 2000

솔레노이드 코일을 이용하여 전자기식 충격파 발생기를 제작하고 발생된 충격파의 음향학적인 특성을 측정하였다. 충격파의 생물학적 효과에 가장 중요한 과정으로 알려진 초점 부위의 기포군의 파열 현상을 바늘형 하이드로폰을 이용하여 평가하였다. 하이드로폰 신호의 웨이브렛 변환을 이용하여 초점 부근에서 기포 파열 지연 시간을 정확히 측정할 수 있음을 보였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2001.11a
• /
• pp.301-310
• /
• 2001

본 연구는 내화성능을 가진 수막보호유리벽을 실제 건축물에 적용하는데 있어서 필수적으로 고려해야 할 가상시나리오 중에서 수막이 유리면을 보호하기 이전에 유리면에 근접되어 있는 화염으로부터 방출되는 복사열이 유리면이 가열된 상태에서 수막이 형성될 경우 유리면의 온도가 급속히 냉각됨으로서 발생할 수 있는 급냉파열특성을 규명하기 위해 실험한 연구로서 가열면온도범위에 따라 유리면에$150^{\circ}C$이상 $250^{\circ}C$이하에서 수막이 형성될 경우 급냉파열은 일어나지 않았으나 일반유리는 $100^{\circ}C$이상 $150^{\circ}C$이하에서 급냉파열이 일어남을 확인하였다. 즉 방화구획벽에 적용가능한 수막형성유리벽의 유리가 강화유리인점을 착안하면 수막의 도포이전에 강화유리면의 온도가 $250^{\circ}C$까지 올라가기 전에는 수막을 유리면에 접촉하여도 유리면의 급냉파열이 일어나짐 않음을 확인할 수 있었다. 이점은 일정한 구획내에서 유리면의 직근에 설치된 감지기에 의해 수막형성시스템의 가동을 할 경우 급내파열형상이 발생하지 않는 온도범위를 설정할 때 중요한 데이터로 활용가능하다. 결과적으로 국부복사열에 의하여 온도범위를 설정할 때 중요한 데이터로 활용가능하다. 결과적으로 국부복사열에 의하여 유리면의 온도가 급냉파열현상을 일으키는 한계온도에 이르기 전에 유리벽체 상부의감지기의 작동이 필수적으로 일어날 수 있음을 증명한다면 수막을 이용한 유리벽체를 일정시간이상의 내화성능이 요구되는 방화구획의 수직부재로 활용하는데 있어서 걸림돌이 되는 급냉파열에 대한 우려를 종식시키는데 이바지할 수 있다.l류 11.56%, acid류 38.87%, hydrocarbon류 2.89%, ester류 0.80%, 총 70.32%가 확인되었다. Alcohol류에서 linalool가 3.78%, acid류에서는 caproic acid류가 14.40%, carbonyl류에서 2-hydroxy-4-methoxyacetophenone이 2.99%, hydrocabon류에서는 aromadendrene가1.59% 그리고 ester류에서는 methyl palmitate가 0.43%으로 가장 많이 함유하고 있었다.0ppm에서 약 25.6%흡수되었고 ferric citrate 100ppm은 24.7%, ferrous sulfate는 19.7%흡수되었다. ILC를 첨가하지 않은 100ppm 철분염 용액은 ferrous sulfate를 제외하고는 흡수도가 감소되었다. 철분 결핍된 쥐에게 gavage 방법에 의하여 철분강화우유를 투여하였을 때 철분 25ppm 시료에서는 ferrous sulfate가 12.5%로 가장 높았고 ferrous lactate는 8.1%, ferric citrate는 6.5% 흡수되었다. 철분 100ppm수준에서는 흡수율이 낮아져 ferrous sulfate는 25ppm 시료보다 절반이하 수준이었다. Ferric citrate는 차이가 거의 없었으며 ferrous lactate는 70%수준이었다. 이상의 결과에서 철분강화우유에 사용하기 적합한 철분염은 ferrous lactate, ferric citrate였는데 특히 ferrous lactate는 제품의 이화학적 품질, 생이용성 측면 모두에서 가장 좋은 것으로 나타났다.다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.219-222
• /
• 2009

