• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.57-62
• /
• 2008

Difference of failure modes was studied by finite element analysis for elbows with local wall thinning area particularly at inner surface of intrados of the elbow. Longitudinal wall thinning length, minimum thickness were kept constant but circumferential wall thinning width was varied to get $90^{\circ}$, $180^{\circ}$ and $360^{\circ}$ thinning width. Elastic-plastic analysis were carried out under the combined loading conditions of internal pressure and in-plane bending moment closing the elbow. Von Mises stress were obtained from the outer surface central surface location in intrados, extrados and crown parts in elbow. The results showed that the plastic deformation and failure started from the crown location when the thinning width small ($90{\sim}180^{\circ}$). However, plastic collapse started from the intrados location when the thinning width is approaching $360^{\circ}C$. This should be reflected to assess structural integrity of elbows after wall thinning measurement is made.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2008

Recently, it has been reported that buried pipes' crack is concentrated on curved parts. In this study, 3D-Finite element analysis is performed for Analytical Evaluation on the Structural Safety of Horizontally Curved Parts of Buried Pipe. The constructed pipe cracked in curved parts of pipe is analyzed and all kinds of loads affected to buried pipes are considered. Displacement, stresses and buckling analysis are performed. The stress analysis shows that stress in curved parts is larger than stresses in straight parts and exceeds allowable stress in some parts. So, stress analysis on curved parts is needed for safety for buried pipe.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2022-2032
• /
• 1999

In recent years, the subject of remaining life assessment has drawn considerable attention in the power generation industry. In power generation systems a variety of structural components, such as steam pipes, turbine rotors, and superheater headers, typically operate at high temperatures and high pressures. Thus a life prediction methodology accounting for fracture and rupture is increasingly needed for these components. For accurate failure assessment, in addition to the single parameter such as K or J-integral used in traditional fracture mechanics, the second parameter like T-stress describing the constraint is needed. The most critical defects in such structures are generally found in the form of semi-elliptical surface cracks in the welded piping-joints. In this work, selecting the structures of surface-cracked plate and straight pipe, we first perform line-spring finite element modeling, and accompanying elastic-plastic finite element analyses. We then present a framework for including constraint effects (T-stress effects) in the R6 failure assessment diagram approach for fracture assessment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.25-33
• /
• 2003

The failure load and mode of the unidirectional and fabric hybrid composite laminate joints are studied by test and finite element analysis. Test is conducted for the specimens with nine various geometries under pin loading. Finite element analysis is performed considering the contact and friction effects between the pin and laminate by MSC/NASTRAN. Failure is estimated by Tsai-Wu and Yamada-Sun criteria on the characteristic curve. While the failure of the specimens with the small width and edge length are much affected by the joint geometry, the geometry effects are negligible in the specimens with large width and edge length. Finite element analysis based on the characteristic length method reasonably predicts the failure load and mode of the joints.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.701-706
• /
• 1997

원자로 압력용기 대형 냉각재상실사고에 기인하는 노심용융물사고의 영향을 검토하기 위하여 기초적인 건전성평가를 수행하였다. 먼저 유한요소해석을 통해 노심용융물양과 경계조건 변화에 따른 원자로 압력용기의 온도 및 응력 분포를 결정하였으며, 결정된 온도와 응력 분포와 Larson-Miller 곡선과 손상 법칙을 이용하여 원자로 압력용기의 손상 정도와 파손 시간을 계산하였다. 이때 재료물성치는 기존 문헌에 제시된 온도 의존적인 값을 선정하여 사용하였으며, 노심용융물양과 경계조건이 원자로 압력용기의 건전성에 미치는 영향을 비교 고찰하여 향후 연구방향을 도출하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.6
• /
• pp.39-46
• /
• 2009

The selection of an evaluation response spectrum can have a significant effect on the seismic fragility evaluation of a structure. A method for modifying the seismic fragility parameters that are calculated based on the design spectrum is described in this study. The modification factor is used to modify the original fragility parameters. The HCLPF (High Confidence of Low Probability of Failure) acceleration levels of the electric system using previous design spectrum and uniform hazard spectrum (UHS) were compared. Finally, seismic risk analyses were performed according to a uniform hazard spectrum. From the results, it was concluded that based on the design spectrum, seismic risk for the electric system might be underestimated.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.745-750
• /
• 1998

