• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.48-52
• /
• 1990

최근 우리나라에서도 지진으로 인한 재해를 최소한으로 감소 또는 방지하기 위하여 일반 건축 구조물의 내진설계를 의무화 하도록 규정하고 있다. 그러나 지진하중에 대한 지반-말뚝-구조물 시스템의 내진해석과 설계는 아직도 완전하게 정립되지 못한 실정이며, 지금까지 우리나라에서 원자력발전소, 해양구조물 등과 같은 특수 구조물과 몇몇 고층건물을 제외한 대부분의 일반 건축물에 대한 말뚝의 설계도 지반의 동적특성을 제대롤 반영하지 않는 정적해석이 수행되고 있다. 그렇지만 정적하중과 지진하중의 하중특성은 근본적인 차이가 있으므로 이에 대한 설계를 추가하여야 한다. 따라서 본 고에서는 깊은 기초의 내진설계에 적용하기 위해 이제까지 연구발표된 여러가지 내진해석방법을 간략하게 소개하고 이를 비교, 검토함으로써 동적특성을 어느정도 반영하는 실용적인 설계법을 제시하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.573-583
• /
• 2009

심부암반에 건설되는 지하공동의 형상과 규모는 지질구조, 암반조건 및 건설방법 (굴착, 보 강)에 따라 변화될 수 있으므로 이전에 사용해오던 공동의 크기와 형상을 그대로 답습하는 관행을 탈피하고 지하공동이 갖고 있는 특수한 용도와 목적에 따라 대형화, 심부화 추세로 가고 있는 지하공동의 설계개념을 수립하여야 한다.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.394-406
• /
• 2019

Difficult ground conditions (e.g., fault zone and mixed grounds) are highly probable to appear in subsea and urban tunnels because of the shallow working depth and alluvial characteristics. TBM usually experienced decrease of penetration rate and increase of downtime when it meets these difficult ground conditions. The problems are usually caused by the adverse geological conditions, and it is preferable to determine the optimal operational parameters of TBM based on the previous operational data obtained while excavating a preceding tunnel. This study carried out for efficient TBM excavation in fault zone and mixed grounds. TBM excavation data from the tunnel site in Singapore and the characteristics of the TBM excavation data was analyzed. The key operational parameters (i.e., thrust, torque, and RPM), penetration rate, and downtime were highly influenced by the presence of fault zones and mixed grounds, and the features was discussed. It is expected that the results and main discussions will be useful information for future tunneling projects in similar geological conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.04a
• /
• pp.47-60
• /
• 1998

It is considered in this paper that the main causes of tunnel collapse during the construction were the insufficiency of data of geotechnical investigations, or their limits due to special ground condition such as its heterogeneity and anisotropy It is thought that safety of ground can be affected by the geological conditions such as presences of discontinuities in good intact rocks, and considered to be necessary that awareness of the conditions of discontinuities in advance is important to apply adequate reinforcement measures. It is also shown that a serious accident had occurred because of the unawareness of the permeable alluvial deposits at the top of the tunnel. And it is shown that the example of application of the results of geotechnical investigation such as face-mapping, pilot boring etc. during tunnel construction, and a serious deformation of tunnel under special geological condition. Therefore, it is strongly recommended to perform an adequate geotechnical investigation to confirm the geotechnical conditons of ground before design, and supplimentary investigation is also needed depending on conditions for safe and econonic construction.

• Korean Architects
• /
• no.5 s.65
• /
• pp.58-60
• /
• 1974

연약지반에 있어서 생석회를 사용한 토질 안정처리 공법중 Pack-Lime 공법에 대하여 기술코자 한다. 본 공법은 생석회를 분말 그대로 투입함으로서 Casing 내의 물과 생석회와의 급격한 수화작용으로 투입과정에서 분말의 비산과 소정양의 투입이 불확실한 흡점을 보강하기 위하여 특수 포장지인 흡수성 포대에 생석회를 넣어 Unit로 만들어 Casing내에 투입하여 연속된 생석회 말뚝을 축조하는 공법이다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.11b
• /
• pp.115-140
• /
• 2002

