• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.25-33
• /
• 2002

Most national highways are paved with asphalt. Since increased traffic volume and high temperature have reduced the service life of pavements, modified asphalt pavements or stone mastic asphalt (SMA) have gradually been adopted. However, pavement engineers have difficulty to select pavement types due to lack of standard specifications for these new pavement types. In this study, service lives of general asphalt pavements based on traffic volume were analyzed using the inventory data of pavement management system (PMS) collected for last 10 years. The results showed 9.5 and 5.6 year average service lives for new constructed pavements and overlays, respectively. The traffic volumes for the design life of 10 years was presented based on confidence levels using service life distributions of current pavements. For the confidence level of 90%, 2,300 ESAL was obtained; 1,500 ESAL for the confidence level of 80%. This indicates that modified asphalt pavements should be considered for sections with the higher traffic volume.

• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.177-180
• /
• 2004

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.282-288
• /
• 2023

In this study, we analyzed the amount of roadside fine dust generated from newly constructed specially modified asphalt pavement and general asphalt pavement from existing roads. We collected the 1,000 g (100 g/day) of dust samples from the roadside of the express bus terminal and commercial facility area in Chungcheongnam-do's C site at three-day intervals during the summer of 2022 and 2023. The collected samples were separated from fine dust according to size in the 75-150 ㎛ range and, were separated only from Tire and Road Wear Particles through density separation. No.1-3 are general asphalt pavement section as an existing road. Fine dust and Tire and Road Wear Particles in No.1-3 were 24.27 g, 24.36 g, 0.53 g, and 0.53 g, respectively, and the quantitative results for 2022 and 2023 were similar. On the other hand, No.4-6 are newly constructed specially modified asphalt pavement section. Fine dust decreased by 14.8 % and tire and road wear particles decreased by 29.6 % in 2023 compared to 2022 in No.4-6. In addition, according to the results of thermogravimetric analysis, Tire and road wear particles in No.1-3 are tire and road components at 30 % and 70 %, respectively. And Tire and road wear particles in No.4-6 are tire and road components at 35 % and 65 % in 2023, respectively. From these results, it was confirmed that the newly constructed specially modified asphalt pavement can be effective in reducing roadside fine dust and Tire and Road Wear Particles. However, there may be some shortcomings in conclusive research results due to limited space and sample collection period. In the future, we plan to conduct various case studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.391-399
• /
• 2008

Because of relatively high temperature, over $240^{\circ}C$, of asphalt for steel deck bridge during pavement procedure, the temperature of deck could rise over $100^{\circ}C$ and undesirable excessive displacement and thermal stress could occur. In this study, in order to estimate the thermal effect of pavement process and to find the optimal pavement process, a new thermal analysis technique with Equivalent Heat Source (EHS) is proposed and its applicability to the practical pavement of steel bridge is studied. EHS is developed to simulate the high temperature pavement materials and its thermal effect such as conduction and convection which cannot be explain easily in general structural analysis program for bridge design. To verify the applicability of new analysis technique with EHS, thermal analyses of steel deck bridge with uplift and curved bridge with various pavement procedures are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.653-660
• /
• 2007

Since the temperature of asphalt for deck plate of steel bridge during paying procedure is relatively high as $240^{\circ}C\;to\;260^{\circ}C$, the temperature of deck plate of bridge rises mere than $100^{\circ}C$ and excessive displacement and stress could occur. In order to avoid undesirable failure of base plate and determine the optimal pavement pattern, a thorough thermal analysis is needed. General structural model which is made of beam and plate element should be modified for transient heat transfer analysis; asphalt pavement material and convection effect on surface of structure need to be added. A new technique with the Equivalent Heat Source (EHS) for numerical thermal analysis for steel bridge under thermal load of Guss asphalt pavement is proposed. Since plate/beam elements which were generally used for structural analysis for bridge cannot explain convection effect easily on plate/beam surface, EHS which is determined based on calculated temperature with convection effect is used. To verify the EHS proposed in this study, numerical analyses with plate elements are performed and the results are compared with estimated temperatures. EHS might be used for other thermal analyses of steel bridge such as welding residual stress analysis and bridge fire analysis.

