• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.82-94
• /
• 2008

Airport GIS is a comprehensive information system to improve security and efficiency of airport. At the initial stage to make it real, the current status of domestic and international regulations along with relevant standardization bas been reviewed. Gimpo Airport becomes a test-bed to get some ideas about how to bring the airport GIS into workflow by building service model and basic design based on current status and demand analysis of the airport. The 6 service models primarily brought into the project are as follows: (1) Local vehicles safety management in airside, (2) Intelligent traffic control between flights and vehicles at main cross points, (3) Dynamic safety management against FOD in airside and breakage on pavement, (4) Special support vehicle management such as deicing remotely controlled, (5) Response and support for fire vehicles and ambulances of signatory institutions in emergency. The upcoming research topic aims at drawing a specific design and building integrated system in the future.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.918-919
• /
• 2011

본 논문에서는 특수차량용 발전기 시스템에 적용되는 3.5kW급 매입형 영구자석 동기발전기의 설계 및 특성해석에 대해 나타내었다. 본 연구에서는 DC전원의 전압을 280[V], 발전기 측에서 발생하는 선간전압을 293.2[V]로 설정하여 설계하였다. 정격속도 2,000[rpm]에서 정상 구동하는 발전기를 목표로2차원 유한요소해석을 통하여 속도별 역기전력과 정격에서의 전압, 전류, 출력에 대해 실험값과 비교 검증하였고, 약계자 제어를 통해 각 속도 영역에서 일정전압이 유기됨을 실험을 통해 검증하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.29-38
• /
• 1997

In this paper, brake steering performance of electric-driven special-purpose vehicles is investigated. A 14 DOF model is developed considering nonlinear character- istics of the suspension and tire. Based on the model, cornering performance is analyzed for brake steering, acceleration steering and pivoting, respectively. Simulation results are obtained based on the developed SIMULINK module. This analysis about the non steady state cornering performance is particularly important for armored vehicles because the projected route of the vehicle at emergency should be predicted accuracy.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.841-843
• /
• 1999

This paper presents a design of stabilization controller for combat vehicle. A Stabilization system reject disturbances while vehicle moving. The conventional stabilization controller used to constant gain. We can improve the aiming performance by appropriate controller gain. We can find the proper controller gain for road frequencies by evolution strategy(ES). The relationship between the frequencies and proper control gains are generalized by use of the neural network. The road frequency estimated by wavelet transform of disturbance signal. The simulation result show that proposed controller is superior to the conventional stabilization controller.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.848-849
• /
• 2015

This paper presents the structure design for optimizing output power density and efficiency to develop a spoke-type interior permanent magnet synchronous generator (IPMSG). To obtain the optimal structure, the combination of response surface method (RSM) and 2-D finite element analysis can solve the problem effectively for reducing the volume of permanent magnets (PMs) and maximizing the ratio between power density and efficiency. The effectiveness of this proposed structure design is verified by the simulation and experiment according to the comparison of the electromagnetic characteristics between the initial and modified structure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.54-61
• /
• 2014

This paper proposes a boost/flux-weakening controller (BFWC) for wide speed operation range having engine and interior permanent magnet synchronous generator (IPMSG) for special equipment vehicle. The proposed BFWC exploits direct torque/flux control (DTFC) scheme based on space vector modulation method to control the constant DC voltage output within the entire speed operation range of engine. And, to improve the response characteristics of maximum torque per ampere (MTPA) operation and flux-weakening operation, the MTPA and flux-weakening feed-forward controllers are applied. To estimate feasibility and usefulness of the proposed controller, the simulation and experimental results are compared.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.1-8
• /
• 1982

선진제국의 자동차회사들은 미래의 자동차 또는 특수차량에 이용될 수 있는 가능한 동력 원(powerplant)을 개발하기 위하여 막대한 투자와 인력을 들여 끊임없이 조사와 연구를 계속하고 있다. 이는 보다 성능이 우수한 동려원의 개발에서 비롯되며 근대에 와서는 보편적으로 자동 차에 사용되고 있는 gasoline 및 diesel연료에 의한 내연기관의 문제점(특히 공해와 석유자원의 한계 및 경제성)을 해결코저 그 연구가 다양해지고 있으며 절박한 필요성을 느끼고 있다. 이 분야에 관해 미국 GM사가 연구개발하고 있는 개략을 보면, - Unconnvertional system으로 Turbine, steam, electric, free poston 및 hybrid - Direct coeversion & muclear power system 으로 Thermoelectric power, thermionic power, electrogasdynamics, radioisotope heat source 및 nuclear rector system 등 기초과학분야로부터 응용에 이르기까지 광법위한 연구를 하고 있다. 다음에 본호에서는 unconventional system중 몇가지 project background 그 개요을 소개코저 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.437-440
• /
• 2012

In this paper, we developed the landfill bringing management system which can help to manage a landfill efficiently. Basically We made efforts to standardize it's system architecture but also considered it's localization to adapt An-sung Landfill's special requirements. We used RFID and LPR systems to distinguish a garbage truck from the others, and could establish more reliable landfill management system with this information.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.239-244
• /
• 1999

고분자전해질 연료전지는 다른 형태의 연료전지에 비하여 전류밀도가 크고 구조가 간단하며 전해질의 누출이나 손실의 염려가 없어 수송용 무공해 차량의 동력원으로서 아주 적합한 시스템이다. 또한 빠른 시동과 응답특성, 우수한 내구성을 가지고 있고 연료로 수소 이외에도 메탄올이나 천연가스를 개질하여 사용할 수 있다는 장점이 있다 [1, 2]. 고분자전해질 연료전지는 원래 우주선, 군사용 등 특수 목적으로 사용되던 것이 1980년대 말에 이르러 도심지 대기오염을 저감시키기 위한 전기 자동차의 동력원 및 이동용 전원으로 사용될 것이 기대됨에 따라 전세계적으로 다시 연구 개발의 활기를 찾게 되었다.(중략)

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.372-384
• /
• 2014

DTV field tests have been performed to measure field strength and to check reception ratio on indoor and outdoor sites. They use an antenna of 9m to measure DTV signal in case of outdoor measurement on the road. Modern skyscrapers require the analysis of vertical-directional wave propagation by measuring vertical-directional DTV signal. Even if the field strength is above the reception threshold of $43dB{\mu}V/m$, the reception is impossible in case of strong multi-path or high impulse noise. So, vertical-directional field measurement is essential in environment of tall buildings. In this paper, we developed an octo type multi-copter to measure vertical-directional DTV signal level. A compact and portable DTV signal level meter, an antenna, a microwave transmitter for data transmission, and a recording equipment are equipped in the multi-copter. Three different sites are selected to test the measurement system. Developed measurement system using the multi-copter is very useful in measuring vertical-directional DTV signal, especially in apartments, non-accessible area by vehicles, and forbidden areas.