본 논문에서는 커넥터의 S-파라미터로 특성임피던스를 계산하고 커넥터의 성능개선을 위해 설계변경을 한다. FEM(Finite Elements Method) 시뮬레이터로 커넥터의 S-파라미터를 계산하고 회로 시뮬레이터에서 동일한 R, L, C 값을 가지는 등가 회로모델을 추출한다. 인덕턴스와 커패시턴스로 특성임피던스를 계산하고 임피던스 부정합 상태를 확인한다. 특성임피던스 공식으로부터 커패시턴스를 증가시켜 임피던스 정합을 유도하고 커패시턴스는 신호선의 평행한 면적을 확장하여 증가시킨다. 결과적으로 반사손실이 약 5 dB 개선되었고 신호선 유효면적의 증가로 임피던스가 감소하여 삽입손실도 개선되었다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.23
no.10
/
pp.1282-1289
/
2019
In order to measure the transfer characteristic(S21) of the impedance transformer, two impedance transformers must be symmetrically connected. However, the transfer characteristic of two symmetrically connected impedance transformers is influenced by the length of the intermediate connection line. This paper theoretically examines closely the length of the intermediate connection line to obtain the accurate transfer characteristic of the impedance transformer. The electrical length of the intermediate connection line for obtaining the accurate transfer characteristic of the 4:1(50-Ω:12.5-Ω) impedance transformer is calculated about 45°. Using the calculated length of the connection line, The λ/4-microstrip impedance transformer is fabricated at 1 GHz to measure the transfer characteristic. The symmetrically connected impedance transformer is measured the reflection characteristic(S11) of -40.64dB and the transfer characteristic(S21) of -0.154dB at 0.980GHz. This value is approximately equal to the theoretical calculated 987MHz center frequency and -0.15dB transfer loss value of the λ/4-microstrip impedance transformer.
Journal of the Institute of Electronics Engineers of Korea TC
/
v.48
no.9
/
pp.47-53
/
2011
The signal transmission properties of the connector such as insertion loss and return loss are investigated using analysis procedure of S-parameter simulation, equivalent model extraction, and characteristic impedance calculation. S-parameter simulation is performed by connector's modeling and solving based on 3-dimensional finite element method. The connector's equivalent model of ${\pi}$ type is are proposed and extracted with an optimization process of circuit analysis simulator. The characteristic impedance of the connector is calculated with results of circuit analysis simulation and S-parameter data. According to the connector's characteristic impedance, it's revised design is carried out. In this work, the connector's effective contact area is increased and its body is applied as a high dielectric material in order to increase its capacitance and then obtain impedance matching. Therefore, return loss of the connector is improved by approximately 10 dB due to its design revision.
Proceedings of the Acoustical Society of Korea Conference
/
1997.06a
/
pp.53-56
/
1997
Tonpilz 압전변환기에 관하여 유한요소법을 사용하여 공기중의 동특성 해석과 수중의 방사임피던스를 해석하였다. 공기중에서 트랜스듀서의 구조를 변화시키면서 입력 어드미턴스 특성과 진동모드를 해석하여 압전변환기를 모델링하였다. 음향 윈도우를 압전변환기 전면에 부착한 후 유한요소법(FEM)에 의하여 매질의 영향을 고려한 입력어드미턴스 특성을 해석하였으며, 또한 방사임피던스 계산 루틴을 추가하여 무한 배플의 경계조건하에서 방사 임피던스를 해석하였다. 공기중과 수중에서의 해석을 통하여 Tonpilz 압전변환기 단일 소자의 구조 변경 및 기계 부재의 추가등에 따라 변동하는 변환기의 특성 및 방사 임피던스를 해석하므로서 평면 배열형 음향 트랜스듀서의 설계에 필요한 파라메터를 구할 수있다.
Proceedings of the Acoustical Society of Korea Conference
/
spring
/
pp.439-442
/
2002
구형 배플을 가진 피스톤 음원에 대한 방사임피던스 특성을 유한요소법과 하이브리드형 무한요소법을 사용하여 수치해석하였다. 강체 구형 배플에 있어서 피스톤 음원의 방사면 크기에 따른 자기방사임피던스 변화와 피스톤 음원간의 상호방사임피던스 변화를 고찰하였다. 방사면의 크기에 따라 자기방사임피던스 변화 및 음원간의 상호방사임피던스 변화를 검토한 결과 알려진 해석해와 일치하였다. 또한, 비강체 구형 배플의 특성 임피던스 변화에 따른 자기방사임피던스 및 음원간의 상호방사임피던스 특성 변화를 고찰하였다.
