• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.29-41
• /
• 2021

The PID controller with fin angle and thrust as control input was designed based on the aerodynamic data of scramjet system. Flight simulation following a given trajectory which strike the target point after climb and cruise with constant dynamic pressure was conducted. After that, the required thrust for the climb and cruise was calculated and the required fuel flow rate for the hydrogen fuel dual mode scramjet combustor was analyzed. The combustor analysis of this study which conducted on integrated model of independently developed inlet, combustor, nozzles and external aerodynamic models, laying the foundation for the integrated design of the air breathing hypersonic system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.2
• /
• pp.9-22
• /
• 2008

This paper presents an integrated optimal design technique of a hybrid structure-damper system for improving the seismic performance of the structure. The proposed technique corresponds to the optimal distribution of the stiffness and dampers. The multi-objective optimization technique is introduced to deal with the optimal design problem of the hybrid system, which is reformulated into the multi-objective optimization problem with a constraint of target reliability in an efficient manner. An illustrative example shows that the proposed technique can provide a set of Pareto optimal solutions embracing the solutions obtained by the conventional sequential design method and single-objective optimization method based on weighted summation scheme. Based on the stiffness and damping capacities, three representative designs are selected among the Pareto optimal solutions and their seismic performances are investigated through the parametric studies on the dynamic characteristics of the seismic events. The comparative results demonstrate that the proposed approach can be efficiently applied to the optimal design problem for improving the seismic performance of the structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.1038-1046
• /
• 2004

In order to acquire high-speed and high-precision performances in servomechanisms, an integrated design method have been proposed. Based on strict mathematical modeling and analysis of system performance according to design and operating parameters, a nonlinear constrained optimization problem including the relevant subsystem parameters of the servomechanism is formulated. Optimum design results of mechanical and electrical parameters are obtained according to the design parameters specified by designers through the integrated design processes. Motors are optimally selected from the servo motor database. Both the geometric errors referring to Abbe offset and the contour errors are minimized while required constraints such as stability conditions and saturated conditions are satisfied. This design methodology both offers the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism and improves the quality of the design process to achieve the required performance for high-speed/precision servomechanisms.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.313-324
• /
• 2007

An irregular cell-based numerical model was developed to analyze underground space flooding. In this model, the flow characteristics in underground space were computed by link-node system. Also, the model can simulate the underground flood flow related to the influence of stairs and wall-structures. Empirical discharge formula were introduced to analyze weir-type flow for shopping mall, and channel-type flow for subway railroad respectively. The simulated results matched in reasonable range compared with the observed depth. The dual-drainage inundation analysis model and the underground space flood analysis model were integrated using visual basic application of ArcGIS system. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.

• Journal of the KSME
• /
• v.32 no.5
• /
• pp.456-464
• /
• 1992

CMM과 CAD/CAM접속(interface)은 1)CMM의 가동률 향상과 자동측정 프로그램 작성의 효율화, 2) 피축정물 측정 기준값의 효율적 작성, 3) CMM의 측정결과의 피드 백에 의한 데이터 해석과 설계시방, 도면의 수정, 4) 설계되지 않은 미지형상의 피측정물을 측정해 CAD/CAM시스템에 의한 모델링과 NC 가공 프로그램의 작성을 주목적으로하여 진행되고 있다. 향후 생산라인 내의 검사 스테이션으로 사용될 수 있도록 CMM 자체의 제약 극복과, 공장자동화를 위한 요소 기술, 기계와의 접속 (interface) 기술개발에 의해 설계, 가공공정에 비해 상대적으로 낙후되어 있는 검사공정의 자동화와 타부문과의 통합화가 촉진될 것으로 전망된다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.75-90
• /
• 1999

이 논문은 전자 부품 조립산업에서의 통합 물류 시스템의 효율적인 선택과 최적의 설계를 위해 객체지향형 전문가 시스템과 해석적 모델을 결합한 방법론을 제시한다. 물류시스템의 선택과 설계 (마이크로로드 AS/)RS 선정)를 위해 지능형 물류시스템 (IMHSS:Intelligent Material Handling and Storage System)을 개발하여, 그 결과를 시뮬레이션 결과와 비교함으로써 지능형 물류시스템 모델의 적합성을 나타내고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1045-1050
• /
• 2010

