• Journal of the Society of Disaster Information
• /
• v.11 no.3
• /
• pp.318-328
• /
• 2015

Effective urban flood reduction and restoration of natural water cycle at present include the application of permeable pavements. The application of permeable pavement addresses urban water cycle and disaster related events which gained attention internationally. However, few researches have been conducted to investigate unsaturated behavior and evaluate the water characteristics curves of these type of pavement materials most especially in the unsaturated state. In this study, first the saturated permeability and the soil-water characteristics curve of a pervious concrete are evaluated based on laboratory tests, and, based on experimental results, the infiltration of permeable pavement system is numerically modelled. In the soil-water characteristics curve of a pervious concrete, the volumetric water content drops very steeply after the air entry value with increasing matric suction. From the finite element analyses, the performance of the permeable pavement when compared to impermeable pavement, confirmed that the whole system effectively delayed and reduced runoff.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2009

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.415-424
• /
• 2010

A prototype of a Concrete-Faced Rock-fill Dam (CFRD) was constructed to evaluate the behavior of the materials in each zone within the dam. The tested materials, selected based on their grain size distribution, were used in constructing the prototype dam with layers of variable thickness, settlement ratio, and water content. We investigated the suitability of various values of hydraulic conductivity, water content, dry unit weight, and settlement ratio for zones within the dam. The test results revealed the relationships between the number of passes and the dry unit weight, between the dry unit weight and the settlement ratio, and between the settlement ratio and the number of passes. This paper focuses on the relationship between hydraulic conductivity and the number of passes. The results of the present analysis could be used to establish reasonable compaction standards for materials used in dam construction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.247-256
• /
• 2012

The purpose of this study is to decide the permeability and the rate of flow in a way of both site investigation and backward analysis and the most reasonable numerical analysis by performing a seepage model test for measuring the deformation swept volume of the embankment body in order to review a stability of the sea dyke being composed of multi-layers depending on variation of infiltration. As a result of the review, it could be forecasted that sweeping loss would be taken place at the boundary between bed protection works and embankment materials of the sea dyke due to a permeability difference of the multi-layered bed foundation structures and the sea dyke deformation would be occurred as a result thereby. As result of a numerical analysis for the seepage model test, it could be observed that critical velocity method was found to be smaller than the numerical analysis value but its tendency was similar and therefore it was judged that this method could be applied for the actual cross section.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.2
• /
• pp.57-64
• /
• 2013

In this paper, in order to solve high water content of water sludge and promote its recycle, sludge mixtures with various mixing ratios were produced. Sludge mixture consisted of water sludge and weathered granite soil. Their physical properties and unsaturated characteristics (soil-water characteristic curve, and unsaturated permeability function) were investigated by laboratory tests. Experimental test results indicated that at a given matric suction volumetric water content of sludge mixture increased as water sludge content increased. Air entry values of sludge mixture increased from 0.9 kPa to 2.4 kPa with an increase in water sludge content or fine content. In addition, unsaturated permeability function, which is an important factor for performing infiltration analysis, was predicted using saturated permeability and soil-water characteristic curve of sludge mixture.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.189-202
• /
• 2002

In this study we carried out the in situ test in order to explore the grouting effects of fracture zone on mechanical properties and permeability in tunnel. After consolidation grouting the rock mass averaged 2.30 in the modulus of deformation and 2.49 in the modulus of elasticity. The results obtained through this study are as follows. (1) With advance of the injection steps, the total cement take shows uniformity of the rock mass. (2) After consolidation grouting the improvement of permeability can be identified by reduction of Lugeon values. (3) Grouting injection can improve deformability and strength of rock mass. (4) More mechanical improvement appears for more deformable rock mass before grouting injection.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.57-64
• /
• 1997

