• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.428-435
• /
• 1994

Properties of modified rice starches prepared in drum drying and extrusion were evaluated to use for effective utilization. Blue value was the lowest (p<0.05) for waxy rice starch and L value was decreased after modification of starches. Water solubility index was the highest for modified starches prepared in extrusion, while water absorption index was the highest for modified starches prepared in drum drying. Cold-Water-Solubility was the highest (p<0.05) for modified rice starch prepared in drum drying (RD). Consistency index of RD was drastically increased as shear rate increased and yield stress was the highest for RD. Results of Gel Permeation Chromatography showed that starch components were broken down into lower molecular weight materials and amylose are degraded by modification. Changes in the X-ray diffrectometry pattern indicated the transformation of granule into an amorphous state during modification and illustrated V-type.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.403-407
• /
• 1995

For the use of starch gel like Mook(a Korean traditional gel food), the physicochemical properties and gelatinization patterns of defatted high amylose corn starch were investigated. The crude and total lipid contents of starch decreased by defatting from 0.07%, 0.92% to 0.03%, 0.19%, respectively. But iodine affinity increased from 51.6% to 71.3%. Water binding capacity of starches increased from 104.6% to 117.3% after defatting. Soluble carbohydrate and leached amylose of untreated and defatted starches were increased rapidly above $110^{\circ}C$. The apparent viscosity of starch dispersion using alkali solution increased above 0.3N NaOH solution but the transmittance increased above 0.4 N NaOH. The DSC thermograms of both starches showed broad and double endotherm with relatively low enthalpy, but the second peak of endotherm was larger in defatted starch than in untreated starch.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.44.4-45
• /
• 2009

과학기술위성 3호의 주탑재체인 MIRIS (Multi-purpose InfraRed Imaging System) 적외선우주관측카메라의 인증모델이 조립을 마치고 현재 성능시험이 진행 중이다. MIRIS 적외선광학계는 구경 80mm의 광시야(f/2) 굴절식 망원경으로서, 총 5매의 렌즈로 구성되어 있다. 렌즈들은 S-FPL53, S-TIH6, Fused Silica 등의 재료를 사용해 가공되었으며, MIRIS 관측 파장대역($0.9\sim2.0{\mu}m$)에서 투과율이 극대화되도록 반사억제 코팅이 적용되었다. MIRIS 광학계 및 광기계부 설계에 있어서의 주요 고려사항은, 1) 상온에서 조립된 상태에서 발사 시 위성체가 받는 충격과 진동을 견뎌낼 것, 그리고 2) 발사 후 위성 궤도상에서의 복사냉각을 통해 180K로 열수축된 상태에서 최적의 광학성능을 발휘할 것 등이다. 이러한 설계 개념을 바탕으로 MIRIS 광학계를 제작하였으며, 조립된 인증모델은 진동시험 및 열진공시험을 통과하였다. 이 발표에서는 MIRIS 적외선우주관측카메라 광학계의 인증모델 제작 과정과 부품별 시험, 그리고 조립 후 상온 및 저온성능시험 결과에 대하여 논의 한다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.97-105
• /
• 1994

To investigate the characteristic and the cause of the yellow water zones in the estuary of keum River, physico-chemical measurement and analyses were made on seawater samples collected from 18 stations in May, July, august, October in 1992, and February in 1993 respectively. The yellow water zones were recorded as grade 9 on the forel water color meter and appeared consistently at the stations 1, 2, 3, 4, 5, 7, 8, 9, 13, 14, 15 and 17 through out the year. The organically polluted matter gradually increased in the study area. The nutrient concentrations of inner waters of water zones were higher than that of the surrounding waters and were over red tide criteria levels. But abnormal aggregation of phytoplanktons could not occur because of lack of light and high current velocity. In Conclusion, this yellowish colored water zone was caused not by abnormal aggregation of phytoplanktons but by inorganic matters such as sand or soil particles, $85\%$ of which consisted of suspended solids.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.180-184
• /
• 1989

Clarification of the juice extracted from stored Fuji apples was studied with pectolytic enzyme and pH control, separately and in combinations. In the separated treatment, the clarity of the juice was increased with the treated enzyme amount. The juice adjusted pH to 3.5 with malic acid had the highest clarity in pH range from 3.5 to 5.0, but this juice was not acceptable because of high acidity. In combination of the two treatment, the clarity of the juice treated with the enzyme at pH 4.0 was higher than that of the juice without the enzyme, and the juice with ligh trasmittance of about 92% could be obtained at the pH by addition with one-third amount of enzyme which was used for clarification of the juice extracted from the fresh apples at harvesting season.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.656-662
• /
• 2013

The flexible patterned cover film was made by a simple solution coating process using polymethyl methacrylate (PMMA) solution with glass beads. The effect of patterned cover film on the efficiency of solar cell has been investigated. It was found that the relative solar cell efficiency increased up to 3.4% with the incident light angle between $0-90^{\circ}$ by the sphere shape of glass bead coated on the film surface. This was understood that the loss of transmittance and scattering due to the light directional dependency on solar cell were minimized because the light entered glass beads normal to its surface regardless of incident light angle. The maximum relative solar cell efficiency was achieved when glass bead shape on the film is hemisphere and the relative efficiency increased with increasing the amount of glass bead on the film surface. However, too much glass beads on the film surface resulted in the lower relative solar cell efficiency due to the lowering of transmittance as well as the occurring of light interference.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.463-469
• /
• 1999