Pyrostarters play a role as a turbopump starter in liquid propellant propulsion systems by supplying pressurized gas to power turbines for engine start. A rupture disk in pyrostarters, which is usually installed behind a nozzle throat, not only isolates the charged solid propellants from the external environment but also improves the ignitability of the solid propellants by increasing a chamber pressure at the beginning of combustion. Experimental tests have been performed to study the effects of rupture disk thickness, depth and shape of scores, and pressure build-up rates on burst pressures and burst diameters. The experimental results show that the developed rupture disk fulfills the performance requirements expected in a real operational condition.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.72-77
• /
• 2010

A hydraulic test on a filament wound case of Kick-Motor was conducted to evaluate the structural stiffness degradation and to confirm the burst performance. Failure criteria have been defined with bursting above 150% of MEOP(Maximum Expected Operation Pressure) and failure in the cylinder. The analysis result showed that filament fiber in the cylinder should be broken at about 2088psig. From a hydraulic test it has been verified that composite case meets the failure requirements, and that the stiffness does not decrease even after a year since the manufacturing.

• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.158-164
• /
• 2011

As the instruments as well as techniques for hip arthroscopy have developed, the interests and understandings of acetabular labral tear have also increased. As a consequence, the diagnosis itself was increased. However, it is still difficult to be diagnosed accurately in an ordinary clinic. In this brief review, the clinical and radiological characteristics and diagnostic implications of acetabular labral lesions were described to help the surgeon to make a right decision.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.179-186
• /
• 2020

In this study, the wall stress and rupture risk for abdominal aortic aneurysms were calculated based on the age and geometry of the examined abdominal aortic aneurysms. The geometry of the abdominal aorta was simulated using computed tomography data from patients with abdominal aortic aneurysms. With regard to material properties, the Gasser-Ogden-Holzapfel model was applied to the analysis to simulate the anisotropic hyperelastic characteristics of the artery. In addition, each material parameter was estimated to consider the properties for age and for normal and aneurysm tissue. Moreover, the correlation between the diameter and angle of the aortic aneurysms was analyzed based on data from patients with abdominal aortic aneurysms, and series simulations were conducted. As a result, the rupture risk for the abdominal aortic aneurysms was evaluated based on the age and geometry of the aneurysm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1349-1360
• /
• 2013

The post-tensioned anchorage zones of normal concrete have larger cross sections because of congested reinforcements to resist high bearing and bursting stresses. The high compressive and tensile strength of newly developed UHPC (Ultra High Performance Concrete) may reduce the cross sectional dimensions and simplify the reinforcement details, if used for post-tensioned members. The Finite Element Analysis was performed to evaluate the mechanical behavior of post-tensioned anchorage zones using UHPC without anchorage plates and confining reinforcements. The results show that the maximum bursting stresses are less than the values given in current design code without failure due to vertical cracks. The location of maximum bursting stresses were at 0.2 times of width of the models. The bursting force from FEA is less than that is obtained using simplified formular in Korean Bridge Design Code.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.285-295
• /
• 2010

The frequency in which noise energy is generated, that is, the point where the preceding vowel ends is the cut-off frequency. Thereupon, this study intends to examine the correlations between, cut-off frequencies, cut-off frequencies changed by the following vowel, and cut-off frequencies and nasalance score, of fricatives and affricates with the subjects of children with the cleft palate and normal children. The subjects of this study are total 12 children residing in Seoul and Gyeonggi area. Six are the children diagnosed to have the cleft palate and whose chronological age are more than six, and another six are the normal children who are also more than six and whose chronological age and sex correspond to those of the former. Each subject was presented with nonsyllable environment and sentence environment(50 environment) of fricatives and affricates. Regarding meaningless syllable environment and sentence environment of fricatives and affricates, children with the cleft palate had lower cut-off frequencies than normal children. As a result of comparative study on correlations between cut-off frequencies and nasalance score of children with the cleft palate and normal children, it doesn't show statistically significant correlations in both meaningless syllable environment and sentence environment of normal children, but it has statistically significant correlations in sentence environment of children with the cleft palate.