• Proceedings of the Korea Water Resources Association Conference
• /
• 1990.07a
• /
• pp.221-221
• /
• 1990

진하 해수욕장은 부산에서 약 40km 정도 동해안도로를 거슬러 올라가면 경남 울주군 진하리에 위치한 조그마한 자연해변의 해수욕장이다. 해수욕장의 동쪽에서는 회야천이 흘러 들어오고, 이 하천의 3km 상류지점에는 댐을 축조하여 온산공단 및 주변지역의 생활용수를 공급하고 있다. 어울려서, 쾌적한 위락시설 단지로서는 최적이라고 생각된다. 현재 이 해안은 매년 침식이 진행되면서 해수욕을 할 수 있는 해변 공간이 줄어들고 있는 실정이다. 따라서 이 해안을 보전하기 위해서 관청과 주민들은 많은 심혈을 기울이고 있는 실정이다. 본 연구의 조사단은 1987년부터 해마다 수침측량을 실시하여 해수욕장의 지형변화를 조사하고 있다. 특히 이 해수욕장의 사빈은 몇년전 부터, 침식형의 사빈으로 변화되어 매년 많은 모래가 유실되는 현상이 발생하고 있어, 관청 및 주민들의 관심을 집중시키고 있다. 따라서, 금년에도 울주군청에서는 회야강 하구에 생성된 사주를 준설하여 준설된 모래를 해수욕장에 인공적으로 투입하여 양빈을 실시하고 있는 실정이다. 이 작업은 하구폐색의 문제를 해결할 뿐만 아니라 선박의 운행에도 큰 도움을 주고 있다. 이러한 작업은 기초해안 자료를 충분히 검토된 상태에서 실시되어야 한다. 그러치 못할 경우는 인위적으로 투입된 모래는 파랑에 의해서 다시 심해방향이나, 해안류를 따라서 다시 하구로 밀려오는 현상이 일어 날 것이다. 본 연구는 회야강 하구의 지형변화와 진하 해수욕장의 사빈의 변화를 정확히 파악하고져 단기간 동안 심천 측량을 실시한 결과를 이용하여 기존이론으로 해석한 결과를 제시함을 목적으로 한다.고 동시에 광 스트레스에 대한 저해를 감소시키는 것으로 보인다. 있다. 청주권의 무심천도 계획상은 대청댐의 물을 공급 받을수도 있도록 되어 있으나 현실상으로 상수도 원수로서의 공급마저도 매년 심한 원수 수질 문제(5-6월, 10월경의 취수장 부근의 부영양화 현상으로 인한 악취와 물 맛의 문제)를 1984년부터 겪고 있다. 이와 같이 도시권 하천의 수자원은 자연적, 인위적, 경제적, 법적, 제도적 여러 제한 요소로서 특성을 가지고 있으며 이는 날로 심해 가고 있는 실정이다. 그러므로 최적 물관리 시스템의 개발이 새로이 시작하는 수자원 개발 사업에서는 계획 단계에서부터 절실히 요구되는 바이며 기존 시설물의 관리 운영은 과감히 그 운영 관리 기준을 보완 재 정비하여야 할 것이다. 지금까지 대부분의 수자원 종합 개발 계획이 홍수방이나 용수 공급 및 수력 개발 등에 주력하여 왔으나 이제는 보다 더 수자원의 환경 보전적 차원과 도시의 안정적 발달을 위한 지역 및 권역 계획과 연계지워져서 양적인 안정 공급과 더불어 질적인 향상과 연계지워서 경제-사회적 요구에 부응할 수 있도록 도시권의 수자원을 최적 관리할 수 있는 방안을 강구하여야 할 것이다. 이는 각 도시 하천의 수자원의 정량적·정성적인 특성 및 제한 요소를 충분히 감안하여 수요-공급 개념에 의하여 과감히 기존 시설(예: 팔당댐의 운영, 대청댐의 운영 등)의 관리 운영 체계를 개선하여 나가야 할 것이며, 수질 보전적-환경 보전 차원에서 저수관리 체계를 확고히 할 수 있는 방안을 강구하여야 할 것이다.펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.지역

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.1
• /
• pp.46-62
• /
• 1989

This paper presents the results of full-scale structural measurements of 4,800 unit pure car carriers "HYUNDAI NO.103" and "HYUNDAI NO.105" on one voyage respectively for each ship, especially in order to investigate the local strength of partial bulkhead above free-board deck. With the measured data, the short-term frequency analyses have been performed. The results show that the wave-induced stresses follow, on the whole, well the Rayleigh distribution. In addition, it has been found from the measured data that transverse local stresses at bulkhead section have a very close relation with the acceleration in athwartship direction. Finally, the long-term analysis has been attempted by using the following two statistical distributions mainly in order to estimate the maximum stress amplitude at the corners of partial bulkhead. 1) Exponential distribution of cycles of stress amplitude 2) Double exponential distribution of extreme values of stress amplitude for each short-term analysis The results of these two cases show a good agreement with each other. For example, the estimated maximum stress amplitude for 10 years at port-side corner of Fr. 132 partial bulkhead is $2125kg/cm^2$ for the first case and $2170kg/cm^2$ for the second case just based on the measured data.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.9-20
• /
• 1989

