• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.484-489
• /
• 2004

경사식 방파제에 대하여 수리모형실험을 통하여 방파제의 전사면과 저면에 작용하는 파압을 직접 측정하여 파압의 공간적 분포를 파악하여 보았다. 실험의 길과는 기존의 경사식 방파제에 대하여 파압에 대한 연구는 거의 없기 때문에 Goda(1989, 2002)가 제시한 전사면에 대한 이론식과 비교하여 보았다. 실험은 특정적으로 제시된 방파제 단면에 대한 실험이 아니고, 가상적인 단면을 선정한 후 파랑 및 수심 등의 제조건을 감안하여 파형경사를 산정하고, 이애 맞는 파고와 주기를 산정한 후 제반 해안수리학적 특성중 반사율과 처오름 높이, 사면 및 저면에 작용하는 파압을 직접 측정하여 보았다. 실험결과 전사면에서의 파압 분포는 Goda의 이론식과 경향은 비슷하나 크기는 차이가 나이에 대한 보정은 필요한 것으로 나타났으며, 저면에서의 파압도 측정이 되었지만 이것이 지반지지력에 어떠한 영향을 미치는지는 좀 더 많은 연구가 필요할 것으로 판단되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.573-584
• /
• 2013

This study experimentally investigated the change in distribution of wave pressure on the front wall according to the variation of the front wall porosity of the caisson breakwater having the cap of wave chamber. First, the wave pressure for the non-porous caissson corresponding to zero porosity was measured and compared with the pressure formula suggested by Goda(1974). The analysis showed that the measured pressure distribution fairly well agreed with the Goda formula, which confirmed the accurate measurement of wave pressure in the present experiment. In case of the porous caisson, meanwhile, the experiment was performed by varying the front wall porosity as 0.2, 0.25, and 0.3. The wave pressure distribution at the front wall showed little difference according to the porosity for most of the test wave conditions, whereas the pressure slightly increased with the porosity for some test waves whose wave heights and periods were relatively large. However, the difference according to the porsosity was insignificant for the wave force at the front wall.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.130-134
• /
• 1992

본 연구의 목표는 혼성방파제의 무공 및 유공 케이슨에 작용하는 파압분포에 대한 기존의 연구결과를 조사, 분석, 정리하고 실제로 이들에 대한 수리모형실험을 실시하여 관측된 결과를 기존의 연구결과(곡본승리 등 1982, 고교중웅 등 1983, Goda 1985, Takahashi 1991)와 비교, 분석함으로써 케이슨에 작용하는 파압은 물론 기타 수리현상의 특성을 파악하는 데 있다.(중략)

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1067-1076
• /
• 2014

In this study, a series of hydraulic experiments are conducted to measure wave pressure on vertical structures with incident solitary waves that well represent characteristics of tsunamis. The pressure transducers measure time histories of wave pressure according to wave height to see pressure distribution. The force of incident solitary wave is estimated from integrated pressure distributions and represented with square and cylindrical columns. Experimental measurements are compared with the predictions of existing empirical formulas frequently used to design of coastal structures.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.85-96
• /
• 2011

A breakwater is a important structure for both calmness of harbor and protection of the port facilities from waves generated from typhoons or wind. This study adopted the rubble mound breakwater, which is one of the most popular type of breakwaters in Korea. Rubble mound breakwater had been designed by considering only static condition previously. Recently, a dynamic wave-load due to waves has been also considered in designing breakwater. In design, the wave-load is assumed as an uniform load which only acts in the front slope of the breakwater. However, the assumption is not applicable in reality. In this study, therefore, a real-time wave-load acting on the breakwater instead of the uniform load is considered, and it is assumed to be acting on the seabed too. Based on the numerical analysis, it is found that there is a significant difference in the maximum settlement compared with the result predicted by the existing design method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.286-304
• /
• 2017

