• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.437-446
• /
• 2002

In order to reduce the increasing packet loss rates caused by an exponential increase in network traffic, the IETF (Internet Engineering Task Force) is considering the deployment of active queue management techniques such as RED (Random Early Detection). While active queue management in routers and gateways can potentially reduce packet loss rates in the Internet, this paper has demonstrated the inherent weakness of current techniques and shows that they are ineffective in preventing high loss rates. The inherent problem with these queue management algorithms is that they all use static parameter setting. So, in case where these parameters do not match the requirement of the network load, the performance of these algorithms can approach that of a traditional Drop-tail. In this paper, in order to solve this problem, a new active queue management algorithm called ARED (Active RED) is proposed. ARED computes the parameter based on our heuristic method. This algorithm can effectively reduce packet loss while maintaining high link utilizations.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.4
• /
• pp.115-124
• /
• 2014

Since it costs a lot to build a home network system of new service provider, the entry barrier is quite high. If it would be possible to build a home network system with high performance at a low building cost, it would be quite attractive. If a home network would be built in P2P-SIP(Peer to peer - Session Initiation Protocol) structure, it is possible to decrease server maintenance cost and keep high usability by deconcentrating the traffic concentrated on the server. It is also possible to efficiently manage the location information of terminal, if quorum system based on fuzzy logic would be applied. In this paper we propose the P2P-SIP structure applied of quorum system based on fuzzy logic by which a home network system can be built at low cost. It was possible to know by comparing the structure with existing one that the structure has very good performance.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.501-511
• /
• 1996

Typical integrated service digital network(ISDN) switching systems have several shortcomings including cumulated long call set-up delay and difficulty in higher speed packet communication. The problems come from the nature of X.25 packet swiching technique used in the systems. In this thesis, to solve the above problems, the use of frame relay service within the TDX-10 ISDN switching system is proposed and a frame handling susbsystem(FHS) is designed in order to support the high speed frame relay service in the TDX-10 switching systems. In the proposed TDX-10 architecture, the 64 Kbps packet communication can be executed more ef- ficiently and high speed packet communication is allowed. To measure theperformance characteristics of the proposed systemand to compare the performance with that of the proposed system is superior to that of the existion system and to compare the performance with that of the proposed system is superior to that of the existing system. The proposed switching system offers a seamless evolutionalry path from Narrowband-ISDNto Broadband-ISDNsince itallows anefficient channelutilization and speed packet communication.

• The Korean Journal of Applied Statistics
• /
• v.26 no.2
• /
• pp.291-305
• /
• 2013

Collective traffic data (BPS, PPS etc.) for detection against the distributed denial of service attack on network is the time sequencing big data. The algorithm to detect the change point in the big data should be accurate and exceed in detection time and detection capability. In this work, the sliding window and discretization method is used to detect the change point in the big data, and propose five nonparametric test statistics using empirical distribution functions and ranks. With various distribution functions and their parameters, the detection time and capability including the detection delay time and the detection ratio for five test methods are explored and discussed via monte carlo simulation and illustrative examples.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.65-72
• /
• 2003

In this paper, the new scheme using a Combined Cache(CC) that combing the Paging and Routing Cache(PRC) and an alternative handoff method according to the type of data transmission for achieving the efficient realtime communication. The PRC and quasi-soft handoff method reduce the path duplication. But they increase the network traffic load because of the handoff state packet of Mobile Host(MH). Moreover the use the same handoff method without differentiating the type of transmission data. Those problems are solved by operating U with a semi-soft handoff method for realtime data transmission and with a hard handoff method for non-realtime data transmission. As a result or simulation a better performance is obtained because of the reduction of the number of control packet in case that the number of cells are below 20. And the packet arrival time and loss of packet decreased significantly for realtime data transmission.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.369-375
• /
• 2009