It is important to enhance the safety of ship structures as much as possible in order to prevent the disastrous collapse of structures. In fact, the strength problem of structures is closely related with the safety problem of structures. Recently, the direct calculation method using a rational approach based on the first principle is implemented into the structural design process instead of adopting empirical approach based on the rules. The structural designer have shown increased concern with the problem of adequacy of conventional design method based on the safety factor since it does not fully take into account some degree of variability of the applied loads on and the strength of ship structures. To deal with the analysis of structures effectively, it is necessary to have three stages being equally treated. The first one is load analysis, second one response analysis, third one safety analysis. For marine structures, most of research effort has been however put into the first and second stages. The third stage is normally done by simple procedures. Hence, the various probabilistic methods are compared in order to establish the reliability analysis techniques for ship structures. As a result, the advanced level 2 method is selected as a most effective and accurate reliability method. The validity of this method is further demonstrated by comparing the results with the conventional method for the problem of the longitudinal strength of hull girder of Ro-Ro ship.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.41-53
• /
• 2013

This research was carried out to classify erosion shapes and sea-cliff erosion rates were estimated through periodic field survey in Dundu-ri, Anmyeondo. Based on the results of field measurements using the datum-point, the annual sea-cliff erosion rate was estimated about 25~102cm/yr by point. The erosion rate gradually increases from spring to summer, but tends to decrease slightly in autumn. Specifically, the erosion rate between June and July indicated a rather decreasing trend, but showed a sharp increase between July and September. This was attributed to erosion that proceeds more rapidly than during other periods due to severe rainstorms in summer that had a direct impact on the study area as well as storm surges caused by hurricanes. Afterwards, the sea-cliff erosion rate gradually decreased in autumn, but reflected an increasing trend again from December to January. This was attributed to the mechanical weathering that actively progresses as bed rocks on the sea-cliff undergo repeated freezing and thawing in winter. The seacliff in Dundu-ri is divided into three types according to the erosion shape. First, Type A is observed in the sea-cliff composed of the same bed rocks and hard rock stratum. Second, Type B is found in the sea-cliff with a relatively gentler slope compared to Type A, since weathering material including soil is formed on the surface of the sea-cliff consisting of the same bed rocks and hard rock stratum. Lastly, Type C is observed in the sea-cliff where hard rock stratum is mixed with soft rock stratum. In this case, the soft rock stratum slumps and erodes first by precipitation and wave energy, followed by additional slumping of the exposed hard rock stratum.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.710-718
• /
• 2017

After Typhoon Chaba (No.18, 2016) collided with Manseongri Beach, a coastal improvement project was carried out since strong external forces such as waves, storm surges and wave-induced currents were observed to cause beach deformation. The shoreline, beach area and beach volume were periodically surveyed. On the basis of this field data, the beach deformation that occurred at Manseongri Beach has been formally described. Over three months after beach nourishment work began, the beaches were gradually stabilized in terms of natural external forces. However, this stabilization was interrupted by Typhoon Chaba. After two months of typhoon weather, the beach returned to a stable state and no changes were observed until one year after the beach recovery work. Just after the typhoon hit, the shoreline receded from the northern side, where no reduction of external forces occurred, while the rear beach area submerged by breakwater advanced. Also, the beach volume decreased by $3,395m^3$ after the typhoon, due to erosion that occurred on the northern beach, with deposition taking place on the southern backshore area. Therefore, it has been concluded that the coastal improvement project undertaken at Manseongri Beach has significantly contributed to conservation in areas of wave-dominant sediment transport.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1031-1037
• /
• 2021

The frequency of marine accidents of vessels in Korea is steadily increasing and it is concentrated on small vessels with less than 10 tons of gross tonnage. Therefore, preventing capsizing accidents in small vessels is important to reduce the cost in terms of human and property damage due to such accidents. However, research on the seakeeping performance of small vessels has been insufficient, and there are no domestic and international regulations on seakeeping performance. Therefore, in this study, capsizing accidents caused by poor loading conditions were investigated by examining the adjudications of the small vessels in which the capsizing accidents occurred. Hydrostatic calculations and seakeeping performance analysis were performed for a representative vessel. A vessel generally performs a six-degree-of-freedom motion during operation. In this study, the response amplitude operator and response spectrum of a representative vessel were calculated to determine the roll motion. Moreover, a short-term statistical analysis of the vessel according to the loading conditions was performed for the wave stationary status for 3 h. From the results, it was estimated that, when the loading condition of a small vessel is poor, its roll motion increases, greatly reducing its stability.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.143-156
• /
• 2014

We reviewed investigation status on turbidity plume in the statement of marine environmental survey(2008 to 2012) associated with marine sand extraction projects. The survey statement from seven marine sand extraction sites (extraction area of Southern EEZ, extraction area of Western EEZ, relocation zone in the Western EEZ, sea area under jurisdiction of Taean-gun, sea area under jurisdiction of Ansan City, and two discrete sea areas under jurisdiction of Ongjin-gun) in the nearshore and offshore of Korea showed that in situ observations were carried out for the dispersion and transport of suspended sediments on two areas (One is a extraction area in the EEZs, the other is an area of coastal sites). However, sampling station and range have not been selected considering physical, geographical factors (tide, wave, stratification, water depth, etc.) and weather conditions (wind direction and velocity, fetch, duration, etc). Especially turbidity plumes originating from three sources, which include suspended sediments in overflow(or overspill) discharged from spillways and reject chutes of dredging vessel, and resuspended sediments from draghead at the seabed, may be transported to a far greater distance outside the boundary of the extraction site and have undesirable impacts on the marine environment and ecosystem. We address that behaviour of environmental pollutants such as suspended solids, nutrients, and metals should be extensively monitored and diagnosed during the dispersion and transport of the plume. Finally we suggest the necessity to supplement the current system of the sea area utilization consultation and establish the combined guidelines on marine sand extraction to collect basic data, to monitor cumulative effects, and to minimize environmental damages incurred by the aftermath of sand extraction.