In this study, we proposed a new-type of circular perforated caisson breakwater consisting of a bundle of latticed blocks that can be applied to a small port such as a fishing port, and numerically investigated the hydraulic characteristics of the breakwater. The numerical method used in this study is OLAFOAM which newly added wave generation module, porous media analysis module and reflected wave control module based on OpenFOAM that is open source CFD software published under the GPL license. To investigate the applicability of OLAFOAM, the variations of wave pressure acting on the three-dimensional slit caisson were compared to the previous experimental results under the regular wave conditions, and then the performance for irregular waves was examined from the reproducibility of the target irregular waves and frequency spectrum analysis. As a result, a series of numerical simulations for the new-type of circular perforated caisson breakwaters, which is similar to slit caisson breakwater, was carried out under the irregular wave actions. The hydraulic characteristics of the breakwater such as wave overtopping, reflection, and wave pressure distribution were carefully investigated respect to the significant wave height and period, the wave chamber width, and the interconnectivity between them. The numerical results revealed that the wave pressure acting on the new-type of circular perforated caisson breakwaters was considerably smaller than the result of the impermeable vertical wall computed by the Goda equation. Also, the reflection of the new-type caisson breakwater was similar to the variation range of the reflection coefficient of the existing slit caisson breakwater.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2006.09a
• /
• pp.161-164
• /
• 2006

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.601-608
• /
• 2011

In order to design floating structures, it should be required to evaluate hydrodynamic motions and structural behavior under the wave loadings. Then, structural behavior of floating structures should be evaluated including the effects of wave-induced hydraulic pressure subjected to floating structures. However, there has been a problem to exactly evaluate structural behavior of floating structures since it was difficult to directly connect wave-induced hydraulic pressure resulting from hydrodynamic analysis with structural analysis model. In this study, in order to exactly evaluate structural behavior of floating structures under the wave loading, integrated analysis of hydrodynamic motion and structural behavior was carried out to the large-scaled floating structure. The wave-induced hydraulic pressure resulting from hydrodynamic analysis AQWA were directly mapped to structural analysis model ANSYS bia Workbench interface of ANSYS Inc.. As the results of this study, it was found that the integrated analysis of this study evaluate exactly structural behavior of floating structures under the wave loadings since this method can directly reflect wave-induced hydraulic pressure resulting from hydrodynamic analysis to structural analysis model. Also, as the results of structural behavior evaluation, it was found that the tensile stress on the top slab was maximized at the wave direction of $0^{\circ}$, and tensile stress on the bottom slab was maximized at the wave direction of $45^{\circ}$, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.363-368
• /
• 2017

The tsunami flood the coastal cities and damage the land structures. The study on wave pressure and force on land structures is one of the important factors in designing the stability of inland structures. In this study, two - dimensional wave flume tests on the horizontal wave force and pressure of tsunamis on a simplified box-type structure was conducted. Vertical distribution and wave power of horizontal wave pressure over time were measured by pressure sensors and force transducer. Also, those were measured from the different wave breaking types. The vertical distribution of horizontal wave pressure was uniform at the moment when the horizontal wave force to the structure was maximum under the breaking wave condition. A surf similarity parameter was employed in order to figure out the relationship between the maximum horizontal wave force on the structure as a function of various incident wave conditions. As a result, the non - dimensionalized horizontal wave force tends to decrease exponentially as the surf similarity parameter increases.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.180-201
• /
• 2020

It has been widely known that the effect of diffracted waves at the tip of composite breakwater with finite length causes the change of standing wave height along the length of breakwater, the spatial change of wave pressure on caisson, and the occurrence of meandering damage on the different sliding distance in sequence. It is hard to deal with the spatial change of wave force on trunk of breakwater through the two-dimensional experiment and/or numerical analysis. In this study, two and three-dimensional numerical techniques with olaFlow model are used to approach the spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, it is thoroughly studied the mean wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis. In conclusion, it is confirmed that the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure checked by not two-dimensional analysis, but three-dimensional analysis through the change of wave pressure applied to the caisson along the length of breakwater.