• Title/Summary/Keyword: 통신 냉각 시스템

Search Result 42, Processing Time 0.03 seconds

Experimental Study on the Performance of an Air-Cooling System for Telecommunication Equipment (통신장비용 공냉형 냉각시스템의 성능 특성에 대한 실험적 연구)

  • Jeon, Jong-Ug;Choi, Jong-Min;Heo, Jae-Hyeok;Kim, Yong-Chan
    • Proceedings of the SAREK Conference
    • /
    • 2005.11a
    • /
    • pp.323-328
    • /
    • 2005
  • The objective of this study is to analyze the cooling performance of an air- cooling system for telecommunication equipment. Temperature variation and capacity were measured in an actual unit for telecommunication equipment. In addition, the cooling performance was measured by installing a silicon rubber heater as a heat source in a cabinet. The standard thermal load for telecommunication equipment was approximately 293 W, and the maximum temperature of the heated surface was $64.5^{\circ}C$. The average and maximum temperatures of the heated surface were proportional to the inlet air temperature. When the heat load increased from 293 W to 400 W, the maximum temperature of the heated surface was higher than $64.5^{\circ}C$ even though the inlet air temperature decreased from 25 to $11^{\circ}C$.

  • PDF

Un-Cooled High Efficient Solar Lighting System and its Application (비냉각형 고효율 태양광 채광시스템 및 응용에 관한 연구)

  • Lee, Hoe-Youl;Kim, Myoung-Jin;Shin, Seo-Yong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.11B
    • /
    • pp.1394-1402
    • /
    • 2011
  • This paper describes solar light collecting system which employs parabolic reflector and Fresnel lens and its industrial application. We have introduced second-stage optical system so that it makes optical fiber overcome its numerical aperture limitation and also it makes focused light become collimated, which results in decreased light energy density. As result of these, light collecting efficiency become maximized and the system does not require separate cooling apparatus any more. The developed solar lighting system together with artificial light source like LED has been applied to plant factory as a hybrid lighting source. This makes us save electric energy for artificial lighting during day time. The intensity of LED light in the hybrid lighting system is controlled automatically according to ambient-light-sensor installed in the system so that the light intensity for a plant always keeps the same level no matter how the sun light changes. For a plant factory whose size is 330 square meters, when solar lighting system is applied, 28,080KWh electric energy can be saved per month.2 times.

Gate-Level Power Estimation (게이트 단계에서의 소모전력 예측)

  • 황인기;조준동
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.10A
    • /
    • pp.1737-1745
    • /
    • 2001
  • 최근의 전자업계의 동향을 살펴보면, 휴대 가능한 제품의 요구가 증대되고, 고 집적화 됨에 따라 제품의 크기와 동작속도 뿐만 아니라, 소모하는 전력의 양이 큰 문제로 대두되었다. 더욱이 휴대 장비에서는 전지의 양이 제한되어 있기 때문에, 소모 전력을 줄이는 것은 중요한 문제이다. 휴대 장비가 아니라고 해도, 높은 전력소모를 보이는 제품은 안정된 동작을 위해 값비싼 냉각장치 등을 필요로 한다. 이와 같이 전력소모를 줄이거나 예측할 수 있는 CAD tool에 대한 개발이 시급한 상황이다. 이제까지의 업계의 경향은 물리적 단계의 소모전력을 분석하는 tool의 개발 쪽에 한정되어 있었다. 하지만 이러한 하위 단계에서의 tool은 제품 생산 직전의 단계에서 이루어짐으로, 제품이 원하는 규격에 맞지 않을 경우, 재생산의 비용과 시간의 손실이 크다. 따라서 보다 상위 단계에서의 소모전력 예측 tool의 필요가 증가하고 있다. 본 논문에서는 이러한 기대에 발맞춰 gate 단계에서 소모전력을 예측할 수 있는 알고리즘을 제안하였다. 제안한 알고리즘은 입력 신호와의 의존성을 줄이기 위해 확률을 이용한 방법을 기초로 하였으며, 알고리즘의 정확성을 입증하기 위해 시스템을 설계, HSPICE를 이용한 시뮬레이션 결과와 비교하였다. 본 논문에서 제한한 알고리즘을 이용하여, 널리 알려진 시스템(ISCAS 85, ISCAS 89)의 소모전력을 예측한 결과, 시뮬레이션을 통해 얻은 결과와 비교해 봤을 때, 10% 이내의 오차 한도를 가진 것으로 분석되었다.