Proceedings of the Korea Electromagnetic Engineering Society Conference
/
2001.11a
/
pp.275-278
/
2001
TRL 오차 수정방법은 기판 위에 제작된 고주파 소자를 측정할 때 많이 사용되는 방법이지만 오차수정을 위해 제작된 표준 전송선 패턴의 특성 임피던스를 알아야만 보다 정확하게 측정 오차를 수정할 수 있다. 기존의 방법에서는 저항을 종단 처리한 표준 패턴을 추가로 이용하여 전송선의 단위 길이 당 커패시턴스를 계산하고 주파수에 대해 fitting하는 방법으로 표준 전송선의 특성 임피던스를 계산하고 있으나 제작상의 부정확성에 의해 추출된 특성임피던스가 영향을 받고 있음을 확인하였다. 본 연구에서 제안하는 새로운 방법을 이용하면 fitting하는 과정 없이 각각의 측정주파수에서 직접 특성 임피던스 추출이 가능할 뿐 아니라 제작상의 부정확성을 측정결과로부터 처리할 수 있으며 검증 결과 기존 방법 보다 정확한 특성 임피던스를 추출할 수 있었다.
저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.21
no.12
/
pp.2241-2248
/
2017
The coaxial line impedance transformer that performs impedance conversion using the coupling of two or more coaxial lines of the same length is often used for impedance matching in the low frequency region due to many advantages. This paper measures the phase and magnitude characteristics of each coaxial line in a 4:1 coaxial line impedance transformer using two 100mm coaxial lines. This experiment shows that it is more effective to make the length of the auxiliary coaxial line shorter than the main coaxial line by about 5 mm in order to realize a low loss impedance transformer. In addition, it measures the transmission characteristics by directly connecting a 4:1 impedance transformer and a 1:4 impedance transformer. This experiment shows that it is effective to connect a 1pF capacitor between the ground and the outer conductor input point of the main coaxial line in order to increase the operating frequency range.
Proceedings of the Acoustical Society of Korea Conference
/
spring
/
pp.407-410
/
2002
본 논문은 스피커의 후면 방사음을 이용하여 저주파수의 음을 재생하기 위한 인클로져(enclosure) 방식 중 통기구(Vent)를 이용한 위상반전(Bass Reflex) 방식의 스피커 시스템에 관한 것이다. 일반적으로 위상반전형 스피커 시스템의 임피던스 곡선의 특성은 저주파수 대역에서 통기구의 공명에 대한 것과 구동스피커의 공명에 대한 임피던스 봉(mound)이 나타난다. 기존의 연구 결과들은 통기구와 인플로져의 용적에 관련된 최저 주파수에서의 공명에 대한 것만을 대상으로 하였다. 즉, 최저 주파수에서의 공명특성이 상대적으로 높은 주파수에서 나타나는 스피커의 공명특성에 미치는 영향과 이로 인한 스피커의 음파발생 특성에 관하여 구체적인 논의가 되지 않았다. 본 논문에서는 위상반전형 스피커 시스템에서의 두 임피던스 봉오리 사이의 관계를 정리하고, 상대적으로 높은 주파수에서 발생되는 임피던스의 공명 특성에 따른 스피커의 음파발생 특성에 관해 연구하였다.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.296-296
/
2012
펄스 직류 플라즈마 전원 공급시 임피던스 트랜스포머의 유무에 따른 전기적 특성 변화를 연구하였다. 실험 변수는 펄스 직류 전압(350~550 V), 펄스 직류 주파수(100~250 kHz), 리버스 시간(0.4~1.2 ${\mu}sec$.)이었다. 전기적 특성은 주로 오실로스코프를 이용하여 분석하였다. 펄스 직류 전원의 경우 임피던스 트랜스포머의 여부에 상관없이 주파수가 커지거나 리버스 시간이 커지면 peak-to-peak 전압이 증가한다는 사실을 이해하였다. 본 실험은 저진공에서 실시하였다. 임피던스 트랜스포머를 부착하지 않은 경우, GaAs의 식각 속도는 10 sccm BCl3를 사용한 경우 최대 $0.4{\mu}m$까지 얻을 수 있었다. 감광제에 대한 최대 식각 선택비는 약 2.5:1이었다. 또한 식각된 GaAs의 표면은 깨끗하였으며, 염소와 관련된 잔류 물질은 거의 발견되지 않았다. 임피던스 트랜스포머를 설치하면 GaAs의 식각 속도는 증가하였으나 샘플 척에 열 부하가 많았다. 펄스 직류 플라즈마를 이용한 처리장치 개발시 전기적 특성 변화 및 공정 속도 조절에 있어 임피던스 트랜스포머의 역할 및 그 특성에 대한 많은 연구가 필요하다는 본 기초 연구를 통해 얻을 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.