• Laser Solutions
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2002

• Laser Solutions
• /
• v.6 no.3
• /
• pp.1-10
• /
• 2003

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.73-75
• /
• 2004

The purpose of this study is to optimize Nd:YAG laser welding parameters to seaz a Rf source into a Ti micro capsule. Ti tube ends can be sealed as some length of ぉbe end is melted and coalesced. The exact control of the melted length is the most important to get sound sealing. The Nozzle type, tube rotating speed, tilt angle, focal position, pumping voltage, pulse frequency and pulse width were selected as the Nd:YAG laser welding Parameters. These Parameters were optimized by the Taguchi experimental method using 115 orthogonal array. Appearance and cross section of the seated tube ends were examined by SEM.

• The Science & Technology
• /
• no.1 s.404
• /
• pp.12-13
• /
• 2003

미생물 조작 새로운 생명체 창조/ 병을 따지 않고도 포도주 맛 감지/ 나노튜브를 분자 단위로 용접/ 초전도체의 원자 구조 영상/ 다이아몬드 칩 제조 방법 개발/ 쥐 유전자 99%가 인간과 비슷/ 목성의 위성 아말데아에 많은 구멍/ 의대에서 살아있는 동물 실험 줄어든다

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.05a
• /
• pp.45-48
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.306-311
• /
• 1996

CANFLEX 연료봉 다발을 구성하는 우라늄 펠릿이 장전된 핵연료봉의 공기중 진동특성을 진동 실험과 유한요소 해석을 통하여 구하였다. 유한요소 해석 시에는 우라늄 펠릿의 강성은 무시하고 질량은 지르칼로이 튜브에 부가하며, 연료봉 양단의 용접부위를 단순 지지보로 처리하는 모델을 제시하였다. 이 모델로부터 얻은 해석결과를 진동실험에서 구한 측정값과 비교하였다.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.11a
• /
• pp.41-44
• /
• 2002

• Journal of Welding and Joining
• /
• v.27 no.2
• /
• pp.63-68
• /
• 2009

Microminiature heat exchanger has been applied to the gas turbine in order to increase energy efficiency. During the production of microminiature heat exchanger, however, it is very difficult to weld tube to tubesheet. In this study, therefore, welding process of resistance ring projection was used, and weld tensile tests were performed. Sound weld joint was obtained as a result of applying resistance ring projection welding to microminiature heat exchanger to tubesheet. Cold weld occurred at under 1600A. Even though tensile strength was increased with increasing current, splash occurred and tensile strength decreased at 2000A due to the excessive current. Therefore it was determine that the optimal current is 1900A. As result of tensile tests based on ASME code for tube to tubesheet weldment, rupture position was weldment due to Fs(Fractured section) of nugget, which was smaller than tube thickness (t), and it was proven as a partial strength welding because of the average joint efficiency fr = 0.90.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.96-96
• /
• 2010

Magnesium alloy is being used for structural material since it has high specific strength. Tubular shape was effective way for enhanced structural design. To manufacture the tube, it is necessary to weld the butted joint of both tubular formed sides. But the magnesium alloy was hardly welded with conventional welding processes. The laser welding was effective way to joint magnesium alloys because it had high weld strength and productivity compare with other welding processes. In this study, magnesium alloy sheets was formed at elevated temperature to tubular shape and welded with laser. Consequently, the magnesium alloy tube was making successful with warm forming and laser welding and bicycle frame was making with it.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.45-50
• /
• 2001

Open rack vaporizer (ORV) has been used in liquefied natural gas (LNG) receiving terminal in order to vaporize LNG into natural gas (NG) by heat exchange with seawater The U-type ORV which had been operated with seawater for 14 years is one of the important utilities of the gas production and the weld part of tube connected with header_ pipe had experienced many corrosion problems. To elucidate the cause of corrosion at weld part of vaporizer tube, corrosion potentials were compared by parts. This study concerns on the measurement of corrosion pit depth using non-destructive method and the evaluation of stress distribution in an aspect of safety with finite element analysis. In order to confirm the reliability of galvanic corrosion between weld parts and base metal, the measurement of corrosion potential by parts was conducted for 20 minutes in 3.5$\%$(wt.) NaCl solution. Many non-destructive methods were tried to measure the remaining thickness of vaporizer tube at fields. For general corrosion, tangential radiography test was confirmed as an effective method. In case of a fine corrosion pit, the shape of corrosion pit was reproduced using surface replication method. From collected data, stress distributions were quantitatively evaluated with 2-dimensional finite element method and the diagnostic evaluation on internal pressure of the U-type vaporizer could be made.