• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.93-98
• /
• 1993

In the ternary system of $CaF_2-CaO-P_2O_5$. Apatite$(Ca_{10}(PO_4)_6F_2)$ single crystal having a congruent point was grown by FZ process. The atmospheric condition was kept by oxygen blowing. Adjusting the growth parameters of rotation rate, growth rate and gas amount, we tried to find the optimum growth condition. By partly substituting Ca as Co element, the absorption of infrared is increased and the color effect was observed. Using the Laue back reflection, XRD and FTIR analysis, the characterization of the crystal was carried out.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.175-175
• /
• 2008

투명전극으로 사용되고 있는 Indium tin oxide (ITO) 박막은 전기적 전도도와 기판과의 접확성, 화학적 안정성, 광투과율 등의 특성과 함께 우수한 전기 광학적 거동을 보이고 있다. 그러나 ITO는 고가의 재료이기 때문에 대체 투명전극으로 Al을 도핑한 ZnO 박막의 연구가 활발히 진행되고 있다. ZnO:Al 박막은 chemical vapor deposition, reactive magnetron sputtering, electron-beam evaporation, pulsed laser deposition 등의 당양한 방법을 이용하여 증착하였다. 그러나 최근 낮은 온도에서 대면적의 균일성과 우수한 특성 때문에 atomic layer depositon (ALD) 방법을 이용하여 많은 연구가 진행되고 있으며, 이런 투명전극은 태양전지를 위해 연구되어지고 있다. 따라서 본 연구에서는 ALD 방법으로 Al의 도핑 양을 조절하여, ZnO:Al 박막을 제조하여 그 특성을 평가하고, 또한 ZnO TFT를 제작하여 발표하고자 한다. ZnO와 ZnO:Al 박막은 실리콘과 유리 기판 위에 ALD (Lucida-D200, NCD Technology) 장치로 증착하였다. DEZn, TMA, $H_2O$는 ZnO와 ZnO:Al 박막을 증착하기 위한 전구체와 반응가스로 사용하였다. 증착된 박막은 XRD와 HRTEM을 이용하여 결정구조와 미세구조를 분석하였다. AFM과 4-point probe를 이용하여 증착된 박막의 표면 거칠기와 면저항을 관찰하였다. semiconductor parameter 분석기를 이용하여 제작된 ZnO TFT를 평가하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.161-170
• /
• 2002

A wind tunnel experiment was performed with the design wind speed of 50m/s to investigate the wind forces of Ieodo Ocean Research Station. The structure portion above water surface was modelled with 1/80 scale ratio. The wind force coefficients were determined from the force signals and compared to the results of a numerical study which was separately undertaken. Those results generally agreed well, and it is assured that the experimental data can be effectively used in the wind resistant design of the structure. Making use of the experimental force and pressure coefficients, the wind farce and moments acting on the overall upper structure of prototype are determined together with the wind pressures on local impervious facilities (main deck, solar panel and helideck).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.59.1-59.1
• /
• 2009

레독스 흐름 배터리 (Redox Flow Battery)는 외부의 탱크 등에 저장해 둔 활성물질(이온 가수가 변화는 금속) 의 용액을 펌프로 전해셀에 공급하여 충전 방전하는 배터리로 신재생 에너지인 풍력과 태양광 발전, 야간의 잉여 전력 저장 등 대용량 전력 저장 장치로 관심이 높아지고 있다. 대표적인 레독스 흐름 배터리로 알려진 바나듐 레독스 흐름 배터리는 이온 교환막 사용으로 인하여 전기전도도, 기계적 강도, 투과도 및 전해질 내의 화학적 안정성 등 여러 가지 문제점과 함께 비용 문제점을 야기한다. 하지만 새로운 용해 납 레독스 흐름 배터리는 이온 교환막을 사용하지 않아 바나듐 레독스 흐름 배터리의 문제점 및 시설비가 절약되는 장점이 있어 새로이 연구되지고 있다. 본 연구는 레독스 흐름 배터리에 주로 이용되는 카본 전극재료의 따라 형성되는 Pb, $PbO_2$ 박막의 미세 구조를 및 에너지 효율 특성을 분석하였다. 실험은 half-cell로 이루어졌으며 작업전극은 Carbon felt, Ordered Graphite, Disordered Graphite, Glassy Carbon 등을 여러 카본 재료를 사용하였고, 상대전극은 Pt, 기준전극으로 Ag/AgCl를 사용하여 Cyclic Voltammetry특성과 충방전 특성을 연구하였다. 전해질은 Lead Carbonate ($PbCO_3$)+Methanesulfonic acid ($CH_3SO_3H$) 들어간 수용성 전해질을 교반을 통해 이용하였다. 여러 carbon 전극재료와 생성된 Pb, $PbO_2$ 막의 표면구조, 미세구조, 상들의 변화는 XRD, SEM, EDX, Raman등을 통하여 분석하였으며, 전기화학 공정의 변수와 전극에 따른 에너지 효율특성에 대하여 고찰해 보았다.

