• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.278-284
• /
• 1998

This study was performed to evaluate the engineering properties of permeable polymer concrete with Fly Ash and $CaCo_3$. The following conclusions were drawn; 1. The unit weight was in the range of $1,830{\sim}1,932kgf/m^3$, the unit weights of those concrete were decreased 16~20% than that of the normal cement concrete. 2. The highest strength was achieved by fly ash 50% and $CaCo_3$ 50% filled permeable polymer concrete, it was increased 26% by compressive strength, 121% by tensile strength and 275% by bending strength than that of the normal cement concrete, respectively. 3. The ultrasonic pulse velocity was in the range of 2,805~2,904m/s, which was showed about the same compared to that of the normal cement concrete. Fly ash 50% and $CaCo_3$ 50% filled permeable polymer concrete was showed higher pulse velocity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.382-382
• /
• 2018

최근 기후변화 및 도시화로 인해 집중호우와 도시 내의 불투수층이 증가하고 있으며, 현재 도심의 강우관리시스템이 한계에 달하여 수재해 피해가 급증하고 있다. 이와 같은 문제를 해결하기 위한 방안으로 저영향개발 기법이 대두되고 있으며, 본 기법은 해당 지역의 강우를 분산식 빗물처리 하여 도시 내의 수문학적 특성을 개발이전 상태로 회복 및 유지하는 기술이다. 저영향개발 기법의 종류는 투수성 포장, 옥상녹화, 빗물정원, 식생저류지, 식생화분 등이 있다. 본 연구에서는 저영향개발 기법 중 하나인 투수성 아스팔트에 대한 우수저감 효과를 분석하기 위해 경상남도 양산시 부산대학교 양산캠퍼스 그린인프라 저영향개발 센터에서 주차장형 LID 시설의 투수성 아스팔트 포장과 대조군인 불투수 콘크리트 포장을 실험대상으로 선정하였다. 포장체는 $10.85m(L){\times}2.3m(B){\times}0.9 m(H)$의 크기로 원지반 침투가 없는 박스형 실험시설로써 이동형 강우모의장치를 이용하여 인공강우실험을 실시하였다. 강우모의 시에 발생하는 지표유출 및 침투유출은 각 유공관을 통해 모니터링 박스에 차집되어 실시간으로 웹사이트 상에 저장된다. 저장된 자료를 이용하여 투수성아스팔트의 첨두유출량 저감, 지체시간지연효과를 분석하였다. 분석된 결과를 통해 첨두유출량은 11%저감되었고 투수성 아스팔트와 불투수 콘크리트는 각각 3시간, 1시간 동안 유출되어 2시간의 차이를 보여준다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.9-17
• /
• 2019

Cement hydrates and the related characteristics change with ages, and the behaviors are much related with chloride diffusion. In this work, 30% replacement ratio with FA(Fly Ash) and GGBFS(Ground Granulated Blast Furnace Slag) are considered for concrete with three levels of W/B (Water to Binder ratio) and 2 years of curing period. Chloride diffusion coefficients from accelerated condition are obtained at 5 measurement period (28days, 56days, 180days, 365days, and 730days), and the results are compared with porosity, binding capacity, and permeability from program-DUCOM. The similar changing pattern between chloride diffusion and permeability is observed since permeability is proportional to the square of porosity. Curing period is grouped into 4 periods and the changing ratios are investigated. Cement hydrate characteristics such as porosity, permeability, and diffusion coefficient are dominantly changed at the early ages (28~56 days), and diffusion coefficient in OPC concrete with low W/B continuously changes to 180days.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.37-42
• /
• 2011

In this study, it is analyzed that mechanical properties and required strength of porous concrete according to the mixing ratio of cement, fine aggregate, and water/cement ratio in order to evaluate mechanical properties of porous concrete using recycled asphalt aggregate. Recycled asphalt aggregates of 13 mm were used without modification of aggregate grading to extend porous concrete application. The water/concrete ratio was poor mix and the range of compressive strength was 18.2 to 19.5 MPa. The average value of permeability showed 8.0E-02 cm/sec.