• 보일러설비
• /
• no.12 s.143
• /
• pp.143-150
• /
• 2005

주택외간의 품격을 좌우하는 요소인 지붕에 주로 사용되는 자재는 기와이다. 과거에는 주로 재래식 한식기와가 사용되었지만 지금은 거의 사용되지 않고 양식기와인 스패니시 기와가 보편적으로 사용되고 있다. 그 이유는 외장재로 많이 사용되는 자재들과 가장 잘 어울리기 때문이지만 외벽에 돌이 사용된 경우에는 천연슬레이트가 더 적합하다. 최근에는 컬라아스팔트 슁글이 지붕재로 각광을 받고 있는데 미려한 외관을 만들 뿐만 아니라 방수효과도 뛰어나기 때문이다. 또 한 장두장 이상 겹쳐져 시공되기 때문에 내구성도 강하고, 강인한 글래스매트나 다공성 원지를 심재로 특수개질 아스팔트를 합쳐 채색된 돌입자로 표면을 처리하여 내후성 · 내변색성도 강하다. 무게도 기와의 1/5이 안돼 구조체의 하중부담을 줄여 안정성을 기할 수 있다. 이외의 지붕재로 금속제품, 유리, 태양열 주택의 집열판 등 부분적인 지붕으로 사용되는 것으로가 한때 유행했던 콘크리트 슬라이브 등을 들 수 있다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.181-181
• /
• 2011

도로는 국내 물류를 담당하는 중요한 기반시설로 국내 경제성장의 중추적인 역할을 담당하고 있다. 특히, 1970년대 개통된 경부고속도로는 우리나라의 대동맥으로 산업 성장의 파급효과를 가져오는 기반이 되었고, 공학적인 차원에서도 도로 포장재료를 경험 및 과학적으로 분석하여 적용하는 계기로 도로공학발전의 초석이 되었다. 과거에 적용된 도로 포장재료는 기술자의 경험에 의존하여 배합설계가 진행되었으며, 중차량의 비중이 많은 지역은 강성포장을 적용하고, 상대적으로 중차량이 적은 구간은 연성포장을 적용하는 설계를 따랐다. 하지만, 강성포장을 대표하는 시멘트 콘크리트 포장은 시공상의 복잡함과 시멘트 콘크리트 특성상 강도발현을 위해서 일정기간 이상의 양생일수가 필요하므로, 도로건설의 인프라 구축이 시급한 지역에서는 사용의 제약이 따른다. 연성포장을 대표적하는 재료로는 아스팔트 콘크리트 포장을 들 수 있다. 강성포장보다는 상대적으로 시공상의 편리함과 일정기간의 양생이 필요하지 않아 도로 포장재료로서 그 적용성이 우수하다. 과거에는 아스팔트 콘크리트 포장의 종류가 단순화되어 표층, 기층에 대표되는 몇몇 혼합물이 도로 포장재료로 사용되었다. 도로공학의 학문적 발달과 함께 도로포장의 전반적인 기술이 향상되고 있다. 과거의 도로 기능은 국가 경제발전을 위한 산업용 원자재의 운반이 주요 기능을 담당하고 있는 반면, 국민의 경제적 수준이 증대되고 자가용의 보급이 보편화되면서 도로 이용의 주체가 국민 개개인으로 변화되고 있고, 그 요구조건도 다양화되고 있다. 이에 발맞추어 도로공학의 기술적 향상으로 다양한 기능을 발휘할 수 있는 도로포장재료가 개발되고 있으며, 대표적인 제품으로는 배수성 포장, 반강성 포장, 보수성 포장, 탄성 포장, 저소음 포장 등이 있다. 본 연구에서는 기능성 포장의 하나인 저소음 포장의 특성 중 생산성능을 평가하였다. 생산성능이란 저소음포장을 현장 플랜트에서 생산하였을 경우의 특성을 분석하는 과정으로, 실내 실험으로 최적화된 재료의 배합은 이상적인 조건을 적용하여 결정된 것으로 입고된 현장 골재 및 생산 플랜트 조건에 따른 그 배합 및 물성이 변동을 가져올 수 있다. 특히, 저소음 포장은 기존의 아스팔트 포장과 달리 적용되는 골재, 아스팔트의 재료가 고성능을 발휘하기 위하여 특수한 재료를 적용해야 한다. 배합설계에서도 개립도 아스팔트 혼합물에 적용되는 내구성분석 절차를 따라야 하므로, 실내 배합설계 혼합물과 현장 생산 혼합물간의 물리적 특성에 차이를 나타낼 수 있다. 따라서, 본 연구에서는 실내 및 현장 혼합물의 전반적인 물리적 특성의 차이를 분석하여 저소음 포장의 현장 생산성능을 확인하였다. 분석요소로는 혼합물의 기초물성면에서는 밀도, 공극률을 분석하였으며, 실내 내구성면에서는 마샬안정도, 잔류안정도를 분석하여 실내 및 현장 혼합물의 물성차이를 분석하였다. 기초물성을 평가할 수 있는 밀도와 공극률에서는 생산 현장 혼합물이 실내 혼합물 보다 높은 밀도와 낮은 공극률을 나타내고 있으며, 이에 상관하여 강도특성을 분석할 수 있는 마샬안정도도 생산 현장 혼합물이 다소 높은 강도를 발휘하였다. 또한, 수분에 대한 안정성을 평가하는 인자인 잔류 안정도에서는 실내 및 현장 혼합물 모두 우수한 성능을 발휘하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2010

