• Title/Summary/Keyword: 파수유한요소/경계요소법

Search Result 8, Processing Time 0.02 seconds

Numerical Analysis of Rail Noise Regarding Surface Impedance of Ground by Using Wavenumber Domain Finite and Boundary Elements (지면 임피던스를 고려한 레일 방사 소음의 파수영역 유한요소/경계요소 해석)

  • Ryue, Jungsoo;Jang, Seungho
    • Journal of the Korean Society for Railway
    • /
    • v.18 no.4
    • /
    • pp.289-300
    • /
    • 2015
  • An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In conventional approaches to predicting rail noise, the rail is regarded as placed in a free space so that the reflection from the ground is not included. However, in order to predict rail noise close to the rail, the effect of the ground should be contained in the analysis. In this study the rail noise reflected from the ground is investigated using the wavenumber domain finite element and boundary element methods. First, two rail models, one using rail attached to the rigid ground and one using rail located above rigid ground, are considered and examined to determine the rigid ground effect in terms of the radiation efficiency. From this analysis, it was found that the two models give considerably different results, so that the distance between the rail and the ground is an important factor. Second, an impedance condition was set for the ground and the effect of the ground impedance on the rail noise was evaluated for the two rail models.

Prediction of Radiated Sound Field by Using Boundary Element Method Based on the Pressure Measurements (음장측정치를 사용한 경계요소법에 의한 진동체 방사음장 예측)

  • 김봉기;김진연;이정권
    • The Journal of the Acoustical Society of Korea
    • /
    • v.12 no.2
    • /
    • pp.28-36
    • /
    • 1993
  • 임의의 형상을 갖는 진동체에 의한 방사 음장해석은 경계요소법에 의하여 이미 많은 해석이 시도되었다. 그러나, 진동체의 형상이 매우 복잡한 경우에는 겉표면의 요소수가 크게 증가할 뿐만 아니라 각 요소에서의 경계조건을 모두 알아내어야 하므로, 저주파에 국한된 해석일지라도 엄청난 시간과 노력이 필요하게 된다. 이러한 어려움을 극복하기 위하여 경계요소법을 사용하되, 복잡한 형상의 진동체를 둘러싸는 가상적인 표면을 매우 간단하게 설정한 후 그 표면상의 경계조건인 음압을 측정한다. 임의의 형상에 대한 파수 영역에서의 감쇠파의여파작업을 위하여 특이값 분리를 사용하였다. 특이값 분리에 의하여 음압분포를 측정위치에서 설정된 일반 좌표계에서의 고유모드로 분해한다. 각 고유모드의 원거리 음장의 기여도에 해당하는 각 특이벡터에 대한 특이값의 크기를 비교하여, 유한개의 고유모드만을 포함시킴으로써 원거리 음장을 예측한다. 몇 개의 예제를 통하여 해석적 방법의 기존의 경계요소법에 의한 결과를 본 연구 방법의 결과와 비교하여 잘 일치함을 확인하였다.

  • PDF

Vibration of Pipes Coupled with Internal and External Fluids (내부 및 외부 유체와 연성된 파이프의 진동 해석)

  • Ryue, Jung-Soo
    • The Journal of the Acoustical Society of Korea
    • /
    • v.31 no.3
    • /
    • pp.142-150
    • /
    • 2012
  • The waveguide finite element (WFE) method is a useful numerical technique to investigate wave propagation along waveguide structures which have uniform cross-sections along the length direction ('x' direction). In the present paper, the vibration and radiated noise of the submerged pipe with fluid is investigated numerically by coupling waveguide finite elements and wavenumber boundary elements. The pipe and internal fluid are modelled with waveguide finite elements and the external fluid with wavenumber boundary elements which are fully coupled. In order to examine this model, the point mobility, dispersion curves and radiated power are calculated and compared for several different coupling conditions between the pipe and internal/external fluids.

Prediction of acoustic radiation efficiency for trapezoidal corrugated plates (사다리꼴 주름평판의 음향방사효율 해석)

  • Jungsoo Ryue;Seungho Jang
    • The Journal of the Acoustical Society of Korea
    • /
    • v.42 no.2
    • /
    • pp.83-93
    • /
    • 2023
  • Trapezoidal corrugated plates are often treated as orthotropic plates to simplify the modelling of the corrugation. However, this simplification is not valid at high frequencies in which the localized vibration within the parts of corrugation takes place. In this study, the vibrational and acoustical characteristics of corrugated plates are investigated up to high frequencies by means of the wavenumber domain numerical approach. Based on the findings from this numerical analysis, an approximate method to predict vibro-acoustic characteristics of corrugated plates is proposed. This approximate model consists of four equivalent plates which can represent global and local behaviours of corrugated plates. The radiation efficiency of corrugated plates is predicted from the approximate model and validated through the comparison with those of the numerical method.

