• Title/Summary/Keyword: 파도

Search Result 14,988, Processing Time 0.051 seconds

부유 랑뮤어 탐침법에서 다양한 전압파형에 대한 고조파 전류 특성 연구.

  • Kim, Yeong-Do;Kim, Yu-Sin;Jeong, Jin-Uk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.466-466
    • /
    • 2010
  • 유도결합형플라즈마(ICP)에서 부유 랑뮤어 탐침에 정현파, 톱니파, 사각파, 삼각파 형태의 전압 파형들을 쉬스에 인가하였을 때, 탐침으로 들어오는 고조파전류들의 특성을 넓은 범위에서 연구 하였다. 탐침으로 들어오는 플라즈마전류파형 및 기생전류파형의 모양과 고조파전류들에 대해 고찰하였고, 각각의 전압파형을 인가하였을 때 다양한 압력과 파워조건에서 부유 랑뮤어 탐침법을 이용하여 전자온도와 플라즈마 밀도를 측정하고, 측정결과는 싱글 랑뮤어 탐침법과 비교하였다. 정현파, 삼각파는 싱글 랑뮤어 탐침법과 잘 일치하는 결과를 보였고, 톱니파는 실험상의 오차로 정확한 측정이 안 되었으며, 사각파는 전류파형의 과도현상으로 인해 측정이 안되었다. 그 외에 기존의 부유 랑뮤어 탐침법과 다르게 부유전위의 변화와 제 1 고조파들의 비를 이용해서 전자온도를 구하는 방법도 소개한다.

  • PDF

Shock Wave phenomena in Fluid enguneerung(II) (유체공학에서 충격파현상(2))

  • 김희동
    • Journal of the KSME
    • /
    • v.35 no.1
    • /
    • pp.71-83
    • /
    • 1995
  • 최근 충격파현상을 이용하여 고온 고압의 상태를 용이하게 발생시킬 수 있는 기술 및 장치들이 여러 분야에서 요구되고 있으며, 이들에 대한 연구의 필요성이 갈수록 증대되어 가고 있다. 그 러나 우리나라에서의 충격파현상에 대한 이해와 지식은 비압축성 유체공학에 대한 연구에 비해 매우 미비한 실정이며, 이에 대한 관ㅅ미과 체계적인 연구가 절실한 실정이다. 일반적으로 충 격파현상을 이해하는 데에는 압축성 비정상흐름, 혹은 정상적인 초음속흐름에 대한 지식이 필 요하지만, 이 글에서는 충격파현상에 대한 이론적 기술들을 생략하고, 충격파현상들을 소개하기 위한 목적으로 충격파현상에 대한 현재의 연구동향과 충격파현상을 응용하는 실례들에 관해 간략히 기술하고, 충격파현상의 연구를 위해 필요한 충격과 발생장치에 대해서 기술하였다.

  • PDF

Experiment on Run-up Heights of Solitary Wave at East Coast Slopes (동해안 경사면에서의 고립파 처오름높이에 관한 수리실험)

  • Lee, Sewoong;Cho, Yong-Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.526-526
    • /
    • 2016
  • 고립파는 다른 파들과는 달리 파고만 주어지면 파형이 결정되고 변형 없이 장거리를 전파시켜 처오름높이를 가장 잘 재현할 수 있기 때문에 지진해일의 많은 연구에서 입사파로 사용되어 왔다. 본 연구에서는 한양대학교 수리학 및 해안공학 연구실에서 보유중인 서보-피스톤 타입 조파기로 고립파를 발생시켜 2차원 조파수조 내부에 설치되어있는 동해안 경사모형에서 각 수심 및 상대파고에 따른 고립파의 처오름높이 측정실험을 수행하였다. 다수의 파고계를 이용하여 각 구역에서 수심 및 상대파고에 따른 고립파의 파형을 측정하였고, 경사면에서 처오름높이 분포의 최대와 최소, 평균값을 측정하였다. 측정된 실험결과를 바탕으로 동해안에서의 고립파 처오름높이에 대해서 서술하였다.

  • PDF

램 가속기 탄체 형상에 따른 데토네이션파와 가속 특성에 관한 연구

  • 전용희;이재우;변영환
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1999.04a
    • /
    • pp.16-16
    • /
    • 1999
  • 램 가속기 탄체 형상에 따른 가속 특성에 대한 연구는 열적 질식 모드에 대하여 Washington 대학, ISL 연구소 등에서 실험적으로 수행되어 졌으나 초폭굉 연소 모드에 대해서는 아직 미비한 실정이다. 초폭굉 연소 모드 램 가속기의 기본적인 탄체 형상은 원추-원통-원추로 이루어진 형상으로 탄체 전면에 형성된 경사 충격파가 탄체와 가속기 사이에서 반사되며 데토네이션파를 발생시켜 가속하게 된다. 탄체의 형상에 따라서 탄체 주위에 형성되는 충격파 구조는 차이를 나타내게 되고 발생되는 데토네이션파의 위치와 강도를 따라서 탄체의 가속특성은 상당한 차이를 나타낸다. 기본적으로 탄 체의 전면 형상은 경사 충격파의 강도와 단체 주위의 유동장의 특성을 결정하는 주요 요인이고 이에 따라 데토네이션파의 형성과 안정화 역시 결정되어 탄체의 가속 특성을 결정짓는다. 또한 데토네이션파를 임의의 위치에 형성하기 위해 이중 원추형상의 충격파-충격파 상호작용을 이용하여 데토네이션파를 발생시켜 탄체를 가속시킨다.