  • PDF

Design of Heat Pump System in Air Heat Source Type (공기열원 히트 펌프 시스템 설계)

  • Lee, Yun-Min;Shin, Jin-Seob
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.19 no.6
    • /
    • pp.73-77
    • /
    • 2019
  • In this paper, the heat pump system was designed using heat absorption of the refrigerant or condensation heat. The cooperation system has been developed to pass a heat source of low temperature to a high temperature or to pass the heat source of high temperature to a low temperature. Heat pump for using the valve as a function of switching a condenser and an evaporator in a refrigerating cycle. As a result, heat pump system was developed by air source method. Therefore cooperating system for energy saving to solve at the same time as the cooling and heating by system of one was equipped.

Analysis of Cooling Characteristics according to Heating Reduction System Displacement of Major Heating Region on Power Inverter (전력 역변환장치 주요발열부의 열 저감 시스템 변위에 따른 냉각 특성해석)

  • Kim, Min-Seok;Kim, Yong-Jae
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.2
    • /
    • pp.261-266
    • /
    • 2015
  • Power system for renewable energy is composed of module, transform DC power into AC power inverter, control power flow and device for a charge of the grid-connected. Power system for renewable energy produce the most DC power, when this system is much insolation in summer and daytime. But if the certain temperature rises above, the essential grid-connected power inverter is take a nose dive. There, in this paper, we propose an improved reduction of heating system. In addition, selection of the most serious heat region and through analysis of temperature characteristics according to location and distance derive the optimal model.

Vibration Test for PCB/Connector Assembly (인쇄회로기판 진동이 커넥터에 미치는 영향)

  • 허남일;김성철;송규섭
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.160-164
    • /
    • 1995
  • 정보통신 시스템의 고속/고밀도화 요구에 따라 개발되고 있는 ATM(Asynchronous Transfer Mode) 교환기 시스템은 팬을 이용한 강제대류냉각 방식의 채택과 시스템이 설치되는 장소에 따른 여러 환경조건에 의한 진동 문제가 발생될 수 있다. 시스템의 진동으로 인한 피해중 커넥터 접촉부에서 전기적 특성의 변화는 고속으로 전송되는 신호의 왜곡을 유발시킬 수 있어 시스템 개발시 이에 대한 충분한 연구 및 시험이 요구되고 있다. 진동환경에서 커넥터 접촉부는 접촉면의 상대운동으로 인한 접촉저항의 증가와 순간적인 신호전달 중단을 가져오게 되며, 특히 PCB/Connector Assembly에서 커넥터 접촉부는 PCB(Printed Circuit Board)의 장착 조건 및 동적 거동에 따라 전기적 특성이 변할 수 있다. 시스템에서 커넥터의 동적 거동을 이해하기 위해서는 PCB를 포함하는 시스템내 여러 요소의 동적 특성 이해와 복잡한 해석과정이 요구되며, 시스템 개발자는 진동 환경에서 이것의 시험 결과에 따라 커넥터의 사용을 결정해야 할 것이다. 커넥터의 전기적 특성 시험법은 IEC, EIA드 여러 국제 규격에 제시되어 있으며, 본 연구의 대상이 된 ATM교환기 시스템에서 PCB/Connector Assembly의 진동환경에서 접촉저항 측정과 관련된 접촉저항 임계치 및 측정법은 IEEE 규격 및 Bellcore 규격에 규정되어 있다. Bellcore에는 주어진 진동시험주기 전후에 IEC 규격의 LLCR(Low Level Contact Resistance) 측정회로를 이용한 측정법이 규정되어 있고, 냉각팬 및 주위 환경진동이 가해지는 동안의 영향에 대한 시험법은 규정되어 있지 않다. 본 연구에서는 한국통신의 전자장비 운용환경시험 조건의 진동에서 ATM 교환기 시스템에 사용되는 PCB/Connector Assembly 커넥터 접촉부의 접촉저항 변화와 PCB 진동에 의한 영향을 시험하였다.proach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.로 성능 및 안정도에 영향을 미치므로 주의 깊게 선정해야 한다. 방법의 실질적인 적용에는 어려움이 있다. 본 연구에서는 기존의 방법들의 단점을 극복할 수 있는 새로운 회귀적 모우드 변수 규명 방법을 개발하였다. 이는 Fassois와 Lee가 ARMAX모델의 계수를 효율적으로 추정하기 위하여 개발한 뱉치방법인 Suboptimum Maximum Likelihood 방법[5]를 기초로 하여 개발하였다. 개발된 방법의 장점은 응답 신호에 유색잡음이 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field and the maximum relaxivity v

