• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.408-408
• /
• 1998

교통신호기는 다양한 교통통행에 우선권을 부여하는 교통안전시설물로서, 교통소통과 안전에 지대한 영향을 끼치는 매우 중요한 통제시설이다. 그러나 현행 부적절한 신호기 설치로 차량 교통의 흐름을 방해하거나 교통사고를 증가시키는 경우가 있다. 본 연구는 교통안전시설실무편람에 제세된 9가지 신호기 설치준거 중 보행자 신호기 설치 준거에 대하여 국내도로상황 및 보행자 특성에 맞는 새로운 설치준거를 제시하는데 목적이 있다. 교통운영 측면에서 보면, 보행자 신호기는 보행자가 도로를 횡단하는데 적절한 간격을 찾을 수 없을 때 인위적으로 횡단간격을 만들어 주기 위한 교통제어시설이다. 따라서 보행자가 횡단보도에서 최대로 대기할 수 있는 시간을 기준으로 설치 여부를 결정하는 것으로 가정하고, 보행자가 보도상에서 기다릴 수 있는 최대한도 대기시간은 단일로상의 무신호 횡단보도에 교통신회가 설치되었을 경우 한 주기에서 녹색시간을 감한 시간으로 가정할 수 있다. 무신호 횡단보도 현장조사를 통하여 보행자 횡단행태, 횡단보행속도, 보행자 대기시간 등을 분석하였다. 차량의 간섭에 의한 보행자 회단간격과 차량 교통량과의 관계를 도출하고, 보행자 간섭에 의한 차량 교통량과 보행자 교통량과의 관계를 도출하였다. 결론적으로 차로수별로 차량 교통량과 보행자 교통량 상관관계에 의한 신호기 설치, 설치고려, 미설치 영역을 구분하여 보행자 신호기 설치준거(안)을 제시하였다.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.107-113
• /
• 2007

This research addressed the problem of describing how the operating characteristics of passenger car and large vehicle differ qualitatively and quantitatively through the analysis of field survey data. A formulation that estimates passenger car equivalents used in this paper is derived by microscopic headway method. Regression analysis was used to focus on the effect of vehicle type on intervehicular spacings and the modeling technique for the statistical analysis was detailed.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.321-330
• /
• 2022

Busan New Port manages the largest volume of traffic among Korean ports, and accounts for 68.5% of the total volume of the Busan port. Due to this increase in volume, ultra large container ships call at Busan New Port. When the additional south container terminal as well as ongoing construction project of the west container terminal are completed, various encounters may occur at the Busan New Port entrance, which may cause collision risk.s Thus, the purpose of this study was to provide a plan to improve the safety of vessel traffic, in the in/out bound fairway of Busan New Port. For this purpose, the status of arrivals and departures of vessels in Busan New Port, was examined through maritime traffic flow analysis. Additionally, risk factors and safety measures were identified, by AHP analysis with ship operators of the study area. Also, based on the derived safety measures, scenarios were set using the Environmental Stress model (ES model), and the traffic risk level of each safety measure was identified through simulation. As a result, it is expected that setting the no entry area for one-way traffic would have a significant effect on mitigating risks at the Busan New Port entrance. This study can serve as a basis for preparing safety measures, to improve the navigation of vessels using Busan New Port. If safety measures are prepared in the future, it is necessary to verify the safety by using the traffic volume and flow changes according to the newly-opened berths.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.1-11
• /
• 2010

Traffic broadcasting is using a usual traffic information announcement when giving its information to users on the road and for the provision of information useful to drivers, a clear criteria of how to judge with information from informers needs to be established from the perspective of users. In this study, to give some available criteria for current announcement which often causes confusion, cognitive characteristics were investigated and analyzed based on judgment criteria which are commonly felt by correspondents, participants in traffic broadcasting and drivers. The result requires the provision of information that is relied on an average speed where drivers feel little cognitive difference and found a classification where a smooth traffic flow is more than 60km/h, going slow 40~60km/h and congested state less than 40km/h respectively. And from the study of 35 traffic information announcement for different traffic situations, 8 cases of smooth state and 9 cases of congested state were clearly classified but the rest 18 cases of comment were ambiguously perceived by drivers and which requires the necessity of a announcement that uses directly the word of 'smooth', 'slow', and 'congestion' in the actual expression of slow driving. The future study should be focused on the establishment of more definite criteria by representation of nearly real traffic flow, provision of traffic information announcement and the analysis of cognitive response through car dynamic simulators and the kinds.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.93-99
• /
• 2012