• 레미콘
• /
• s.77
• /
• pp.12-21
• /
• 2003

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.2
• /
• pp.17-20
• /
• 2007

In this study, a series of uniaxial unconfined compression test and constant-head test were performed to investigate the mechanical characteristics of porous concrete using recycled-aggregate for the varying unit weight and water-cement ratio. To enhance the permeability of the porous concrete, the recycled-aggregate with similar grain size in the range of $40{\pm}5mm$ was used and water-cement ratio that leads to the lean-mix was adapted. The mechanical characteristics of the porous concrete cured for 3 days were examined; the compressive strength and $E_{50}$ showed their maximum values with 40% water-cement ratio and $1.8t/m^3$ unit weight and the permeability coefficient was averagely measured in the range of $0.9{\times}10^0cm/sec$ regardless of water-cement ratio and unit weight.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.265-268
• /
• 2003

댐(dam)의 기초지반에 시공되는 그라우트 커텐(grout curtain)은 댐 축조 후 기초지반을 통한 침투류를 차단하기 위하여 시행되며, 콘크리트 댐, 흙 댐, 사력 댐 등의 공학적 차이에 따라서 그 시공 위치 및 심도, 폭 등이 다르게 적용된다. 그라우트 커텐(grout curtain)의 설계ㆍ시공 요소는 기초지반의 투수성, 댐 내의 수심, 제체 성토재료의 투수성, 그라우트 커텐의 투수성 등에 의하여 결정되며, 설계 시공 요소들은 그라우팅 커텐의 길이, 폭, 투수도 등이다. (중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.211-220
• /
• 2005

The concrete structure is being considered for the main engineered barrier of low and intermediate level radwaste disposal facility. Concrete of low permeability can minimize infiltration of water and effectively prevent release of nuclide to ecosystem. But if concrete degrades, structural stability of disposal structure will decrease while permeability increase, resulting in increased possibility of nuclide release due to water infiltration. Therefore disposal concrete structure degradation shall be minimized to maintain capacity of nuclide isolation. The typical causes of concrete structure degradation are sulfide attack, reinforcement corrosion due to chloride attack, leaching of calcium hydroxide, alkali-aggregate reaction and repeated freezing-thawing. The common cause of these degradation processes is infiltration of water or adverse chemicals into concrete. Based on the study of these degradation characteristics and mechanisms of concrete structure, the methodology of design and service life evaluation of concrete structure as an engineered barrier are reviewed to ensure its long-term durability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.83-91
• /
• 2015

Porous concrete consists of cement, water and coarse aggregate and has been used for the purpose of decreasing the earth environmental load such as air and water permeability, sound absorption, etc. However, the physical and mechanical properties of porous concrete changes due to compaction load during construction. For such a reason, the purpose of this study is to investigate the physical and mechanical properties of porous concrete according to the kinds of binder, the ratio of water to binder and target void ratio. In particular, this study has been carried out to investigate the influence of compaction load on the void ratio, strength and coefficient of permeability. Aggregate used in this study are by-products generated during production of crushed gravel with a maximum size of 13mm. The results of this study showed that the target void ratio, the coefficient of permeability and compressive strength of porous concrete had a close relationship with the void ratio, and it will be possible that the void ratio is suggested by the mix design of porous concrete. The compressive strength of porous concrete was the highest at the content of the expansive admixture of 5% and compared to non-mixture, 10% mixture of silica fume improved compressive strength about 32%. And in the result of the study to change the compaction load, the compressive strength increased from the load of 15kN, the void ratio decreased from the load of 0.8kN, the coefficient of permeability decreased from the load 35kN, respectively.

• Cement
• /
• s.190
• /
• pp.21-31
• /
• 2011