  • PDF

The Research for cyber security experts (사이버보안 전문가 양성을 위한 연구)

  • Kim, Seul-gi;Park, Dea-woo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.05a
    • /
    • pp.301-304
    • /
    • 2016
  • Cyber world constitute the infrastructure of the country and its people and control. Cyber attacks and leakage of personal information are being threatened damage to the national economy and national security. December 2014 had been cyber hacking attacks on Korea Hydro & Nuclear Power Nuclear cooling system design drawings of a spill, and Cheong Wa Dae website hacked, KBS stations occurred in cyber hacking accidents. As a result, ICT-based Protection Act, Promotion of Information and Communications Network Utilization and Information Act on Protection, etc., privacy laws are being enforced, personal information in the form of requirements from leading high-tech eoryeowoona is to prevent the attacks of armed hackers Internet information society It proposes positive measures to keep your personal information officer and laws.

  • PDF

Performance Analysis of Emergency Communication System of Nuclear Power Plant using Markov Model (마코프 모델을 이용한 원전 비상 통신 시스템 성능 분석)

  • Son, Kwang Seop
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.3
    • /
    • pp.10-21
    • /
    • 2014
  • In Fukushima accident, when the severe accident such as a natural disaster happens, it is impossible to monitor the plant status due to a extreme environment and station blackout and most I&C systems break downs. Finally, these cause the loss of emergency cooling function and thus results in a hydrogen explosion and radiation leak. In this paper, the emergency response system is introduced that monitors and controls properly when the sever accidents like Fukushima accident happen, And the performance requirements of a wireless communication system used in the emergency respons system is described and the performance of emergency communication system is analyzed using the markov model.

Neuro PID Control for Ultra-Compact Binary Power Generation Plant (초소형 바이너리 발전 플랜트를 위한 Neuro PID 제어)

  • Han, Kun-Young
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.11
    • /
    • pp.1495-1504
    • /
    • 2021
  • An ultra-compact binary power generation plant converts thermal energy into electric power using temperature difference between heat source and cooling source. In the actual power generation environment, the characteristic value of the plant changes due to any negative effects such as environmental condition or corrosion of related equipment. If the characteristic value of the plant changes, it may lead to unstable output of the turbine in a conventional PID control system with fixed PID parameters. A Neuro PID control system based on Neural Network adaptively to adjust the PID parameters according to the change in the characteristic value of the plant is proposed in this paper. Discrete-time transfer function models to represent the dynamic characteristics near the operating point of the investigated plant are deduced, and a design strategy of the proposed control system is described. The proposed Neuro PID control system is compared with the conventional PID control system, and its effectiveness is demonstrated through the simulation results.

Overview of KMTNet Control Software

  • Cha, Sang-Mok;Lee, Chung-Uk;Lee, Yongseok;Kim, Dong-Jin;Lee, Dong-Joo;Kim, Seung-Lee;Jin, Ho
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.43 no.1
    • /
    • pp.70.3-70.3
    • /
    • 2018
  • 외계행성 탐색시스템의 망원경-카메라 제어 시스템 및 소프트웨어 구성과 관측 유틸리티에 대해 소개한다. 망원경 제어 소프트웨어는 천문 위치보정, 포인팅, 돔 회전 등을 담당하는 PC-TCS 프로그램, 망원경 적경-적위 축 서보 제어를 담당하는 full-closed loop PID 컨트롤 프로그램, 포커서, 필터박스, 돔 셔터, 주경냉각, 온도 모니터 등의 보조 시스템을 제어하는 AUX controls 프로그램으로 구성된다. 카메라 제어 소프트웨어는 모자이크로 구성된 여러 CCD를 각각 독립적으로 제어하는 IC(Instrument Control) 패키지와 이들을 총괄 제어하는 ICS(IC Science) 패키지로 구성되며 망원경과 카메라 소프트웨어의 인터페이스 역할을 하는 TCS Agent 프로그램이 포함된다. 관측 진행을 돕는 유틸리티로서 관측제어 명령어 입력 및 관측 스크립트 구동 기능을 제공하는 OBS Agent 프로그램과 가이드 CCD를 이용한 시상 모니터링 및 자동초점조정 프로그램을 개발하여 활용하고 있다. 각 소프트웨어는 UDP, TCP/IP, RS-232, Redis server 등 다양한 인터페이스를 통하여 서로 통신하며, CCD 영상 자료 전달을 위해 RAM(Random Access Memory) 디스크와 Network File System(NSF)을 이용하고 있다.

  • PDF