• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.3
• /
• pp.172-180
• /
• 1998

It is attempted to verify the Quantitative relationship between fracture mechanical parameters (${\Delta}K$, $K_{max}$) and X-ray parameters (residual stress, half-value breadth) of A12009-15v/o $SiC_w$ composite, and normalized SS41 steel. In this study, fatigue crack propagation test were carried out and X-ray diffraction was applied to fatigue fractured surface in order to investigate the change of residual stress and half-value breadth on fatigue fractured surface. And it is loaded prestrain to each tensile specimen, A12009-15v/o $SiC_w$ composite(0.3, 0.5, 1, 1.5, 2%) and normalized SS41 steel(0.63, 2.25, 7.50, 13.7, 20%), for investigating plastic strain rate using nondestructive measurement method. X-ray diffraction was applied to the prestrained tensile specimens in order to measure the change of residual stress and half-value breadth.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.285-288
• /
• 2000

본 논문에서는 카메라 플랫홈의 흔들림 등으로 인한 외부 영향으로 출렁이는 비디오를 전자적으로 안정화시키는 방법을 제안한다. LOG operator〔1〕을 이용하여 특징점을 잡고 그 특징점을 중심으로 일정크기의 subblock에 대해서만 correlation을 구한다. Least Square를 이용하여 모션 파라메타를 측정하고 모션 보상을 행하는데 현재의 영상을 기준 좌표계로 변환하고 명암값 보간을 하게된다. 이 때 기존 연구에서 많이 사용한 bilinear 보간법의 단점인 대비가 첨예한 곳에서의 averaging 효과를 없애기 위해 본 연구에서는 대비가 첨예한 곳에서는 nearest neighbor 보간을 사용하고 그렇지 않은 곳에서는 bilinear 보간을 사용하는 hybrid한 방법을 채택하였다. 그 결과 사람이 카메라를 손에 들고 움직일 때 생기는 출렁이는 비디오에 대해 대부분의 카메라 움직임을 안정화시킬 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.171-175
• /
• 1987

An objective method for the evaluation of eating quality of cooked noodle was established by using a specially designed shear extrusion cell of Rheometer. From the force-distance curve, the maximum force, initial force, extrusion work, and the slope were determined. In a test with Korean dried noodles made from 17 types of Australian wheat flour, the maximum and initial forces and extrusion work could represent the firm-soft and chewy character, which govern mostly the preference of cooked noodle. On the other hand, the slope could distinguish the textural changes of cooked noodle during the storage after cooking. The parameters showed significant correlation with the protein content, water absorption, development time and extensibility of flour, but no correlation was obtained with the maximum viscosity of viscogram. For the estimation of textural preference, the correlation coefficient obtained from a multiple regression analysis using the maximum viscosity of viscogram and the maximum force of shear extrusion test as the two independent variables was not significantly higher than the coefficient obtained from a simple regression with the maximum force only.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.61-67
• /
• 2020

In this paper, we calculated the warpage of bare substrates and chip attached substrates by using FEM (Finite Element Method), and compared and analyzed the effect of the chips' attachment on warpage. Also, the effects of layer thickness of substrates for reducing warpage were analyzed and the conditions of layer thickness were analyzed by signal-to-noise ratio of Taguchi method. According to the analysis results, the direction of warpage pattern in substrates can change when chips are attached. Also, the warpage decreases as the difference in the CTE (coefficient of thermal expansion) between the top and bottom of the package decreases and the stiffness of the package increases after chips are loaded. In addition, according to the impact analysis of design parameters on substrates where chips are not attached, in order to reduce warpage, the inner layers of the circuit layer Cu1 and Cu4 has be controlled first, and then concentrated on the thickness of the solder resist on the bottom side and the thickness of the prepreg layer between Cu1 and Cu2.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.172-174
• /
• 2003

