• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.214-215
• /
• 2013

The main criteria for objective measure of the level of transportation service is travel time and delay time. In this paper, the level of service is measured by using moving vehicles method. Through this, we get the hourly traffic volume, the average travel time, space average speed, etc. In addition, we get the density of traffic.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.105-106
• /
• 2014

본 논문에서는 통행 시간의 측정 방법 중 하나인 CCTV를 활용한 주행 차량 조사법을 이용하여 교통량을 측정한다. 교통망의 서비스 수준을 측정하는 주요 기준인 통행 시간과 지체 시간에 대하여 알아본다. 신호등 간격이 넓어서 연속적인 교통류 특성을 갖는 곳에서 측정을 하도록 한다. 반대편의 교통류가 충분히 식별 가능한 구간이어야 하고, 구간의 끝부분에서는 유턴이 가능해야 한다. 이 방법은 측정차량의 운전수만 있으면 CCTV와 프로그램이 알아서 측정하고, 시간, 거리, 교통량을 기록할 수 있는 장비도 필요 없다.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.47-56
• /
• 2008

Two-Lane Highway of Korea is important, Because it has the largeest portion of all roads of Korea. But it has only one lane for one direction. So, If Delays are happened by low-speed vehicles, high-speed vehicles should over-take through the other side of the road. This over-takings can generate the high possibility of traffic accidents and the severity of traffic accidents by over-takings is very high. Because it generates a head-on collision. But the level of Service that indicates the operation states of Two-Lane Highway is defined as a conception that explains the operation conditions of traffic safety etc. Whencalculating the Level of service. It is considered by only delays. So, in this paper, first, this author wants to present the calculation of delay-time by Total-Delay Rate. Second, by multiplying this delay-time by the costs of delays wants to present the method of calulates the total delay costs. Third, to consider the traffic accidents, After predicting the number of traffic accidents, As multipling this by the average of costs of traffic accidents. want to present the method to calculate Total traffic accidents costs. Forth, present the operation costs.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.197-207
• /
• 1998

지능형교통체계(ITS)환경 하에서 요구되는 정보서비스의 기본적인 형태는 통행속도, 지체정도, 통행시간등으로 대별 되어질 수 있다. 그 중 통행시간의 기본적 요소로서 링크통행시간을 산출하기 위한 제반 기법을 소개하였고, 특히 GPS를 이용한 링크통행시간 산정기법을 본 고에서는 제시하였다. 현재 GPS를 장착한 차량이 고유의 목적 (예를 들면, 위치파악 및 배차등의 목적으로)을 위해서 점차 늘어나고 있는 추세인 만큼 (개인택시조합등) 이러한 자원을 부수적으로 이용할 수 없는지에 대한 활용방안의 여부가 논문을 작성하는 계기가 되었다. 이를 위해서 본 고에서는 구체적으로 GPS 원시테이터, 수치도로지도 (GIS포함) 및 무선데이터망을 이용하여 링크 통행시간을 산출하는 기법이 이를 위해서 본 고에서는 구체적으로 제시되었으며, 이들을 통한 교통정보의 수집 가능성을 제안하였다. 중간 결과로서 실제 가로주행조사를 통해서 얻어진 링크통행시간과 본 연구에서 게시된 GPS를 통해 얻어진 링크통행시간과 비교해 보면 오창의 범위가 10%내외로서 판명되어 그나마 동적교통정보 수집조건이 열악한 우리실정에 큰 자원이 될 수 있다는 확신을 얻을 수 ? 있었다. 한편, 본 연구에서 수행되지 못하였으나 추가연구로서 반드시 수행되었으면 하는 몇가지의 항목이 결론부에 함께 제시되었다.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.83-91
• /
• 2012

This study deals with the operational efficiency of roundabout. The roundabouts generally have such the merits as high capacity, delay reduction, safety improvement, and others. Circular intersection can be divided into the rotary and roundabout according to travelling priority. The objective of this study is to comparatively analyze the operational efficiency of rotary and roundabout by scenario. In pursuing the above, this study gives the particular attentions to developing 256 scenarios according to the directional and entering traffic volume and analyzing the delay using VISSIM. The main results are as follows. First, the average delay of rotary was analyzed to be 1.56-8.74 times of roundabout. Second, the operational efficiencies of rotary and roundabout were analyzed to be better in the case of bigger differences in the traffic volumes between the main and minor roads. Third, the average delay of the 4-legged was evaluated to be 1.77-11.70 times of 3-legged intersection. Finally, 2-lane intersection (3-legged & 4-legged) was analyzed to be 2.02-2.23 times of 1-lane intersection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.116-128
• /
• 2020

