• 한국주조공학회지
• /
• 제29권2호
• /
• pp.59-63
• /
• 2009

Effects of Ti on damping capacity and mechanical properties are investigated in hot rolled Fe-17%Mn alloy. The existing damping alloy with Fe-Mn binary system was limited the use by high production cost, however in case of using scrap iron instead of pure iron although the content of carbon is higher it is possible to be applied wider field especially construction items because the production cost is lower. However, the excellent specific damping capacity is dropped due to the high content of carbon, we developed advanced type of damping alloy included Ti. TiC is formed with added Ti and it holds the specific damping capacity similar to existing damping alloy. The effect of Ti on damping capacity is found to be beneficial in carbon-containing alloy, which is attributed to the depletion of carbon solute due to the formation of TiC.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1124-1132
• /
• 2000

Viscoplastic response and densification behaviors of Ti-6AI-4V powder compacts under uniaxial compression are studied at room and high temperatures with various initial relative densities and strain rates. The yield function and strain-hardening law proposed by Kim and co-workers were implemented into a finite element program (ABAQUS) to compare experimental data with finite element calculations for porous Ti6A14V powder compacts. Displacement-relative density, displacement-load relations and deformed geometry of Ti-A14V powder compacts were compared with finite element results. Density distributions in Ti-6AI-4V powder compacts were also measured and compared with finite element results.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.284-291
• /
• 2013

Micro cutting of titanium alloy by polycrystalline diamond (PCD) tools was studied. Micro electro discharge machining (MEDM) was used to fabricate customized micro shaping tools from PCD blank. The tool was used to machine micro grooves on Ti alloy and the effects of depth of cut and machining length on tool wear, burr and surface roughness were studied. The shaping tool has cutting edge of a few ${\mu}m$. The crater size of the tool surface was increased with increasing capacitance of EDM machining conditions, which was used to control the surface roughness of the machined micro grooves.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.56-56
• /
• 2014

티타늄-알루미늄-질화물(TiAlN)은 고능률 절삭 분야에 사용되는 공구의 수명 향상을 위한 표면처리 소재로 많이 이용되고 있다. 음극 아크로 코팅할 경우, 거대 입자가 박막 표면에 존재하여 박막의 품질을 저하시킨다. 본 연구에서는 공구의 수명을 향상시키는 TiAlN 박막을 TiAl 합금 타겟을 이용하여 형성하였으며, 거대입자의 생성을 줄일 수 기판 청정공정을 도출하였다. 그리고 따른 박막표면을 관찰하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.21-21
• /
• 1999

파괴인성의 정량적 평가는 균열이 내재할 수 있는 구조물의 설계 및 사용중 건전성 확보를 위하여 필요하다. 파괴인성의 측정은 광탄성법, 코스틱법 및 모아레법 등에 의하여 주로 평가되고 있으나 고가의 장비가 필요하고 실험으로 구현하는데 어려움이 있기 때문에, 실험이 비교적 간단하고 신뢰성이 있는 스트레인 게이지법에 관한 연구가 최근에 이루어지고 있다. 본 연구는 항공기나 로켓의 추진기용 구조재로 사용되는 마레이징강과 티타늄 합금을 이용하여 파괴인성시험을 수행하였다. 균열선단의 변형률장은 Westergaard 응력 함수를 사용한 다중변수해로 표현하였고, 스트레인게이지에서 얻은 변형률을 대입하여 파괴인성치를 산출하였다. 스트레인게이지법에 의한 파괴인성치는 ASTM E399의 규정에 의한 실험결과들과 비교하여 그 유용성을 제시하였다.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.96-103
• /
• 2011

Rotor grip is used as a component of rotor system in unmanned helicopter. Instead of usual machining, hot forging process has been considered to improve its proof stress against repeated loading conditions and crash in the farm-field. Die design and forming analysis have been performed according to the conditions such as billet volume, flash, cavity filling, and the distribution of damage during the forming by using FE analysis. In the results of analysis, the possibility of structural failure in the model has not been found because its maximum effective stress is much lower than yield strength of the titanium alloy. In the forging die design, flash has been allowed because of low production in the industrial field. Preform design was studied by using FE-analysis, and its optimal dimension was obtained in the hot forging of rotor grip with titanium alloy.

• 소성∙가공
• /
• 제28권3호
• /
• pp.130-134
• /
• 2019

Electrically assisted (EA) springback reduction of grade 2 titanium alloys is demonstrated through u-bending experiments. A single pulse of electric current having a short duration of less than 0.5 sec is applied to a specimen during u-bending. The effect of the electric current condition on the resultant springback is then evaluated. The experimental result shows that the springback of the selected grade 2 titanium alloy could almost be eliminated through application of electric current with a duration less than 0.5 sec prior to unloading. Lastly, an exemplary industrial application of EA springback control is presented.

• 대한치과기공학회지
• /
• 제23권1호
• /
• pp.9-19
• /
• 2001

Microstructure and phase transformation of Ti-Ni-Cu alloy powders produced by using attrition milling method were studied. Mixed powders of Ti-(50-X)Ni-XCu ($X=0{\sim}20$ at%) in composition range were mechanically alloyed for maximum 20 hours by using SUS 1/4" ball in argon atmosphere. Ball to powder ratio was 50: 1 and impeller speed was 350rpm. Mechanically alloyed with attrition millimg method. powder was heat treated at the temperature up to $850^{\circ}C$ for 1 hour in the $10^{-6}$ torr vacuum. Ti-Ni-Cu alloy powders have been fabricated by attrition milling method. and then phase transformation behaviours and microstructual properties of the alloy powders were investigated to assist in improving the the high damping capacity of Ti-Ni-Cu shape memory alloy powders. The results obtained are as follows: 1. After heat treating of fully mechanically alloyed powder at $850^{\circ}C$ for 1hour. most of the B2 and B 19' phases was formed and $TiNi_3$ were coexisted. 2. The B 19' martensite were formed in Ti-Ni-Cu alloy powders whose Cu-content is less than 5a/o. where as the B19 martensite in those whose Cu-content is more than 10at%. 3. The powders of as-milled Ti-Ni-Cu alloys whose Cu-contents is less than 5at% are amorphous. whereas those of as-milled Ti-Ni-Cu alloys whose Cu-content is more than 10at% are crystalline. This means that Cu addition tends to suppress amorphization of Ti-Ni alloy powders.

• 한국재료학회지
• /
• 제25권8호
• /
• pp.403-409
• /
• 2015

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructure and diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and the diffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific lattice relationship. The modulated structure may be induced by short distance slip or atom movement during a very short interval of solution treated and quenched (STQ) materials. The athermal ${\omega}$ phase, which could be precipitated at low temperature aging, is also analysed by the metastable phase. The metastable phases including athermal ${\omega}$ phase had a common characteristic of hardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atom movement at the metastable state.