화상평면내 미지호흡운동에 기인한 MRI 아티팩트를 제거하기 위한 후처리방법을 제안한다. 본 연구에서 호흡운동은 2차원의 선형확대축소운동으로 모델화 된다. 신체조직을 비압축성 유체모양의 물질로 가정할때, 화상위에서의 단위체적당 푸로톤 밀도는 일정하다고 가정한다. 사용한 모델에 따르면 호흡운동은 위상 오차와 비균일표본화 및 왜곡된 진폭변조를 MR 데이터에 부여한다. 운동 파라메타가 이미 알려져 있거나 추정 가능하다고 할 때, MRI 아티팩트를 제거하기 위하여 중첩법에 기초를 둔 재구성 알고리즘을 이용한다. 운동 파라매타가 미지인 경우 스팩트럼 이동법을 적용해서 호흡변동함수와 x 방향 확대계수 및 x 방향 확대중심을 추정한다. 다음으로 에너지 최소법을 이용해서 ｙ 방향 확대계수 및 ｙ 방향 확대중심을 추정한다. 시뮬레이션을 통해서 제안한 방법의 유효성을 확인한다.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.114-119
• /
• 1998

Imperatorin, 9-[(3-methyl-2-butenyl)oxy]-7H-furo[3,2-g][1]benzopyran-7-one의 분자 및 결정구조를 X-선 회절법으로 연구하였다. 이 결정의 분자식은 C16H14O4, 결정계는 삼사정계이고 공간군은 P이다. 단위포상수는 a=11.818(1) , b=11.906(1) , c=11.059(1) 이며, α=96.32(1)o, β=90.74(1)o, γ=64.88(1)o, V=13.993(2) 3, T=293 K, Z=4이다. 구조해석에 사용한 X-선은 CuKα선(λ=1.5418 )을 사용하였다. 구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종 신뢰도 R 값은 F0>4σ(F0)인 3951개의 독립회절데이타로 356개 파라메타에 대해 R=7.02%이다.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.54-62
• /
• 2017

This paper presents a design of the Interior Permanent Magnet Synchronous Motor (IPMSM). an initial design process is accomplished by using the parametric design. In the design process, motor characteristics of parameters is computed by the d-q axis equivalent circuit model. Then, an optimal design process is accomplished by combination the experimental design and the response surface method. Finally, the design and analysis results are verified with experimental results.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.17-24
• /
• 1997

As the first step to estimate the potential natural vegetation distribution of the globe, the best spherical interpolation method was developed to the temperature and precipitation which have close relation to the distribution pattern of world natural vegetation. For developing the interpolation method, a named Light Climatic Dataset composed of 1,060 stations around the globe was randomly divided into halves of feeding side and target side. The discrepancy between the observed and estimated values at the target stations was compared with combinations of parameters and methods. The estimated values were calculated to each combination which is all-out, constant radius and constant station methods in the selection of the feeding stations, n square reciprocal and negative exponential functions in weighting function of distance between feeding stations and each target, and oval weighting in direction of the feeding stations from each target. As a result, it turned out that the spherical interpolation with negative exponential weighting function fed from the constant radius stations ovally weighed yields the best estimates both for temperature and for precipitation. The parameters for temperature are $30^{\circ}$ in constant radius, 0.78 in negative exponential function and 0.4 in oval weighting, and for precipitation are $30^{\circ}$, 0.53 and 0.4, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.295-298
• /
• 2005

A minimum commitment method (MCM) was applied to predict the creep rupture life of type 316LN SS. For this purpose, a number of the creep rupture data for the type 316LN SS were collected through literature survey and experimental data of KAERl, Using the short-term creep rupture data under 2000 hr, the long-term creep rupture life above $10^5$ hour was predicted by means of the MCM. An optimum value of A, P and G function, used in the MCM equation, was determined respectively, and the creep rupture life with the A values in different temperatures was compared with the experimental data and the predicted curves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.875-886
• /
• 1994

This study is to develop an advanced storm runoff analysis program which takes geomorphological characteristics of watershed into consideration in determining model parameters. Basic concept of storm runoff modelling is based upon the kinematic wave theory. And numerical solution is obtained by the characteristic curve method. The storm runoff analysis program developed by this study is composed of multiple equivalent roughness sub-basins, each of which has two equivalent catchments on both side of a stream. Because it is based upon the stream-order of the Strahler system, the equivalent catchment-stream network reflects the stochastic geomorphological characteristics in the model parameter. Applicability and reliability of the storm runoff analysis program is evidenced by model calibration and verification process utilizing geographical and hydrological data of the Bocheong-river area which is a representative watershed of IHP projects in Korea. This study will hopefully contribute to hydrological calculation essentially required to understand water quality effect caused by regional development.