The rapid economic development induced the massive road constructions, becoming bigger and high-speed of the vehicles. However, it brings lots of social problems, such as air pollutions, traffic noise and vibration. Special concrete block for the base course of asphalt pavement is needed to decrease traffic noise such as tire's explosive and vehicles sound, applying Helmholtz Resonators theory to asphalt pavement. If it is applied to the area where it happens considerable noise such as a junction, the street of a housing complex and a residential street, it is one of considerable method to solve the social requirements of noise problem. This research examines couple of laboratory tests for the sound absorption effect of the concrete block and the base concrete block. There are specimens which is fixed hall-size, space, depth as the condition of this research, and these are analysed of noise decrease effect using different condition of the first noise of each vehicle. As a result of analysis data according to vehicle noise volume, measurement distance, a form and size of the hall using the base concrete block, the use of special concrete base showed a good alternative solution for decreasing traffic noise level, from 4 dB to 9 dB.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.587-597
• /
• 2010

When a car accident occurs, people who had an accident are not free from civil and criminal issues so that the accident investigator should reenact and analyze the accident situation accurately. In addition, the obtained documents through the analysis of such car accident occurrence and related factors have to be used to carry out the improvement of the areas that has numerous car accidents and complementary actions. The vehicle speed, accelerating force, braking power are currently known as the most affecting factors in accordance with many car accidents, traffic facilities, road design, etc. The vehicle's performance and rode friction coefficient road surface friction coefficient are affecting the most closely in this field. Especially, once the estimate of the speed of the accident moment relating to main eleven articles of Traffic Accident Exemption Law is very important and accuracy is required. However, currently the researches of these matters have not made exclusively yet in Korea. In this study by reflecting this current situation, until the sudden braking history is found from the car's sudden braking, it estimates accurately the transient brake time and rode friction coefficient by measuring a time of transient brake time through the precision speed detector (Vericom VC2000PC). The analysis of the experimental results calculated the transient brake time and friction coefficient to fit into the purpose of this study in the basis of different kind of various special purpose asphalt pavement and slip-prevention pavement and provided the fundamental data.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.29-37
• /
• 2010

Porous pavements can provide road users with beneficial characteristics such as skid resistance and surface water drainage under rainy condition, and they cause less tire-road noise than conventional hot mix asphalt(HMA) pavements. However, voids of porous pavements are easily clogged by road debris at early stages, which leads to frequent maintenance works. Therefore, this study focused on the way of minimizing void clogging in porous pavements. During mixture design, the quantity of coarse aggregate has been increased to form many straight void conduits (SVCs) in porous HMAs. These SVCs were found to be effective resisting the void clogging problems. Four different porous HMAs(19mm, 13mm, 10mm, and 8mm) were developed and placed on highway roads. Their performances were validated with field tests during the past four years.