• Solar Energy
• /
• v.12 no.2
• /
• pp.18-27
• /
• 1992

Multilayer coatings of $WO_3$ were deposited by the sol-gel technique on microscope slide glass and ITO coated glass. These films were characterized optically, chemically, and structurally by XRD, spectro-photometry, DTA/TGA, SEM/EDAX and RBS. Uniform $WO_3$ sol-gel films were dip coated on slide glass at dipping speed of 5mm/s. This sample indicated a low near IR transmittance in optical properties as a result of coloration using a dilute HCI electrolyte as the $H^+$ion sources. Differential thermal analysis results have allowed the accurate determination of the formation temperature of the $WO_3$ crystalline phase from the gel data in the range of $380^{\circ}C{\sim}500^{\circ}C$, consistent with crystallization temperature of sol-gel film. RBS spectrometry was performed on the uncolored $WO_3$ sol-gel film, yielding a chemical composition of $WO_3$.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.201-205
• /
• 1984

Some physicochemical properties of ginger root (Zingiber officinale) starch were compared with those of cross-linked corn starch. The ginger root starch that contained 23.5% amylose had a water-binding capacity of 99.1% and a B-type X-ray diffraction pattern. The optical transmittance of the ginger root starch suspension increased from $70^{\circ}C$ and showed a similar pattern to cross-linked corn starch. Solubility studies revealed that both ginger root and cross-linked corn starches had low swelling power and solubility in water up to $90^{\circ}C$, and reduced solubility in potassium hydroxide. Brabender amylograph data indicated that the ginger root starch (7%) had a relatively high initial pasting temperature $(81.5^{\circ}C)$ and was stable against heat and mechanical shear, which resembled to the cross-linked corn starch.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.65-67
• /
• 1996

Optical property of tissue is characterized by its high scattering of light. In near infrared range$(800{\sim}1200nm)$ scattering is dominant than absorption. Communication using NIR through tissue is applicable to immplantable device. In this paper, simulation of unit impulse response of light in tissue is carried out to estimate the amplitude, phaselength and phaselength deviation.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.11-14
• /
• 2017

In this paper, we introduce a method of light focusing effect using prism structure to solve optical discontinuity of conventional external signage LED panels. The prims structures were patterned on a transparent polycarbonate substrate with MEMS and femto-second laser process. We have confirmed that the patterned prism structures on the substrate made artificial LED lights on empty space between the panels by light guide effect of the structure. The artificial light's lateral positions were controlled by thickness of polycarbonate substrate. This cost effective prim patterned transparent film can be utilized on digital signage LED panels to achieve good optical communication.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.294-301
• /
• 2016

In this paper, we designed the transparent circuit analog radar absorbing structure using printed metal grid mesh for enhanced optical transmittance. To obtain wideband electromagnetic absorption and enhanced optical transparency at X-band, we proposed the resistive FSS(Frequency Selective Surface) using printed metal mesh pattern on transparent glass with PEC(Perfect Electric Conductor) plane using ITO(Indium Thin Oxide) coating. We then fabricated the proposed structure to verify the simulation results obtained from commercial EM simulator. The comparisons between the simulation and measured results show good agreements. The results also show that the proposed radar absorbing structure can provide wideband reflection as well as better optical transparency. We can apply this proposed structure to the canopy of stealth aircraft and other stealth and security applications for visible transparency.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.507-513
• /
• 2013

Transparent bulletproof windows play an important role in the munitions industry. The thickness of bulletproof windows including soda-lime silicate(SLS) glass, polyvinyl butyral, poly urethane, main defense(200MD), and safety film was reduced from 40mm to 29mm by adjustment of SLS glass laminated array. Borosilicate glasses generally have lower surface density and more excellent mechanical properties than SLS glass. Borosilicate glass was strengthened by ion exchange in the $KNO_3$ powder. The maximum mechanical properties were observed at $550^{\circ}C$ for 10min. The Vickers hardness, fracture toughness and 3-point bending strength of ion exchanged samples were about $775kg/mm^2$, $1.91MPa{\cdot}m^{1/2}$ and 764MPa each, which are about 27%, 149% and 249% higher than parent borosilicate glass, respectively. The penetration depth of K+ ion at $550^{\circ}C$ for 10min was $59.8{\mu}m$. As a result, the transparent bulletproof windows were predicted to be more lightweight by ion exchange of borosilicate glass. If the SLS glass for bulletproof windows is replaced by ion exchanged borosilicate glass, the bulletproof windows can be expected to be lightweight and thinner.