The potassium lithium niobate $K_3$$Li_2$$Nb_5$$O_{15}$ single crystals were growing in $K_x$$Li_{1-x}$$NbO_3$ (x = 0.4~0.6) chemical formular by the Czorchralski method. Crystal growth is studied in two orientations with growth along a-axis and c-axis. We have subjected this crystal to x-ray diffraction studies and found that they are single-crystalline and belong to tetragonal system with the lattice parameters a = b = 12.577 $\AA$ and c = 3.997$\AA$. The temperature dependence of dielectric constant was measured in the region of the phase transition. Curie temperature and diffuseness of phase transition are influenced by composition concentration. The composition and cation distribution of ferroelectric TB-type niobate crystals has a strong influence on the ferroelectric properties. Growth condition, optical transmittance, etching pattern and dielectric properties are presented and discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.181-181
• /
• 2008

DLC (Diamond-like Carbon) 박막은 높은 내마모성과 낮은 마찰 계수, 화학적 안정성 및 적외선 영역에서의 높은 투과율과 낮은 광 반사도, 높은 전기저항과 낮은 유전율, 전계방출특성 등 여러 가지 장점을 가진 물질이다[1]. 최근에는 DLC 박막의 여러 장점들과 산과 염기 유기용매에 대한 화학적 안정성으로 인하여 인조관절에서 인공심장의 판막에 이르기까지 의공학 관련 부품소재로 응용되고 있으며 내구성과 안정성에 있어서 탁월한 성능을 보여주고 있다. 또한 DLC 박막의 높은 경도와 낮은 마찰 계수, 부드러운 박막 표면 (수nm의 RMS 거칠기)의 장점을 살려 마그네틱 미디어와 하드디스크의 슬라이딩 표면에 사용되어지고, MEMS (Micro-Electro Mechanical System) 소자와 MMAs (Moving Mechanical Assemblies)의 고체윤활코팅으로 활용하여 미세기계의 내구성과 성능 향상을 도모할 수 있다. 이와 같이 DLC 박막은 다양한 분야에 응용되고 있으며, 박막이 지닌 여러 가지 장점들로 인하여 더 많은 분야에 응용될 가능성을 지닌 물질이다. 그러나 수 ${\mu}m$이상의 두께에서 박막이 높은 잔류응력 (residual stress)을 가지고, 열에 취약하여 이의 개선에 관한 연구들이 진행되어 지고 있다 [2]. 따라서 사용되는 목적에 따라 용도에 맞는 양질의 DLC 박막을 합성하기 위해선 합성 장치의 개발과 다양한 실험을 통한 최적의 합성조건 도출 등의 노력이 요구된다. 또한 DLC 박막 합성시의 여러 가지 증착 방법에 따른 박막 물성에 대한 재현성 확보 및 박막 증착에 관한 명확한 메커니즘 규명이 아직까지는 불분명하여 이에 관한 연구가 시급하다. 따라서 본 연구에서는 MEMS 소자와 MMAs의 고체윤활코팅으로 사용가능한 DLC 박막을 RF PECVD (Plasma Enhanced Vapor Deposition) 방식으로 합성하고 후열처리 온도에 따른 DLC 박막의 마찰계수 변화를 박막에 훼손을 주지 않는 FFM (Friction Force Microscopy) 방식을 사용하여 분석하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.333-339
• /
• 2011

In this work, electrochemical characteristics and optical transmittance of carbon nanotubes (CNTs) counter electrodes which had different amount of CNTs in CNTs slurries were analyzed. Two-step heat treatment processes were applied to achieve well-fabricated CNTs electrode. Three sets of CNTs electrodes and dye-sensitized solar cells (DSSCs) with CNTs counter electrodes were prepared. As the amount of CNTs increased, sheet resistance of CNTs electrode decreased. CNTs electrode with low sheet resistance had low electrochemical impedance and fast redox reaction. On the other hand, in case of CNTs counter electrode with low density of CNTs, performance of the dye-sensitized solar cell was improved due to its high optical transmittance. We found that the transmittance of CNTs counter electrode influence the performance of dye-sensitized solar cells.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.370-375
• /
• 2008

High-speed high-resolution terahertz time-domain spectroscopy (THz-TDS) is demonstrated using the asynchronous-opticalsampling (AOS) method. A time-domain signal with a 10-ns time window is rapidly acquired by using two femtosecond lasers with slightly different repetition frequencies to generate and detect a terahertz pulse wave, without a mechanical delay stage. The spectrum obtained by the fast Fourier transformation (FFT) of the time-domain waveform has a frequency resolution of 100 MHz. The time resolution of our spectrometer is measured using the cross-correlation method to be 278 fs. A transmission spectrum of water vapor is measured and the absorption lines are analyzed in the frequency range from 0.1 to 1.2 THz.