• Journal of the Korean Geotechnical Society
• /
• v.34 no.8
• /
• pp.5-14
• /
• 2018

The grain size of clastic sedimentary rocks classifies the rock types and also causes of anisotropy of the rock. The anisotropy is one of the most important factors that dominates the strength and weathering behavior of rocks. The anisotropy of clastic sedimentary and igneous rocks in the Gyeongsang Basin including Yeongju, Daegu, and Busan were analyzed by magnetic susceptibility expressed by the degree of anisotropy and shape parameter. As the results of the study, the sandstone deposited under lacustrine environment unaffected by the external force shows 1.03 degree of anisotropy. The degrees of anisotropy of the rocks affected by faults and fault rocks show 1.06 and 1.14, respectively. The magnetic susceptibility of rocks is to decrease with the distance from the fault. A fresh mudstone and shale formed by fines show a similar magnitude of the degree of anisotropy to fault rock and correspond to oblate shape parameter due to their sedimentary structure. Due to these reasons, we need attention in design, construction, and maintenance of a structure constructed in mudstone and shale.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.125-125
• /
• 2016

남강 권역은 5개의 단위유역으로 구성되어 있으며, 남강A, 남강B, 남강C, 남강D와 남강E로 명명되고 1단계 수질오염총량관리제도 시행 이후 유역 내 개발 등으로 인한 오염원이 증가하고 장기간 퇴적된 저니층으로부터 오염물질이 용출되는 등 수질의 자정능력보다 더 많은 오염물질이 수체내로 유입됨으로써 수질이 악화되자 수량확보 뿐만 아니라 남강의 수질관리에 대해서 관심을 가지기 시작하였다(GNDI, 2010). 남강 하류수계는 하상구배가 매우 완만하며 유속이 느리다. 따라서 물의 체류시간이 호수와 비슷한 양상을 보이고 있다. 더욱이 남강 하류수계는 주변의 도시와 농경지로부터 물의 소모량이 크기 때문에 하류수계의 물의 흐름이 더욱 완만해지고 이로 인하여 수질 악화가 가속화되고 수역의 영양단계가 점점 증가하는 부영양화현상이 발생되고 있다. 남강하류수계와 같이 부영양화 된 수계내의 미처리 된 영양염을 이용한 식물플랑크톤의 생산에 의해 자생BOD가 공급된다. 따라서 남강댐 하류지역과 같은 수리 수문학적 특징을 가진 유역은 수질관리를 위해서 특정 수역에 유입 BOD와 자생 BOD가 어느 정도 기여하는가를 정량적으로 파악한 후, 기여도에 따라 오염원인 물질을 줄이기 위한 수질관리 방안이 설정되어야 한다. 본 연구에서는 남강유역의 오염원의 기여율 분석을 위해 하천수질모델인 QUALKO2를 사용하였으며, 점오염원 뿐만 아니라 수질에 상당한 영향을 끼치는 비점오염원의 영향을 통합적으로 고려하기 위하여 유역 모델인 SWAT과의 연계방안을 제시하였다. 또한 모델의 연계 적용을 통해 산정된 내부오염원과 내부오염원의 기여율과 수질측정결과를 활용하여 분석한 기여도와의 비교를 수행하여 신뢰성을 확보하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.31-43
• /
• 1989

The paper shows a solution by giving vegetable oil a chemical treatment, i.e., transesterification of the rapeseed oil without any modification of the diesel engine for reducing carbon deposits, and to evaluate rate of combustion with vegetable oils, their esterified fuel and their blend fuels using a double Wiebe's function approximation in a naturally aspired D.I. diesel engine. Since any oil will be as material for ester, if it is fatty acid, the sardine oil was considered. In the experiment, engine performance, exhaust gas emissions, and combustion characteristics were measured and calculated for a number of fuels: rapeseed oil, palm oil, ester of rapeseed oil, and these fuels blended with ethanol or diesel fuel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.376-376
• /
• 2015