원자로 압력용기 대형 냉각재상실사고에 기인하는 노심용융사고시 노심용융물과 내벽사이의 간극 및 외벽의 열대류계수의 건전성에 대한 영향을 고찰하기 위하여 건전성평가를 수행하였다. 먼저 유한요소해석을 통해 간극 고려 여부와 외벽의 열대류계수 변화에 따른 원자로 압력용기의 온도 및 응력 분포를 결정하였으며, 결정된 온도 및 응력 분포, Larson-Miller 곡선과 손상 법칙을 이용하여 원자로 압력용기의 손상 정도와 파손 시간을 계산하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.15-24
• /
• 1997

최근 우리나라에도 많은 지진사례가 보고되고 있으며, 이러한 지진하중은 원전설비 및 각종 기계설비등의 가동중 파손을 유발시킬 수 있는 잠재적 위험성이 높다. 이에 지진하중에 대한 안전성 확보의 필요성이 점차 대두되고 있다. 지진하중은 종ㆍ횡파에 의한 인장ㆍ압축이 반복되는 역사이클하중(reverse cyclic loading)형태로, 현재까지는 이를 고려한 설계개념이 미흡한 실정이며 이에 대한 파괴물성치의 확보는 물론 파괴물성치 평가 절차도 확립되어 있지 않은 상태이다. 따라서 지진하중에 대한 안전성확보를 위해서는, 역사이클 하중이 재료의 파괴특성 특히, 파괴저항(J-R)곡선에 미치는 영향이 고찰되어야 할 것이다. (중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.255-263
• /
• 2014

In this paper, seismic fragility analysis of lightning arrester is performed using capacity spectrum method(CSM). Since seismic fragility analysis of structure with many structural members is required to calculate many inelastic responses for several tens or hundreds of ground motions, simple method such as CSM is more appropriate than response history analysis(RHA). In general, accuracy of seismic response evaluated by CSM is less than that by RHA. In order to increase accuracy of CSM, equivalent SDOF method and performance point calculation technique are applied to CSM. Seismic fragility method proposed by Shinozuka et al. is used. In order to evaluate site effect of ground motions on seismic fragility, 60 different site classification earthquakes are selected as input ground motions. From the seismic fragility curves of lightning arrester evaluated by CSM and RHA, it can be observed that the seismic fragility curves evaluated by CSM are very similar to those by RHA. Also, it can be observed that main seismic failure mode of lightning arrest is bushing breakage.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.226-232
• /
• 2002

포장이란 유통단계에서 제품이 파손되거나 손상되지 않도록 보호하는 수단이며 원가절감과 생산성 향상을 통한 상품성의 제고는 물론 부가가치 증대 및 매출신장에도 큰 영향을 미친다. 더욱이 포장재료의 재활용, 환경친화성 신소재 개발 등에 따른 포장의 중요성에 대한 인식의 전환이 요구된다. 최근 환경보호 문제가 전 세계적으로 확대되면서 포장폐기물 처리의 중요성이 새로이 인식되어, 포장완충재의 주종을 이루던 플라스틱계 재료의 사용이 환경오염과 관련하여 엄격히 규제됨에 따라 환경친화력이 우수한 지류완충재의 사용이 증가하고 있으며, 농산물의 직거래가 활발해지고 생산자 실명제를 도입한 결과 농산물 포장용 골판지 상자의 기능이 운반용에서 판매용으로 전환되고 있으며 화려한 디자인과 필요이상의 강도로 설계, 유통되고 있어 과대포장이 심각한 수준에 달하고 있다. 유통과정 중 제품을 적절히 보호하고 적정 포장비로 물류합리화를 위해서는 제품의 완충 및 적정포장설계가 필요하며, 이를 위한 첫 번째 조건이 완충재 자체에 대한 특성의 평가와 이의 객관적 자료화이다. (중략)