이암층, 함탄층, 석회암층과 같은 특수지질불량구간에서 터널과 암반사면의 합리적인 시공을 달성하기 위해서는 먼저 대상지질에 대한 지질특성, 암반특성을 정확히 이해하는 것이 필요하며, 지반특성에 적합한 지보대책을 수립하도록 하여야 한다. 본고에서는 전형적인 퇴적암지층으로 알려진 포항지역중 중생대 퇴적암류로부터 신생대 제 3기의 미고결 퇴적암류에 이르는 다양하고 복잡한 지질구조를 이루고 있는 지역에서의 터널 및 암반사면의 시공사례를 통하여 시공중의 제반문제점을 검토하여 이암층에서의 안전하고 합리적인 터널/암반사면의 시공방안에 대하여 고찰하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.247-267
• /
• 2005

이암층 역암층 그리고 화산암층과 같은 특수지질 불량구간에서 터널과 암반사면의 합리적인 시공을 달성하기 위해서는 먼저 대상지질에 대한 지질조건과 암반특성을 정확히 이해하는 것이 필요하며, 이를 바탕으로 지반특성에 적합한 보강대책을 수립하도록 하여야 한다. 본 고에서는 포항지역과 경주지역에서의 미고결 이암 및 역암층 그리고 제주도 화산암층에서의 암반 구조물에 대한 설계 및 시공사례를 검토하고 전형적인 미고결 지층으로 알려진 신생대 지층에서의 터널과 암반과 같은 암반구조물에 대한 설계 및 시공상의 제반 문제점을 고찰하므로서 이에 대한 합리적인 대책을 수립하고자 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.5-10
• /
• 2006

A special finite difference method for nonlinear dynamic response analysis of semi-infinite foundation soil using mapping which transforms semi-infinite domain into finite domain is presented here. For the region of engineering interest, mapping is isometric, and fur far field, shrink mapping which transforms infinite interval into finite interval is adopted. At first, the responses of semi-infinite foundation soil with linear constituting model are computed, and compared with theoretical results and those of existing method. Good agreements are obtained among the results of the proposed method, Lamb's theory and FEM with extensive mesh model. Then the responses of infinite foundation soil are computed by the present method, using small and large mesh model. The results of small and large mesh models agree well with each other, demonstrating the effectiveness of the proposed method.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.9
• /
• pp.43-49
• /
• 2018

Seismic hazard assessments are performed on a variety of infrastructure projects. One component of a seismic hazard assessment is the attenuation relationship. Several attenuation relationships have been developed over the decades to predict peak ground acceleration under a variety of site conditions. For example, many attenuation relationships were designed to estimate peak ground acceleration, as well as other intensity measures, under a variety of soil conditions, mostly using the average shear wave velocity for the upper 30 m of earth material as a classification scheme. However, certain types of infrastructure, such as tunnels and nuclear power plants, are typically founded on and in bedrock. Using data from Japan, we developed a simple correlation to estimate peak ground acceleration for rock sites and compare the results from another popular attenuation relationship. Results indicate the popular attenuation relationship to be less than the proposed model for distances less than 200 km.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.139-151
• /
• 1998

SI anchor means the soil improvement anchor. The ground for supporting anchor is improved by JSP, and as a result, SI anchor body has about 80cm in diameter. SI anchor shows high pullout resistance by the frictional force between anchor body and ground, and the bearing capacity of anchor body. Especially the frictional force increases very much with increasing diameter of anchor body improved by JBP. In this study, model and field tests are made to analyse the mechanism of pullout resistance of SI anchor. Through model tests for the SI anchor in air dried sandy ground, strain fields of ground around SI anchor surface are analysed by a photo analysis method using the latex membrane on the wall of soil tank. The results of field tests are analysed by the strains measured by 10 strain gages attached on the inner wall of specially designed PVC pipe embedded in anchor body, and the strains of anchor body are also measured in the model tests.