• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.176-177
• /
• 2008

이 논문에서는 $0.35{\mu}m$ 공정으로 제작된 MOSFET의 고주파 동작 특성을 분석하였다. Multi-finger 형태인 게이트 폭의 길이 변화에 따른 특성 변화를 BSIM3v3 모델과 외부 기생 파라미터를 포함한 lumped element를 이용해 모델링을 하였다. 또한 Multi-finger 게이트 구조에서 게이트 finger 수의 증가에 따라 생기는 특성 변화를 각각의 구조에 따라 추출된 주요 기생 파라미터의 변화를 통해 분석하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.424-430
• /
• 2000

In order to develop an ultrasonic evaluation method for properties degradation of high temperature materials, a number of Cr-Mo-V steel samples were heat-treated and their damage mechanism was examined. Ultrasonic parameters such as velocity, attenuation, and more recently developed nonlinear acoustic parameter were measured. The nonlinear acoustic parameter was found to be most sensitive to material degradation mainly attributed to the precipitation of impurities in grain boundaries. When compared to the electrical resistivity results, the nonlinear parameters showed similar behavior. There existed a relatively good correlation between the nonlinear parameter and the fracture appearance transition temperature (FATT) obtained by Charpy V-notch impact test. Based on the relationship between the FATT and the fracture toughness ($K_{IC}$), correlation between the nonlinear parameter and $K_{IC}$ was established.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.176-181
• /
• 2005

This paper presents an equal bit rate control algorithm utilizing the statistical change between the previous frame and the current frame. The previous studies on the model-based rate control have focused on the models of bit rate and distortion in types of coders, in terms of the quantization parameter. The proposed algorithm improves the typical model-based rate control by updating a model parameter instead of modeling a better model of the rate and distortion. The proposed algorithm updates this model parameter by recognizing the change in statistics between the previous frame and the current frame. We implement the proposed algorithm in MPEG-4 coders and verify its performance while comparing it to the TMN8's approach (up to 0.6dB of improvement).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.14-19
• /
• 2013

Nonlinearity parameter is an inherent property of materials measuring fundamental acoustic amplitude($A_1$) and second harmonic amplitude($A_2$). However, measurement of $A_1$ and $A_2$ has complex calibration procedure, many researchers prefer to measure relative nonlinearity parameter rather than absolute nonlinearity parameter. But, relative nonlinearity parameter is only detect materials degradation with various degradation samples, it is limited application in determining third order elastic constants of materials. Therefore, in this study, the piezoelectric detection method is adopted to measure absolute nonlinearity parameter due to experimental simplicity compare to capacitive detector. Linearity of measurement system is verified by $A_1^2vsA_2$ plot, and we measured ultrasonic nonlinearity parameters of fused silica and Al2024-T4.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.329-335
• /
• 2010

Digital imaging detectors can use a variety of detection materials to convert X-ray radiation either to light or directly to electron charge. Many detectors such as amorphous silicon flat panels, CCDs, and CMOS photodiode arrays incorporate a scintillator screen to convert x-ray to light. The digital radiography systems based on semiconductor detectors, commonly referred to as flat panel detectors, are gaining popularity in the clinical & hospital. The X-ray detectors are described between a-Silicon based indirect type and a-Selenium based direct type. The DRS of detectors is used to convert the x-ray to electron hole pairs. Image processing is described by specific image features: Latitude compression, Contrast enhancement, Edge enhancement, Look up table, Noise suppression. The image features are tuned independently. The final enhancement result is a combination of all image features. The parameters are altered by using specific image features in the different several hospitals. The image in a radiological report consists of two image evaluation processes: Clinical image parameters and MTF is a descriptor of the spatial resolution of a digital imaging system. We used the edge test phantom and exposure procedure described in the IEC 61267 to obtain an edge spread function from which the MTF is calculated. We can compare image in the processing parameters to change between original and processed image data. The angle of the edge with respect to the axes of detector was varied in order to determine the MTF as a function of direction. Each MTF is integrated within the spatial resolution interval of 1.35-11.70 cycles/mm at the 50% MTF point. Each image enhancement parameters consists of edge, frequency, contrast, LUT, noise, sensitometry curve, threshold level, windows. The digital device is also shown to have good uniformity of MTF and image parameters across its modality. The measurements reported here represent a comprehensive evaluation of digital radiography system designed for use in the DRS. The results indicate that the parameter enables very good image quality in the digital radiography. Of course, the quality of image from a parameter is determined by other digital devices in addition to the proper clinical image.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.513-537
• /
• 2010

According to the "FDI-as-market-discipline" hypothesis, inward FDI acts as a mechanism of change in market structure affecting innovative activities of domestic firms. We used panel KIS data for testing this hypothesis. Binary probit estimation shows that, in contrast to the German case of Bertschek (1995), FDI is insignificant in Korean case for explaining product innovation. 1his result maybe comes from the fact that the industries in Korea are more monopolistic or oligopolistic than those of Germany. Using panel data, we tried random parameter estimation using matrix weighted average of GLS and OLS. The result shows different estimates from cross-section outcome and panel estimation with parameter homogeneity, so we can infer large parameter heterogeneity across firms. But, interpretation for FDI variable is similar across panel and cross-section estimation.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.5
• /
• pp.78-85
• /
• 1989

This paper describes a statistical methods and perception test for extracting the parameters to be used for the synthesis-by-rule of Korean plosives. Formant synthesizer is chosen for the synthesis of the phonemes. Speech materials for the analysis consists of 72 CV monosyllables from the single male speaker. The analysis is done mainly focused on the variation of parameters in time and frequency domain, then perception tests are executed to estimate the effects of variations of the formant transitions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2000

A numerical model is applied for predicting two-dimensional beach and dune erosion during severe storms. The model uses equation of sediment continuity and dynamic equation, governing the on-offshore sediment transport due to a disequilibrium of wave energy dissipation. And the model also uses sediment transport rate parameter K from dimensional analysis instead of that recommended by Kriebel. During a storm, a beach profile evolves to a form where the depth at the surf zone is related to the distance seaward of the waterline. In general, the erosion in the beach profile is found to be sensitive to equilibrium profile parameter, sediment transport rate parameter, storm surge level and breaking wave height.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2001.11b
• /
• pp.77-81
• /
• 2001

본 논문은 현재 국내 디지털 오디오 방송의 잠정 표준으로 채택된 Eureka-147 시스템에서의 멀티미디어 전송 프로토콜 규약인 MOT(Multimedia Object Transfer) 프로토콜을 적용하여 멀티미디어 파일을 전송할 경우의 성능 분석 및 파라미터 최적화 방법을 제시하였다. MOT 프로토콜은 멀티미디어 파일을 전송하는 세그먼트 크기, 세그먼트 반복횟수와 같은 파라미터 설정값에 따라서 FER(File Error Ratio)이 변화하므로, 성능을 최적화하기 위한 파라미터 설정이 중요하다. 세그먼트 내에서 비트 사이의 오류 사건이 독립이라는 가정하에서 MOT 파라미터 설정값을 찾는 이론적 수식을 제안하였고, 이동 채널 환경의 시뮬레이션을 통하여 이론식과 비교하였다.