Residential broadband networks (RBN) are quickly evolving from xDSL/Cable networks to FTTH services with lOOMbps bandwidth. With the high-speed Internet services, subscribers tend to use web, multimedia, game or file sharing applications. Therefore, performance of RBN is important to the quality of services for users. Typically, Internet service providers (ISPs) are providing their RBN performance results that are measured by subscribers with the dedicated measurement tools. However, they do not make their results public to people. In order to obtain the performance results measured by users, we have to induce a lot of subscribers, which will take a lot of cost and time. Monarch, that is used in this paper, could provide the 3rd party measurement method without the help of ISPs and subscribers. With the extensive experiments through Monarch, we have shown that 3rd party measurement results are not much different from those of user-initiated measurement. In addition, we have observed that bandwidth is around $80{\sim}90Mbps$ and RTT is less than 30ms in FTTH services provided by three major Korean ISPs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.468-471
• /
• 2010

MOST150, which has a higher bandwidth than of MOST25, appears to satisfy the demand for the automotive infotainment system and to increase the multimedia processing capacity, and the various technology applications are required for the accomplishment of MOST150 development. The MOST25 network technology is being restrictively equipped with some of the car models but the problems with bandwidth and compatibility has arisen. In order to solve this, the MOST150 technology has been developed and further research is being carried out to apply the technology to the automobile industry. Thus, for the effective process of the Ethernet traffic in the realization of MOST150/Ethernet Gateway for automobile, we, in the research, shall analyse the Management Mapping method, including the MOST150's Isochronous channel, the MOST Ethernet Packet channel, and etc. and study the efficient algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.80-91
• /
• 2002

A general goal of the AT%(Asynchronous Transfer Mode) network is to support connect across various network. On ATM networks, ABR services are provided using the remained ban after allocation CBR and VBR traffic. Realtime services such as transmitting audio or video data may be provided using CBR ado VBR which have a constrained transmission delay, but in these cases, the communications bandwidth may be wasted. In this paper a simulation has been performed to compare and evaluate the performance between the ERICA(Explicit Rate Indicate Avoidance) and EPRCA(Enhanced Proportional Rate Control Algorithm) switches which use Explicit Rate switch algorithm for ABR switch. The variation of the ACR at the source end system, the queue length, the utilization rate of the link bandwidth and the share fairness at the transient and steady states are used as the evaluation criteria for the simulation. As a result of simulation, ERICA algorithm switch was ten times long compared to ERPCA switch to achieve assigned fair share. so EPRCA switch is superior to ERICA about load response. For Fair share and stability, ERICA switch is excellent to EPRCA switch.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.279-286
• /
• 2018

Recently, a safety control platform to monitor the safety of train operation in real time and prevent accidents and risks through control is under study. In the initial design, DDS communication method supporting distributed network is adopted for real-time processing of large amount of data according to the integration of existing distributed safety data. However, communication between server and console inside the safety control platform is applied to existing TCP socket communication. In the case of TCP socket communication, it is possible to process data for a small system of a safety control test bed by one-to-one communication. However, if the data is expanded all over the country in the future, it becomes difficult to cope with a case where communication traffic occurs due to vast amount of data. In this paper, we propose DDS communication method to support distributed network between server and console of security control platform, and demonstrate TCP socket and DDS method, and compare throughput and speed. As a result, we have found that the scalability and flexibility are improved in case of applying DDS communication to future systems.

• Informatization Policy
• /
• v.25 no.4
• /
• pp.108-120
• /
• 2018

With the rise of the Fourth Industrial Revolution and I-Korea 4.0, both of which pursue strategies for industrial innovation and for the solution to social problems, the real estate industry needs to change in order to make effective use of available space in smart environments. The implementation of smart spaces is a promising solution for this. The smart space is defined as a good use of space, whether it be a home, office, or retail store, within a smart environment. To enhance the use of smart spaces, efficient decision-making and well-timed and accurate interaction are required. This paper proposes a smart space based on platform which takes advantage of emerging technologies for the efficient storage, processing, analysis, and utilization of big data. The platform is composed of six layers - collection, transfer, storage, service, application, and management - and offers three service frameworks: activity-based, market-based, and policy-based. Based on these smart space services, decision-makers, consumers, clients, and social network participants can make better decisions, respond more quickly, exhibit greater innovation, and develop stronger competitive advantages.