  • PDF

An Electromagnetic Shock Wave Generator Employing a Solenoid Coil for Extracorporeal Shock Wave Therapy: Construction and Acoustical Properties (체외 충격파 치료술을 위한 솔레노이드 코일을 이용한 전자기식 충격파 발생기: 구성 및 음향학적 특성)

  • Choi Min Joo;Lee Jong Soo;Kang Gwan Suk;Paeng Dong Guk;Lee Yoon Joon;Cho Chu Hyun;Rim Geun Hie
    • The Journal of the Acoustical Society of Korea
    • /
    • v.24 no.5
    • /
    • pp.271-281
    • /
    • 2005
  • An electromagnetic type shock wave generator suitable for extracorporeal shock wave therapy has been constructed by employing a solenoid coil. The Property of the shock waves produced by the shock wave generator was evaluated using a needle hydrophone. It was shown that, as the capacitor discharging voltage increased from 8 to 18 kV, the Positive Peak Pressure (P+) of the shock wave increased non-linearly from 10 to 77 Wa. In contrast. the negative peak Pressure (f) varied between -3.2 and -6.8 MPa. had its absolute maximum of -6.9 ma at 14 kV The peak amplitudes P+ measured repeatedly under the same voltage setting varied within $5\;\%$ from mean values and this is very small compared to about $50\;\%$ for electrohydraulic type shock wave generators. It could be observed, from the hydrophone signal recorded over 1 ms. several sequential acoustic impulses representing bubble collapses. namely. acoustic cavitation. induced by the shock wave. A technique based on wavelet transformation was used to accurately measure the time delay between the 1st and 2nd collapse known to be closely related to the shock strength. It was observed that the measured time delay increased almost linearly from 120 to $700\;{\mu}s$ with the shock wave Pressure P+ increasing from 10 to 77 MPa.

Acoustic Full-waveform Inversion Strategy for Multi-component Ocean-bottom Cable Data (다성분 해저면 탄성파 탐사자료에 대한 음향파 완전파형역산 전략)

  • Hwang, Jongha;Oh, Ju-Won;Lee, Jinhyung;Min, Dong-Joo;Jung, Heechul;Song, Youngsoo
    • Geophysics and Geophysical Exploration
    • /
    • v.23 no.1
    • /
    • pp.38-49
    • /
    • 2020
  • Full-waveform inversion (FWI) is an optimization process of fitting observed and modeled data to reconstruct high-resolution subsurface physical models. In acoustic FWI (AFWI), pressure data acquired using a marine streamer has mainly been used to reconstruct the subsurface P-wave velocity models. With recent advances in marine seismic-acquisition techniques, acquiring multi-component data in marine environments have become increasingly common. Thus, AFWI strategies must be developed to effectively use marine multi-component data. Herein, we proposed an AFWI strategy using horizontal and vertical particle-acceleration data. By analyzing the modeled acoustic data and conducting sensitivity kernel analysis, we first investigated the characteristics of each data component using AFWI. Common-shot gathers show that direct, diving, and reflection waves appearing in the pressure data are separated in each component of the particle-acceleration data. Sensitivity kernel analyses show that the horizontal particle-acceleration wavefields typically contribute to the recovery of the long-wavelength structures in the shallow part of the model, and the vertical particle-acceleration wavefields are generally required to reconstruct long- and short-wavelength structures in the deep parts and over the whole area of a given model. Finally, we present a sequential-inversion strategy for using the particle-acceleration wavefields. We believe that this approach can be used to reconstruct a reasonable P-wave velocity model, even when the pressure data is not available.

전력기기의 고조파 발생원인과 영향 및 측정

  • Kim, Eung-Sang
    • Electric Engineers Magazine
    • /
    • v.230 no.10
    • /
    • pp.22-29
    • /
    • 2001
  • 변압기에서의 고조파의 영향은 두 부분이 있다. 고조파 전류는 동손과 Stay flux 손실을 증가시키는 원인이 되고 고조파 전압은 철손을 증가시킨다. 포괄적으로 순수한 정현파 동작에 비해서 변압기를 과열시킨다.

  • PDF

Acoustic Nonlinearity of Surface Wave and Experimental Verification of Characteristics (표면파의 음향 비선형성과 실험적 특성 검증)

  • Lee, Jae-Ik;Kwon, Goo-Do;Lee, Tae-Hun;Jhang, Kyung-Young
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.29 no.4
    • /
    • pp.344-350
    • /
    • 2009
  • The goal of this study is to introduce the theoretical background of acoustic nonlinearity in surface wave and to verify its characteristics by experiments. It has been known by theory that the nonlinear parameter of surface wave is proportional to the ratio of $2^{nd}$ harmonic amplitude and the power of primary component in the propagated surface wave, as like as in bulk waves. In this paper, in order to verify this characteristics we constructed a measurement system using contact angle beam transducers and measured the nonlinear parameter of surface wave in an Aluminum 6061 alloy block specimen while changing the distance of wave propagation and the input amplitude. We also considered the effect of frequency-dependent attenuation to the measurement of nonlinear parameter. Results showed good agreement with the theoretical expectation that the nonlinear parameter should be independent on the input amplitude and linearly dependent on the input amplitude and the $2^{nd}$ harmonic amplitude is linearly dependant on the propagation distance.