This study compared the delays of scramble crosswalks and general crosswalks, considering the pedestrian and vehicle traffic at intersections. Based on the signal theory, this study used traffic delays as a measure of feasibility of installing scramble crosswalks. The road structure and length of signal lights were assumed to be specific numbers to calculate the delays in vehicles and pedestrians. With the computed delays, this study compared general crosswalks and scramble crosswalks, and evaluated the feasibility sections on the installation of scramble crosswalks using circular and non-circular signal phases, respectively. The analysis confirmed that the introduction of scramble crosswalks might be more appropriate when the traffic ratio on the main roads is high. In addition, the application of non-circular signal phases is more proper for the operation of scramble crosswalks than circular signal phases. In the non-circular signaling system, however, it was shown that diagonal crosswalks might not be practical if the demand for diagonal crossing is too low. These results are expected to contribute to the development of basic guidelines for assessing the installment feasibility of scramble crosswalks in terms of traffic operation and efficiency.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.671-680
• /
• 2016

This research suggested a new real-time traffic signal control algorithm using fusion data of the travel time and the occupancy rate. This research applied the travel time data of traffic information system to traffic signal operation, and developed the signal control process using the degree of saturation that was estimated from the travel time data. This algorithm estimates a queue length from the travel time based on a deterministic delay model, and includes the process to change from the queue length to the degree of saturation. In addition, this model can calculate the traffic signal timings using fusion data of the travel time and the occupancy rate based on the saturation degree. The micro simulation analysis was conducted for effectiveness evaluation. We checked that the average delay decreased by up to 27 percent. In addition, we checked that this signal control algorithm could respond to a traffic condition of oversaturation and detector breakdown effectively and usefully. This research has important contribution to apply the traffic information system to traffic signal operation sectors.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.181-191
• /
• 2005

This study developed an algorithm for real-time signal control based on the detection system that can collect sectional travel time. The signal control variable is maximum queue length per cycle and this variable has a sectional meaning. When a individual vehicle pass through the detector, we can gather the vehicle ID and the detected time. Therefor we can compute the travel time of an individual vehicle between consecutive detectors. This travel time informations were bisected including the delay and not. We can compute queue withdrawing time using this bisection and the max queue length is computed using the deterministic delay model. The objective function of the real-time signal control aims equalization of queue length for all direction. The distribution of the cycle is made by queue length ratios.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.157-167
• /
• 2009

This study deals with the turn penalty functions in the urban transportation demand forecasting. The objectives are to develop the penalty functions of left-turn traffic in the case of signalized intersections, and to analyze the applicability of the functions to the traffic assignment models. This is based on the background that the existing models can not effectively account for the delays of left-turn traffic which is bigger than that of through traffic. In pursuing the above, this study gives particular attention to developing the penalty functions based on the degrees of saturation by simulation results of Transyt-7F, and analyzing the applicability of the functions by the case study of Cheongju. The major findings are the followings. First, two penalty functions developed according to the degrees of saturation, are evaluated to be all statistically significant. Second, the results that the above functions apply to the Cheongju network, are analyzed to be converging, though the iteration numbers increase. Third, the link volumes forecasted by turn penalty functions are evaluated to be better fitted to the observed data than those by the existing models. Finally, the differences of traffic volumes assigned by two functions, which are exponential and divided forms, are analyzed to be very small.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.233-239
• /
• 2006

Most research for until at now link travel time were research for mean link travel time calculate or estimate which uses the average of the individual vehicle. however, the link travel time distribution is divided caused by with the impact factor which is various traffic condition, signal operation condition and the road conditional etc. preceding study result for link travel time distribution characteristic showed that the patterns of going through traffic were divided up to 2 in the link travel times. therefore, it will be more accurate to divide up the link travel time into the one involving delay and the other without delay, rather than using the average link travel time in terms of assessing the traffic situation. this study is it analyzed transit hour distribution characteristic and a cause using examine to the variables which give an effect at link travel time distribute using simulation program and determinate link travel time distribute ratio estimation model. to assess the distribution of the link travel times, this research develops the regression model and the fuzzy model. the variables that have high level of correlations in both estimation models are the rest time of green ball and the delay vehicles. these variables were used to construct the methods in the estimation models. The comparison of the two estimation models-fuzzy and regression model- showed that fuzzy model out-competed the regression model in terms of reliability and applicability.