• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.716-720
• /
• 1996

In this work the surface damage mechanism of hard disk was investigated. Experiments were peformed to simulate the contact during start and stop. Evidence of significant surface damage appeared after 20,000 cycles. It was found that despite higher hardness, the slider showed more signs of damage than the disk. Optical microscopy showed that the surface was damaged by abrasive action as well as adhesion of wear debris.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.388-394
• /
• 2003

This paper deals with a premature failure mechanism of deep grooved ball bearing for automobiles. A close examination of used bearings revealed that the premature failure could be arose by dents on the ball. Universal testing machine with specially designed tools is used to simulate the practical dents on the ball and test bearings are assembled with dented balls and new hearing components. The endurance test results showed that the dents on the balls were printed on the races and these phenomena come to premature failure.

• 방재와보험
• /
• s.108
• /
• pp.30-35
• /
• 2005

배선기구는 오랜 시간이 경과하면 절연성이 저하하거나 접촉부분이 탄화되어 발열 또는 발화원이 될 수 있다. 절연재료의 파손, 이상전압에 의한 절연파괴, 허용전류를 넘는 과전류에 의한 열적열화 등은 절연내력이 점차지하하여 마침내 절연재료의 열화에 의해 발화의 원인이 되므로 상시 점검하고 주의를 기울여야 한다.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.92-102
• /
• 1996

In this research, to develope the A1 7075/CFRP multilayered hybrid composites, CRALL(Carbon Reinforced aluminum lamiate) specimens were processed by autoclavecuring system that curing temperature, time, surface pretreatment condition of aluminum were constant. Andthe fatigye life and failure mechanism on CFRP volume fraction and fiber orientation of CRALLspecimens were investigated. A fatigue life was greatly influenced by effect of CFRP fiber volume fraction but it was less effected than those of fiber orientation. The fatigue failure arised from interface delamination of CFRP and aluminum sheet after shear fracture of aluminum layer. The failure mechanism is assumed that the aluminum laminates which divide the CFRP into many thim layers tend to arrest the failure propagation.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.139-145
• /
• 2004

용접산업이 발전함에 따라 가스메탈아크 용접에서 고내마모성의 콘택트 팁이 요구되어지고 있다. 현재 국내외에서는 콘택트팁에 대한 수명평가 기준이 없으며, 일부 업계에서 자체 규격을 제정하여 운용하고 있지만 근거가 명확하지 않다. 따라서 본 연구에서는 콘택트팁의 신뢰성 평가기준을 제정하고자 하였다. 팁의 주요 파손기구로는 고온 마찰마모, 전기적 에로존, 번백 등이 있다. 신뢰성 평가는 경도 시험, 열처리 후 경도, 용접 마모, 전기전도도를 시험으로 구성되었다. 팁의 수명은 마모가 45%에 도달했을 경우 송급된 와이어 총 길이로 하였으며, 4시간까지 마모시험 한 결과를 근거로하여 한계수명을 추정하였다. 본 연구에서는 세 가지 조성의 다섯 가지의 콘택트팁에 대하여 4시간동안 내마모성 실험을 하였으며, 마모정도는 1시간 단위로 면적비를 백분율로 환산하여 측정하였다. 실험 결과 가공경화형팁은 1시간이내에 재결정 및 입자성장에 의한 경도 저하로 가공경화가 팁 수명에 지속적 영향을 주지 못하였다. 반면, 석출경화형팁은 석출경화 효과가 지속되어 가공경화형팁보다 수명이 향상 되었다.

• 한국가스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.121-126
• /
• 2003

LPG차량이 연료충전중에 운전자 부주의로 오발진하는 경우 설비파손 방지를 위해 자동차와 디스펜서의 설치한 세이프티커플링의 주요 사고원인은 안전장치인 커플링이 분리되지 않아 발생하고 있으며, 사고로 설비파손으로 인한 부수적인 위험도가 크다 따라서 본 고에서는 세이프티커플링이 분리되지 않는 원인을 파악하기 위하여 노후시료의 분리하중, 열화물질의 분석 및 기구적 원인을 분석하였으며, 특히 커플링이 각도에 의해 분리가 되지 않는 조건을 각 부정합 손상으로 정의하고 안전장치로서 제 기능을 수행할 수 있는 방법에 대하여 고찰하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.321-326
• /
• 2021

This paper presents a technique to minimize damaged wafers during loading. A thin wafer used in solar cells and semiconductors can be damaged easily. This makes it difficult to separate the wafer due to surface tension between the loaded wafers. A technique for minimizing damaged wafers is to supply compressed air to the wafer and simultaneously apply a small horizontal movement mechanism. The main experimental factors used in this study were the supply speed of wafers, the nozzle pressure of the compressed air, and the suction time of a vacuum head. A higher supply speed of the wafer under the same nozzle pressure and lower nozzle pressure under the same supply speed resulted in a higher failure rate. Furthermore, the damage rate, according to the wafer supply speed, was unaffected by the suction time to grip a wafer. The optimal experiment conditions within the experimental range of this study are the wafer supply speed of 600 ea/hr, nozzle air pressure of 0.55 MPa, and suction time of 0.9 sec at the vacuum head. In addition, the technology improved by the repeatability performance tests can minimize the damaged wafer rate.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.61-66
• /
• 1999

반복 응력 상태 아래서 알루미나 세라믹의 피로 표면손상 누적현상이 분석되었다. 연속 미끄럼 접촉 시에 발생하는 응력 상태를 재현하기 위해서 동시에 작용하는 수직-수평 반복 압축하중 기법이 사용되었다. 알루미나 구와 평판의 접촉면에서 알루미나 미세 결정의 피로 파손에 의한 마모 입자 형성 기구가 관찰되었고, 반복하중의 횟수와 수직-수평 하중비가 커질수록 마모량은 증가하였다. 반복 접촉하중에 의한 표면손상 누적이 접촉 수직 변위 측정으로 정량화 되었다. 두 접촉 구조물의 강성 (하중-변위 선도의 기울기) 변화가 두 재질의 탄성계수의 변화로 표현되었다.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.1-6
• /
• 2013

A SIM card socket is used for a cell phone to fix an USIM card and a push-push mechanism is typically employed in the SIM card socket for a user convenience. A SIM card is inserted with locking when a user pushes the card once and a SIM card is removed with unlocking when a user pushes the card again. A push-push mechanism is operated by a heart-cam structure and a main spring. A cam slider and a cam stick consisting a push-push mechanism may be broken because of the main spring. So, dynamic stress at a cam slider and a cam stick which is generated by a main spring during operating should be analyzed and considered in the push-push mechanism design. In this paper, a flexible multibody model of a push-push mechanism was developed to analyze dynamic stress at a cam slider and a cam stick.

• Journal of the Korea Convergence Society
• /
• v.6 no.2
• /
• pp.19-24
• /
• 2015

Nowadays, the number of people who do not move actively or are treated for rehabilitation is increasing because of the disorder or the paralysis of their own lower body by the industrial disaster. In this study, the walker for the people whose bodies are not convenient or the old is investigated. The walkers due to the height of walker are designed and the structural simulation analysis is carried out. The study models of walker are modelled with CATIA program and analyzed with ANSYS program. As the analysis result, the models of 1, 2 and 3 have the maximum stresses extremely below the yield stress of this model and the elastic deformations at these models occurs. Among these models, As the maximum deformation of model 3 has the least value among these models, models 3 is thought to have the best durability. The safety of walker model can be estimated by the basis of the result of this study. The damage can be prevented and the durability is examined by applying this result into the design of walker. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.