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.149-154
• /
• 2005

최근에 이르러 농촌 인구의 도시유입으로 도시의 주거공간이 절대적으로 부족해지고 있으며, 이는 대도시의 아파트 가격 상승을 유발하는 등 부수적인 사회/경제적 문제를 일으키고 있다. 정부나 지방자치단체에서는 이러한 문제를 해결하기 위하여 대규모의 신도시 개발계획을 추진하고 있으며, 이러한 신도시 개발은 도시화로 인하여 환경적, 수문학적으로 부정적인 영향을 미치는 것으로 조사되고 있다. 도시화는 수문학적으로 산림이나 농경지와 같은 투수지역을 건물, 도로 등의 불투수지역으로 변화시키는 것이며 (Im 등, 2003), 이로 인하여 홍수파의 도달시간이 줄어들고 첨두유량이 증가하는 등의 수문변화를 수반하게 된다. 도로나 건물 등이 대부분을 차지하고 있는 도시지역에서는 지표면이나 식생으로부터 대기중으로 방출되는 증발산량이 농촌이나 산림지역보다 상대적으로 적으며, 강우시 토양중의 침투량과 지표면의 저류량도 도시지역에서는 매우 적게 나타난다. 신도시 개발 전후의 수문순환을 평가하는 방법 중의 하나는 개발예정지에 대한 장$\cdot$단기의 수문/수질 관측을 통하여 개발 전과 개발 후의 유출특성과 수질부하를 정량적으로 비교하는 것이다. 본 연구에서는 도시화로 인하여 대규모의 토지이용 변화가 예상되는 신도시 개발예정지구를 시험유역으로 선정하여 장기적인 수문/수질 모니터링을 실시하고자 한다. 또한, 시험유역에서 계측된 자료와 유역수문모형을 활용하여 개발전후의 홍수 및 유출특성을 분석하고 도시화가 하천의 수문 및 수질에 미치는 영향을 정량적으로 비교분석 함으로써 효율적인 저감 대책의 수립에 활용할 계획이다. 본 연구에서는 국내$\cdot$외의 시험유역의 운영 실태를 조사하고, 신도시 개발 등으로 인하여 급격한 도시화가 진행되고 있는 지구를 시험유역으로 선정하여 유역의 물순환 체계를 조사하고자 한다. 이를 위하여 신도시 개발지구와 도시정비사업지구를 대상후보지로 선정하여 개발계획 및 유역의 특성 등을 조사하고, 시험유역의 선정기준을 수립하여 연구의 목적과 부합되는 지구를 시험유역으로 선정하였으며 선정된 시험유역에 대하여 수문$\cdot$수질 조사 계획을 수립하고, 계측시설을 설치하여 시험운영을 실시하고, 향후 시험유역의 수문계측 및 관리방안을 수립하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5157-5164
• /
• 2010

Currently about 3.2 millon tons of waste lime are accumulated and annually 100,000 tons are producted. This study was carried out to investigate the characteristics of soil mixed with waste lime for reusing of roadbed embanking material. Waste lime used in this study is producted as a by-product in the manufacturing process of making $Na_2CO_3$ from local chemical factory in Incheon. In this study, the feasible reuse of waste lime mixed with granite weathered soil, clay, crushed rock was investigated through laboratory tests including specific gravity test, sieve analysis, hydrometer analysis, atterberg limit test, compaction test, unconfined compressive test, CBR test, permeability test, shear test, and abrasion test. The mixing rate is granite weathered soil, clay, crushed rock 80 % respectively and waste lime 20 % by weight. From the test results, it is shown that the waste lime and soil mixtures satisfy the criteria as road embanking material specification.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.5-13
• /
• 2012

This research have investigated the application and the injection effect of the alkaline silicasol grouting materia (which is) recently developed. To compare the engineering characteristics of the alkaline silicasol which is formed with 3D-gel and the sodium silicate, it have studied the strength and environmental effects through the laboratory test, and field application was investigated with a review of the injection effect and waterproof through the field test. As a result of the laboratory test, unconfined compression strength of alkaline silicasol was 5 times more than sodium silicate. As a result of the leaching test, a total amount of the eluviated elements was very small, it considered the environment-friendly material. As a result of the field test, considerable reduction of the coefficient of permeability at the hydraulic layer was confirmed, and it could secure that the coefficient of permeability showed a lower than standard value of $10^{-5}cm/sec$.