• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.20-29
• /
• 2021

During multi-stage fracturing in a low permeable shale formation, stress interference occurs between the stages which is called the "stress shadow effect(SSE)". The effect may alter the fracture propagation direction and induce ununiform geometry. In this study, the stress shadow effect on the hydraulic fracture geometry and the well productivity were investigated by the commercial full-3D fracture model, GOHFER. In a homogeneous reservoir model, a multi-stage fracturing process was performed with or without the SSE. In addition, the fracturing was performed on two shale reservoirs with different geomechanical properties(Young's modulus and Poisson's ratio) to analyze the stress shadow effect. In the simulation results, the stress change caused by the fracture created in the previous stage switched the maximum/minimum horizontal stress and the lower productivity L-direction fracture was more dominating over the T-direction fracture. Since the Marcellus shale is more brittle than more dominating over the T-direction fracture. Since the Marcellus shale is more brittle than the relatively ductile Eagle Ford shale, the fracture width in the former was developed thicker, resulting in the larger fracture volume. And the Marcellus shale's Young's modulus is low, the stress effect is less significant than the Eagle Ford shale in the stage 2. The stress shadow effect strongly depends on not only the spacing between fractures but also the geomechanical properties. Therefore, the stress shadow effect needs to be taken into account for more accurate analysis of the fracture geometry and for more reliable prediction of the well productivity.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.145-152
• /
• 2010

In this study, a survey of structural geology and discontinuities were carried out on the space in a limestone mine where the construction of crushing facilities is in planning. The stability of the site was analyzed by rock mass classifications and numerical analysis. Through these analyses, it could be known that removal of pillars could make the stability problems in the mine and the supports for pillars must be considered.

• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.285-290
• /
• 2002

조사지역은 전라남도 함평군 함평읍으로부터 남쪽으로 엄다면 화양리, 학야리, 성천리 일대에 발달한 충적층으로서. 이 지역에는 남서-북동방향으로 광주단층이 통과하고 있는 것으로 추정된다. 충적층 하부에 발달한 단층을 포함한 대규모 파쇄대 파악에는 지표지질조사로서 한계가 있다. 따라서 이 연구에서는 물리탐사방법을 적용하여 충적층 하부의 대규모 파쇄대의 방향과 연장성을 파악하고자 하였으며, 사용된 물리탐사법은 전기비저항 2차원탐사, 전자탐사 그리고 자력탐사이다. 전기비저항 탐사결과 충적층 내에서 남북방향의 연장성을 갖는 전기비저항 이상대가 파악되었으나, 자력탐사와 전자탐사의 측정자료에는 이 이상대에대한 반응을 관찰할 수 없었다. 이는 전자탐사의 경우, 가탐심도가 매우 작은 EM31을 사용하였고, 또한 자력탐사는 주변 지질매체 간의 대자율 차이가 없는 것에 기인한 것으로 판단된다. 따라서 향후 지하심부의 탐사를 위해 전자탐사법중 TEM 탐사를 실시할 계획이며, 또한 낮은 전기비저항 이상대의 연장성을 정확히 파악하기 위하여 기 측정된 전기비저항 탐사 측선 사이를 탐사할 예정이다.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.71-74
• /
• 2005

본 논문에서는 폐목재의 재활용을 위한 1차 파쇄기의 다음 공정인 2차 파쇄기에 대해 경계조건과 하중조건을 적응하여 유한요소법에 의한 ANSYS로 구조해석과 모달해석을 수행하여 응력(stress), 변형률(strain)을 구하고 구조적 타당성을 검토하였다. 이는 안전성을 고려한 설계의 기초 자료가 되며 고유진동수(natural frequency)를 구하여 모터의 회전을 제어함으로서 공진(resonance) 현상을 피하는데 있다.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.205-210
• /
• 2001

The effectiveness of extracorporeal shock wave lithotripter for the therapy of calculus has been well known in the field of urology. There are many studies about the performance of that and the influence into human body. Among them, it is an impertant issue that cavitation is always deal with shock wave. A medium of the shock wave is related to the cavitation phenomenon. In this paper, therefore, we analysis the spectra of radiated sounds and the break efficiency on focal region due to the medium of shock wave. The results show that the cavitation bubbles produce a harmful on the break efficiency and the stability of the radiated sounds due to the ESWL.