This study analyzes traffic data which are collected by VDS(Vehicle Detection System) to research the relationship between spacing distribution and vehicles' relative speed. The collected data are relative speed between preceding and following vehicles, passing time and speed. They are also classified by lane and direction. For the result of the analysis, in the same platoon, we figure out that mean of spacing is 40m, which can be a value to determine section A to D. To compare spacing according to time interval, this study splits time intervals to peak hour and non-peak hour by peak hour traffic volume. In conclusion, vehicles in peak hour are in car following because most drive similar speed as preceding vehicle and they have relatively small spacing. On the other hand, non-peak hour's spacing between vehicles is bigger than that of peak hour. This implies driver's behaviors that the less spacing, the more aggressive and want to reduce their travel time in peak hour, whereas most drive easily in non-peak hour and recreational trip purpose because of less time pressure.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.241-247
• /
• 2016

As a domestic traffic control signal system, either the system with which a traffic signal turns into green at regular intervals or the system with which an amber or a red signal flickers on local roads without heavy traffic at midnight has been utilized. However, when the former system is used for roads with light traffic at midnight, delays and congestion can be incurred. Besides, in case of the latter signal system, the risk of vehicle crash is high. This study proposes a response type of flickering green signal system that rearranges signal system after analyzing beacon messages including sensor data. The proposed system, on a trunk road or a branch road at midnight, makes the signal keep flickering in green; When a vehicle enters the range of RSE, the transfer coverage, it transmits beacon messages regularly and Agent System analyzes the messages and alters the signal. It is a system by which vehicles move following the altered signal system, which will not only ensure smooth flow but also prevent vehicles from crashing on a road with light traffic. As a result of a simulation, traffic throughput and the average waiting time displayed 10 to 30 percent better improvement than existing signal systems, in terms of performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.22-30
• /
• 2015

Recently ITS have been increasingly applied on the roads to resolve traffic problems. Especially, Variable Message Sign (VMS), which is the one of ITS for traffic management and traffic safety, can be used for providing information about road conditions, climate conditions. In this study, data acquisition and statistical analysis were conducted for estimating safety impacts of providing traffic information through VMS. As a result of analyzing traffic characteristics before and after providing traffic information through VMS, average travel speed was decreased and vehicles tended to drive on centerline of lanes in 1st and 2nd lane after providing traffic information through VMS. Also, in order to analyze safety impacts of provided VMS traffic information, traffic safety hazard zone was established in each lane and probability distributions of passing traffic on the study area was estimated through Anderson-Darling Test. As a result of this, safety impacts of VMS traffic information in 1st lane could, on average, increase in left and right side of the lane by 0.69% and 7.07%, respectively. In case of 2nd lane, safety impacts could, on average, increase in left and right side of the lane by 2.71% and 0.02%, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.24-32
• /
• 2007

Variable message sign (VMS), which is used for providing real-time information on traffic conditions and accident occurrences, is one of the important components of intelligent transportation systems. It is essential that the scheme of VMS message phase and duration should be designed with the consideration of drivers' message reading time that will be depended on various causal factors, such as the amount of VMS messages, drivers' travel speed, and geometric conditions. However, there have been not much efforts to explore the relationships between the drivers' message reading time and the above causal factors. Driving simulator experiments were conducted to obtain drivers' message reading time with respect to the amount of VMS messages, drivers' travel speed, and different geometric conditions. Regression modeling techniques were applied to develop an estimation model for drivers' message reading time. Probabilistic outcomes of the proposed model would be greatly utilized to design proper VMS message phase and duration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.67-80
• /
• 2020

High-speed weigh in motion (HS-WIM) is a real-time unmanned system for measuring the weight of a freight-carrying vehicle while it is in motion without controlling vehicle traffic flow or deceleration. In Korea, HS-WIM systems are installed on the national highways and general national ways for pre-selection by law enforcement. In this study, to improve the measurement accuracy of HS-WIM, we devise improvements to the existing integral and peak weight conversion algorithms, and we provide a new fusion algorithm that can be applied to the mat-type HS-WIM. As a result of analyzing vehicle driving tests at a real site, we confirmed the highest level of weight-measuring accuracy.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.63-74
• /
• 2010

Recently, there has been increasing demand from academic society in Korea for the improvement of current traffic congestion cost estimation methods. The purpose of this study is to suggest a better way to estimate congestion cost followed by in-depth review regarding traffic congestion. The key improvements proposed in this study include: 1) adding social externality to congestion cost, 2) integrating the green house and environmental pollution impacts with congestion costs, 3) taking non-recurrent traffic congestion costs into account for the assessment, 4) revising the criteria to determining the level of traffic congestion speed, and 5) deciding how to limit congestion measurement period. It is found meaningful that the improvements, notwithstanding difficulties in their real case application, provide invaluable insights in our efforts to change the meaning of congestion cost in an era of sustainable growth.