거주지나 공장부지와 같은 이용 가능한 토지를 만들기 위하여 해안 지역을 매립하는 토목공사가 전세계 곳곳에서 이루어지고 있다. 매립공사에서 매립토량의 결정은 경제성 부분에서 매우 중요하나 국내는 어항 항만 설계기준(2014)에 의하여 단순히 입경별로 유실율과 유보율을 산정하여결정하고 있는 실정이다. 따라서 본 연구에서는 원형의 매립호안 주변의 유사 거동을 분석하기 위하여 수리실험을 통한 연구를 진행하였다. 수리실험은 길이 13.0 m, 폭 5.0 m, 수위 0.10 m의 직사각형 단면의 개수로에서 수행되었으며, 실험에 사용된 유사는 주문진사($d_{50}=1.0mm$)와 안트사이트($d_{50}=0.44mm$)를 사용하였다. 원형 호안은 방수처리가 되어있는 목재로 제작하였고 두 가지 유사 모두 매립지역에서 형성되는 모래의 형상은 차이를 보였고 일정량의 유사가 호안 하류측에 쌓이는 것으로 나타났다. 선행 연구와 달리 호안에서 형성되는 모래의 이송된 형상을 관측하였다. 향후 모래 유입 위치를 달리하여 퇴적된 모래의 형성을 정량적으로 관측이 가능하다면 매립공사의 경제성을 높일 수 있을 것이라 기대된다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.2
• /
• pp.64-72
• /
• 2004

We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.408-413
• /
• 2018

In this paper, the particle size, bulk density, friction coefficient and angle of repose were measured for the automatic processing of solar salt, which was classified with 5 levels of moisture content (16.5, 13.2, 8.2, 4.9, 3.7%). Average diameter was 1.98~1.60mm according to moisture content, and bulk density increased with increasing moisture content. As a result of measuring the coefficient of dynamic friction, the maximum value was shown in the stainless steel plate according to the material, and ABS plate and acrylic plate were lower in the order. Movement occurred at the moisture content of 8.2% or less, and the empty angle of repose was increased and the filling angle of repose was decreased as the moisture content increased.

• The Korean Journal of Quaternary Research
• /
• v.19 no.1
• /
• pp.1-17
• /
• 2005

This study aims to study the distribution and formation age of Quaternary deposits in the downstream of Yeongsan Estuarine River, encompassing Muan, Illo and Donggang counties. For this purpose the authors examine several borehole data, and step trench survey for excellent profiles was studied in connection with grain size population and magnetic susceptibility. As a result, it is interpreted that the coastal plain of the Yeongsan River was formed by sea level rise after Last Glacial Maximum(LGM). The fore edge/escarpment of coastal terraces distributed 7-10 m asl is assumed to be formed during the last glacial period, while the coastal terraces distributed above 7-10m asl formed during MIS 5a. In addition, the fore edge/escarpment of coastal terraces distributed above 15 m asl is presumed to be have been formed during the stadial of last interglacial period, while the formation age of coastal terraces distributed above 15m(asl) is assumed to be MIS 5e. This formation age can be estimated by the coastal terrace ages of the southeastern coast of Korean Peninsula. The characteristics of Quaternary deposits linked to paleolithic culture will eventually lead to the reconstruction of ecosystem environment of paleolithic peoples.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.747-752
• /
• 2003

This study was carried out to understand the stratigraphy and depositional environment of clayey soils that distributed in the Gadeok-do area, Kimhae plain (Nakdong estuary). For the study, SPT core sampling and magnetic susceptibility analysis were conducted. Soils in study area is classified into five sedimentary facies ascending order; sand/gravel. clay, sand/gravel, clay, interbedded sand and silty clay. Analysis of magnetic susceptibility for Gadeok-do clayey soil reveals that depositional process and environment can be divided into upper, middle and lower layer, and they are closely related to the sea level change since late Quaternary.

• Geotechnical Engineering
• /
• v.6 no.4
• /
• pp.65-74
• /
• 1990

This paper presents triaxial test (CIVC and CKOUC) results on normally consolidated deep sea clay samples. Based on the test results the pore pressure-strain relations for both isotropicaly and anisotropicaly consgidated samples are expressed with hyperbolic functions of the major princpal strain. The analysis of the difference in pore pressure behavior due to the anisotropy in consolidation stress is carried out with the effective stress pathos of CIVC and CKOUC and finds a factor which correlates the pore pressure of two types of test.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.454-456
• /
• 2010

이 논문에서는 PVDF(polyvinylidene fluoride) 필름의 음파에너지를 이용하여 포화된 사질토에서의 탈수율을 증대하기 위한 방법을 연구하였다. 이 방법은 자연배수로 인한 이차적인 환경문제를 수반하는 강 또는 하천 등에 퇴적된 사질토의 탈수를 촉진시키기 위한 방법으로 PVDF필름의 음파에너지를 이용하였다. 이 연구에서는 PVDF필름의 주파수와 전압을 달리하여 사질토 지반에 적용되는 최적 주파수와 전압을 찾아내고 사질토에서 PVDF필름의 탈수능력을 알아보고자 하였다.