• Tunnel and Underground Space
• /
• v.24 no.6
• /
• pp.440-448
• /
• 2014

Hydraulic fracturing technique has been applied in various fields in order to improve the recovery of energy resources such as gas, oil and geothermal energy and research about finding out hydraulic fracturing mechanism and application has been steadily proceeded. In this study, for effective hydraulic fracturing, a scale modeling was progressed to simulate similarly with the actual site. In order to analyze the development aspect of surface crack initiation pressure during hydraulic fracturing followed by different conditions, the number of guide holes hydraulic fracturing test was carried out by setting up a hydraulic fracturing test equipment. Also, through the result, we tried to derive reliable results by comparing and analyzing the value of numerical modeling which is obtained based on the physical properties and mechanical properties with 3DEC, a three-dimensional discrete element method program. As a result, it is considered possible to generate effective crack using the guide hole.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2004

In bench blasting, rock fragmentation is one of the most important factors determining productivity. Rock fragmentation could be affected by various conditions and these were hewn that rock joint conditions and in-situ block sizes were the biggest effect on it. This research is focused on what or how to influence on rock fragmentation according to relation between blasting conditions and the in-situ rock conditions such as rock joint conditions and in-situ block size. Field measurements were carried out in 3 open pit limestone mines, where in-situ rock conditions and blasting conditions were fully investigated. The results show that the parameters interact with blasting conditions complicatedly and especially in-situ block size has bigger effects. Dip direction of major joint set also can affect on fragmentation. Mean fragment size become smallest when dip direction of major joint set is about $30^{\circ}$ with the bench direction. The reason is considered to be come from difference of propagation paths of elastic wave.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.30-37
• /
• 2013

A soft rock fracture zone is an important element for rock slope or earth retaining, however stability studies of earth retaining wall have been lack. Therefore, this study is analyzed for a behavior of earth retaining wall with condition of fracture zone or no fracture zone and then a numerical analysis (Finite Element Method) was performed considering interaction with field monitoring data between ground and structures. As a result, applied horizontal displacement on retaining wall is correspond between result of numerical analysis and field monitoring data and displacement point stress distribution with fracture zone condition analyzed to be stable side but no fracture zone condition is expressed to be unstable side. The results of this study is purpose for applying safety construction as a top priority at field when designing for future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1270-1277
• /
• 2014

This study investigated the quality characteristics of instant rice noodles manufactured with broken rice flour as an application of rice-processed products. We examined the physicochemical characteristics of common rice flour (CRF), broken rice flour (BRF), and CRF mixed with BRF (CBRF). Futhermore, instant rice noodles were manufactured with these three types of rice flour, and their quality and sensory characteristics were also investigated. Damaged starch content and water-binding capacity of rice flour were highest in BRF. Particle size of rice flour was significantly different among the three types. RVA pasting viscosities of BRF and CBRF were higher than that of CRF. Volume after cooking of instant rice noodles increased in rice noodles made with broken rice flour (BRN). Turbidity and cooking loss of BRN were higher than those of common rice noodles (CON). For texture properties, CON displayed the highest hardness, adhesiveness, and chewiness. In the sensory evaluation, springiness and overall acceptability values of CON were significantly higher than those of other rice noodle types (BRN and CBRN). In conclusion, BRN showed increased cooking loss and turbidity with reduced texture and overall acceptability values. The results of this study suggest that added amount of CRF may significantly increase the overall quality of instant rice noodles prepared with BRF.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.263-268
• /
• 2006

Probiotics including Lactobacillus acidophilus, refer to a group of nonpathogenic organisms that protect the human host against gastrointestinal(GI) infections by pathogenic bacteria such as Shiga toxin-producing E. coli(STEC). In the study, the inhibitory effects of STEC ATCC 43894 adhesion by L. acidophilus A4 was investigated on the HT-29 epithelial cells. Specific proteins regulated by cell Iysates of L. acidophilus A4 on STEC ATCC 43894 were also characterized by proteomic analysis. Both cell mass and Iysate of L. acidophilus A4 have exhibited the profound inhibitory activity on the HT-29 cells(about 1.5 log scale reduction). Two-dimensional gel electrophoresis(2-DE) revealed seven proteins that were up-regulated by cell Iysates of L. acidophilus A4 and three proteins that were down-regulated. In addition, three protein spots were only detected in the presence of cell Iysates. These results suggest that inhibitory effects of STEC adhesion by L. acidophilus may be due to the regulation of specific protein of STEC.