• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1281-1285
• /
• 2006

하천제방 붕괴시 홍수파가 제내지에서 거동하는 양상을 파악하는 것은 홍수피해를 저감하는 데 있어서 매우 중요하다. 실제 제내지에서의 범람형태에 크고, 작은 영향을 미치는 인자들은 제내지 지형 및 구조물과 초기 제내지범람상태, 하도형태, 홍수수문곡선, 제방붕괴시 붕괴면 경사 및 붕괴시간 등 많이 있으나, 본 연구에서는 제방붕괴폭과 붕괴지속시간에 따른 홍수파의 형태, 유속, 수심, 방향 등의 일반적인 법칙성을 찾고자 한다. 본 연구에서 사용된 실험수조의 전체 크기는 가로 30m, 세로 30m이며, 수조 내부에 제내지, 제방, 하도를 제작하였다. 그림 1에서 보는 바와 같이 하도는 폭 5m, 길이 30m이며, 제내지는 폭 28m, 길이 24m이다. 하도와 제내지의 하상은 수평이며, 시멘트 모르타르로 표면을 처리하였다. 제방붕괴 재현장치는 최대붕괴폭 4m, 높이 0.6m가 되도록 하였으며, 하도의 중간지점에 설치하였다. 하도에서의 초기수심은 $h_o$이며, 제내지는 건조상태이다. 제방붕괴장치의 개방속도는 $0{\sim}18cm/sec$범위에서 조정이 가능하다. 실험결과, 제방붕괴폭과 제방붕괴지속시간은 제내지에서의 홍수파 전면(wave-front)의 이동속도와 제내지에서의 시간별 수심변화에 영향을 주는 것으로 나타났으며, 제내지에서의 최대수심은 제방붕괴폭과 제방붕괴 지속시간에 의한 영향이 거의 없는 것으로 나타났다.

• Journal of Korea Water Resources Association
• /
• v.54 no.1
• /
• pp.39-48
• /
• 2021

The experiment of rip current at successive ends of breaking wave crests was conducted in a laboratory wave basin, and its time-varying evolution according to incident wave durations was observed by using ortho-rectified images. The experiment utilized the generation of a quasi nodal line of the honeycomb-pattern waves (i.e., intersecting wave trains) formed by out-of-phase motion of two piston-type wave makers arranged in the transverse direction, instead of the original honeycomb pattern waves which are generated when two wave trains propagate with slightly different wave directions. The particle moving distance and velocity caused by the rip current were measured by using the particle tracking technique. As a result, the rip current was survived for a while even without incident waves after its generation due to several successive ends of wave crests, and it moved the particles further out to sea.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.120-127
• /
• 2012

Exploratory data analysis was carried out by using the long-term wave climate data in Sokcho coastal zone. The main features found in this study are as follows. The coefficient of variations on the wave height and period are about 0.11 and 0.02, respectively. It also shows that the annual components of the wave height and period are dominant and their amplitudes are 0.24 m and 0.56 seconds, respectively. The amount of intra-annual variation range is about two times greater than that of the inter-annual variation range. The distribution shapes of the wave data are very similar to the log-normal and GEV(generalized extreme value) functions. However, the goodness-of-fit tests based on the KS test show as "rejected" for all suggested density functions. Then, the structure of the timeseries wave height data is roughly estimated as AR(3) model. Based on the wave duration results, it is clearly shown that the continuous and maximum duration is decreased as a power function shape and the total duration is exponentially decreased. Meanwhile, the environment of the Sokcho coastal zone is classified as a wave-dominated environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.43-50
• /
• 2012

The effects of parameters related to the finite element simulation of the laser shock peening(LSP) process on the residual stresses of Inconel alloy 600 steel are discussed. In particular, we focus on the maximum pressure, pressure pulse duration, laser spot size, and number of shots. It is found that certain ranges of the maximum pressure and pulse duration can produce the maximum compressive residual stresses near the surface, and thus proper choices of these parameters are important. The residual stresses are not affected by the laser spot size, provided it is larger than a certain size. The magnitudes of the compressive residual stresses and the plastically affected depths are found to increase with an increasing number of shots, but this effect is less pronounced for more shots.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.183-193
• /
• 2019

This study developed a shockwave detection and prediction of their extinction point method based on continuous wavelet transform using trajectory data from probe vehicles equipped with automotive sensors.. To analyze the effectiveness of the proposed method, this paper proposed two measures which are a distance error between the extinction points of the predictor and an time-location error of the extinction points. The proposed concept was proved using the micro simulation based experiment with three exogenous variables of traffic volume, lane-close duration, market penetration of probe vehicles. The analysis results show that the proposed method is capable of detecting the traffic shockwaves as well as predicting their extinction point, and also that the accuracy of the proposed method is highly dependent on the rate of the probe vehicles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2000.05a
• /
• pp.973-979
• /
• 2000

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.189-195
• /
• 2004

The underwater sound of California gary whale was analyzed to discuss obtained results from the previous data to compare the underwater sound between Korean gray whale and California gray whale. The frequency of low frequency rumble which occupy about 50% of the underwater sound changed to max. 654Hz and the average of its lasted time was 570msec. The range of frequency variation was coincided as compared with the previous data. The range of frequency variation for the bubble type sounds and knocks was 24${\sim}$1029Hz, respectively. The average of lasted time was 1100msec and 1364msec, respectively. The range of frequency variation and lasted time of bubble type sounds was higher than the previous result while the sound of knocks was coincided. The range of frequency variation for the sound of bong, pluses and chirps was 34${\sim}$213Hz, 75${\sim}$360Hz and 120${\sim}$200Hz, respectively and the average of lasted time was 84msec, 873msec and 80msec, respectively.

• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.10-16
• /
• 2019

Information on overpressure, positive phase duration, and impulse are required to assess the effects of shock waves or pressure waves on the structure. In this study, the overpressure and positive phase duration were determined by applying the Multi-Energy Method, which is found to be effective in analyzing the explosion of vapor clouds. Based on the total heat of combustion estimated in the cyclohexane vapor cloud explosion in the Nypro Ltd(UK), overpressure and positive phase duration at the distance of 40, 80, 120, 160, 200, 240, 280, 320, 360(m) from the source of explosion were evaluated. Overpressure was shown to decrease exponentially and positive phase duration increased almost linearly with distance. A probit function was used to assess the probability of damages for the structures at each distance using the overpressure and impact obtained at the above mentioned distances. The Analyses of probability of damages have shown that there is a high probability of collapse at distances within 120m, major damage to structures within 240m, and minor damage and breakage of window panes of structures occur over the entire distances.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.489-498
• /
• 2018

In this paper, a target detection method based on beamspace-domain multichannel nonnegative matrix factorization is studied when an echo of continuous-wave ping is received from a low-Doppler target in reverberant environment. If the receiver of the continuous-wave active sonar moves, the frequency range of the reverberation is broadened due to the Doppler effect, so the low-Doppler target echo is interfered by the reverberation in this case. The developed algorithm analyzes the multichannel spectrogram of the received signal into frequency bases, time bases, and beamformer gains using the beamspace-domain multichannel nonnnegative matrix factorization, then the algorithm estimates the frequency, time, and bearing of target echo by choosing a proper basis. To analyze the performance of the developed algorithm, simulations were performed in various signal-to-reverberation conditions. The results show that the proposed algorithm can estimate the frequency, time, and bearing, but the performance was degraded in the low signal-to-reverberation condition. It is expected that modifying the selection algorithm of the target echo basis can enhance the performance according to the simulation results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.703-703
• /
• 2012

대규모 하천이 많은 미국과 유럽 등은 정상 침투해석을 실시하여 제방을 설계하지만, 우리나라의 경우 상류 지역은 하천경사가 급하여 홍수지속시간이 짧고, 하류 지역은 하천경사가 완만하여 홍수지속시간이 길어 비정상 침투해석을 통해 제방을 설계한다. 설계 홍수파형을 정상상태로 해석하면 대상지점의 홍수파형이 갖는 홍수지속시간과 감수부 경사가 고려되지 않아, 상류 지역은 과대한 외력이 설정될 수 있으며, 하류 지역은 과소한 외력조건으로 과소 설계될 우려가 있어 시간에 따른 수위 변화를 고려한 비정상 침투해석이 필요하다. 비정상 침투해석을 위해서는 제방에 대한 외력조건으로 적용될 하천의 홍수파형이 필요하지만 국내에서는 홍수위와 지속시간 등 홍수파형의 시간분포에 대한 명확한 기준이 없어서 실무에서는 설계하고자하는 대상지점의 계획홍수량에 사용된 홍수파형의 계획홍수위와 홍수지속시간을 이용하여 설계홍수파형을 결정하여 사용하고 있다. 본 연구는 제방에 대한 부정류 침투해석을 위해 사용되는 설계홍수파형을 결정하는 방법을 소개하고, 우리나라 5대강 유역에 위치한 수위관측소 중 수위자료가 충분히 구축된 지점을 대상으로 과거 홍수사상 기간의 수위수문곡선과 계획홍수량 산정에 사용되었던 설계수문곡선을 이용하여 홍수파형을 결정하였다. 제방의 비정상 침투해석을 위한 설계홍수파형은 홍수지속시간과 감수부 경사로 결정된다. 본 연구에서 산정한 설계홍수파의 홍수지속시간은 대부분의 지점에서 계획홍수파의 지속시간보다 크게 산정되었으며, 실무에서 사용되는 계획홍수파의 지속시간이 과소산정되었음을 알 수 있었다. 홍수파의 감수부 경사의 경우, 본 연구에서 산정한 설계홍수파의 감수부 경사가 계획홍수파의 감수부 경사보다 비교적 완만한 것으로 나타났으며, 이는 지속시간이 긴 실제 홍수사상이 반영된 결과로 판단된다. 현재 비정상 침투해석을 위해 외력으로 설정되는 홍수파형은 계획홍수량 산정시 이용한 계획 홍수파형만을 사용한다. 이 경우 과거 홍수사상의 홍수지속시간이 반영되지 않아 안정성 측면에서 계획홍수파형과 과거 홍수를 모두 고려한 본 연구의 방법이 더 타당할 것으로 판단된다.