Combining CFD/FEM/BEM/SEA to Predict Interior Vehicle Wind Noise - Validation Case CAA German Working Group (자동차 유동기인 실내소음 예측을 위한 CFD/FEM/BEM/SEA 의 조합 및 검증 - CAA German Working Group)

  • Blanchet, D.;Golota, A.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2014.10a
    • /
    • pp.800-811
    • /
    • 2014
  • Recent developments in the prediction of the contribution of windnoise to the interior SPL have opened a realm of new possibilities in terms of i) how the convective and acoustic sources terms can be identified, ii) how the interaction between the source terms and the side glass can be described and finally iii) how the transfer path from the sources to the interior of the vehicle can be modelled. This work discusses in details these three aspects of wind noise simulation and recommends appropriate methods to deliver required results at the right time based on i) simulation and experimental data availability, ii) design stage at which a decision must be made and iii) time available to deliver these results. Several simulation methods are used to represent the physical phenomena involved such as CFD, FEM, BEM, FE/SEA Coupled and SEA. Furthermore, a 1D and 2D wavenumber transformation is used to extract key parameters such as the convective and the acoustic component of the turbulent flow from CFD and/or experimental data whenever available. This work focuses on the validation of the wind noise source characterization method and the vibro-acoustic models on which the wind noise sources are applied.

  • PDF

Combining CFD/FEM/BEM/SEA to Predict Interior Vehicle Wind Noise - Validation Case Hyundai BMT4 (자동차 유동기인 실내소음 예측을 위한 CFD/FEM/BEM/SEA 의 조합 및 검증 - 현대자동차 BMT4)

  • Blanchet, D.;Golota, A.;Almenar, R.;Lim, J.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2014.10a
    • /
    • pp.563-564
    • /
    • 2014
  • Recent developments in the prediction of the contribution of windnoise to the interior SPL have opened a realm of new possibilities in terms of i) how the convective and acoustic sources terms can be identified, ii) how the interaction between the source terms and the side glass can be described and finally iii) how the transfer path from the sources to the interior of the vehicle can be modelled. This work discusses several simulation methods that can be used to represent the physical phenomena involved such as CFD, FEM, BEM, FE/SEA Coupled and SEA. This work focuses on the validation of the wind noise source characterization method and the vibro-acoustic models on which the wind noise sources are applied in the framework of a benchmark proposed by Hyundai Motors Corporation.

  • PDF

Development of Special Purpose Computer Program for the Analysis of Car Interior Noise (자동차 차실소음 해석을 위한 전용 프로그램의 개발)

  • 박동철;강연준;이장무;김석현;김중희
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1991.04a
    • /
    • pp.57-61
    • /
    • 1991
  • 최근 차량의 고급화에 따라 차실 소음 저감에 대한 연구가 많이 수행되고 있다. 차실의 소음은 주로 엔진 또는 동력전달 장치의 진동과 도로의 요철로 생기는 차체의 진동으로부터 발생된다. 차실에서 20-200Hz의 저주파수대의 소음은 주로 차체 진동과의 연성 효과로 기인한다. 따라서 이 주파수영역에 있어서 소음의 특성을 파악하기 위해서는 차실의 음향 모우드 해석과 차체 구조물의 진동과 차실 음향 모우드의 상호관계를 고려한 구조-음향 연성 해 석이 필요하다. 차실의 음향 모우드 해석을 위해서는 실험적 방법과 유한 요 소법을 이용하는 방법이 있다. 유한 요소법을 이용하여 음향 특성을 결정하 는 경우, 큰 어려움은 없으나 밀폐된 공동에서 경계면을 이루는 구조물의 진 동에 의해 음이 발생되는 경우 단순히 공간의 음향 특성만으로는 음향 응답 을 예측할 수 없게 된다. 즉, 경계면에서 반사되는 반사파는 경계면의 탄성 변위에 의해 운동 특성이 변화되어 반사되므로 입사파와 다른 특성을 가지 게 된다. 따라서 이러한 구조 진동 특성과 음향 특성을 모두 고려한 연성 해 석을 수행하여야 하며, 음향 모우드와 구조 진동 모우드와의 연성에 의한 음 향 응답 특성을 결정하기 위한 수치 해석 프로그램을 개발하게 되었다. 본 연구에서는 전.후 처리 및 사용자 편의성을 염두에 두고 차실소음해석 전용 프로그램(ACSTAP: Acoustical and structural, coupling analysis program) 을 작성하고 이를 실차에 적용하여 유용성을 보였다.

  • PDF

Dispersion Characteristics of Cylindrical Shells Submerged in the Fluid (유체에 잠긴 원통형 실린더의 파동 분산 특성)

  • Jung, Byung-Kyoo;Hong, Chinsuk;Ryue, Jungsoo;Jeong, Weui-Bong;Shin, Ku-Kyun
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.25 no.8
    • /
    • pp.575-582
    • /
    • 2015
  • This paper deals with the dispersion relation of the waves sustained in a cylindrical shell submerged in the fluid. The waveguide finite method and the boundary element method are used to predict the dispersion characteristic of the cylindrical shell. The dispersion diagram of the cylinder is estimated from the eigenvalue problem and the forced vibration response. It follows that the water-loading leads to the decrease of the cut-on frequencies and the phase speeds of the bending waves. On the contrary, the longitudinal waves and the torsional waves are hardly affected by the fluid, and therefore the order of the cut-on frequencies of the waves is changed. The acoustic dispersion diagram is also estimated from the forced acoustic response to identify the characteristics of the wave radiated to the fluid. It follows that the acoustic waves on and near the surface of the cylinder are the same as those in the structure. But at the far field the acoustic waves caused by subsonic waves e.g., the bending waves disappear as the increase of the distance. Conclusively, the characteristics of waves in cylindrical shells are significantly affected by water-loading in terms of the cut-on frequency, the wave speed, the order of the cut-on and radiation.