Fatigue analysis and lifetime evaluation are very important in design procedure for assuring the safety and reliability of rubber components for mechanical systems. Till recently, the technology for the design, analysis, and evaluation of rubber products was required to manufacture rubber products with high quality, fidelity, and reliability. However, in the rubber-manufacturing companies in Korea, the processes of compound mixing, manufacturing of rubber products, and improvement of rubber properties are based on the trial-and-error method and experience. The objectives of this study are to establish methods for testing rubber materials, to develop a database of the properties of rubber materials, to evaluate the performance of rubber components, and to develop a system for predicting fatigue life. A method to predict fatigue-life of rubber components was proposed; in this method, the finite-element analysis and fatigue damage parameter as determined from a fatigue test are incorporated.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2018

A system design and integrated design process for a space launch vehicle were established based on system engineering. With the mission design results for a given payload weight and trajectory, it is possible to perform optimal design by integrating each unit such as propulsion, weight estimation, and aerodynamic force after analysis, during in the system design process. The program is finally configured to verify that the designed vehicle can perform its mission through 3-DOF trajectory optimization simulation. Genetic algorithms are used as the optimization method, and the optimal design results of the variables and parameters to be considered during design are presented.

• IE interfaces
• /
• v.8 no.3
• /
• pp.75-95
• /
• 1995

ISO (International Standard Organization)에서는 산업전반에 걸친 다양한 제품의 설계, 해석, 생산, 그리고 관리에 필요한 모든 제품정보를 정의하는 STEP (Standard for the Exchange of Product model data) 표준을 1983년부터 추진하고 있으나, 이를 지원하는 상용 프로그램들은 아직 초기 단계에 있어 이들을 활용하여 시스템 통합을 구현 할 수 없다. 본 연구에서는 현재 STEP에서 부분적으로 정의되어 있는 현상, 형상 특징, 공차, 프로세스, 그리고 제품 관리 정보 등을 통합하여, CAD, CAPP, 그리고 MRP 시스템 간에 정보를 교환하는 프로토타입을 개발하였다. EXPRESS로 표현된 통합 정보 모델은 STEP의 공통자원에 새로운 엔티티와 속성을 추가하여 구성하였고, IGES 파일 변환기, STEP 파일 에디터, 그리고 데이타베이스 인터페이스를 통하여 통합 정보를 저장하고 교환한다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.20-26
• /
• 1993

본 연구는 CSDP-선체 CAD 시스템 개발'4' 세부과제의 일환으로 수행되었으며 세부과제는 선체 구조 설계 기능을 전산화하기 위한 목표를 설정하고 CSDP 연구사업의 첫해년도부터 지금까지 4년간 수행하였다. 1차년도('88년∼'89년)에는 그 당시까지 단편적으로 개발된 구조설계 프로그 램을 통합하여 살물선 중앙부에 대해 선급규정에 의한 종강도 부재의 배치 및 치수결정 프로그 램을 개발하였다. 2차년도('89년∼'90년)에는 1차년도의 연구결과를 힁부재 및 힁격벽 부재까지 확장하여 살물선 중앙부의 종강도 부재, 힁격벽 부재의 배치 및 치수결정 프로그램을 개발하여 살물선 중앙부의 구조설계를 지원하는 프로그램을 완성하였다. 3차년도('91년∼'92년)에는, 이 중선각 유조선에 대한 관심이 고조되고 있는 바, 동 세부과제에서도 조선소의 요구에 따라 대상 선박을 살물선에서 이중선각 유조선으로 확장하고, 기존의batch방식을 대화식으로 교체하여 선급규정(DnV, L1oyd)에 의한 종강도 부재의 설계 기능과, 간이 해석에 의한 대화식 이중선각 유조선 중앙부의 구조배치 및 치수결정 기능을 갖는 프로그램(ISSMID_T)을 개발하였다. 당해 연도인 4차년도에는, 3차년도까지 개발한 프로그램의 기능, 성능을 보완 확장하였고, 또한 조선 전용 선체 CAD시스템(AUTOKON)과의 Interface도 삼성중공업과 공동으로 개발하였다.