• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.406-409
• /
• 2003

In this paper, a 4-wavelength optical transceiver system is designed and implemented by using TFF (thin film filter) type OADMs (optical add-drop multiplexers). In this new system, the wavelengths of 1510 nm and 1530 nm are used for uploa and download signals, respectively, as well as the wavelengths of 1550 nm and 1310 nm which have been utilized in a 2-wavelength optical transceiver systems. The 4-wavelength optical module show pass characteristics of -1.6 dBm, -1.7 dBm, -5.6 dBm, -5.8dBm for 1510nm, 1530 nm, 1550 nm, 1570 nm, respectively, with 1.2 dBm of input laser power. The isolation for characteristics of the optical module for all the wavelengths are less than -40dB, which is very acceptable for filed requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.371-377
• /
• 2013

Fishing boats more than 5 tons is obliged to VHF DSC by Fishing Vessels Act and Vessel Safety Act. The owner of the fishing vessel is equipped to the automatic position reporting device in accordance with the Notice of the Minister of Land, Transport and Maritime Affairs to regulations, shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on fishing vessels. East sea set up to start in 2012, which is now underway the annual install plain to the yellow sea and the south sea for VHF coast stations. It is web-based remote operation of DSC on the remote control and monitoring in Fishery Information Communication Station for the coastal VMS construction project. All fishing vessels is VHF DSC in conjunction with the GPS that location information transmitted to the coast station. automatically by the DSC call. This paper has been studied on the communications coverage set up and traffic operation for realization a roaming service by navigation route tracking and RSSI techniques in parallel algorithm refer to VHF DSC coast stations in east sea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.637-644
• /
• 2012

In this paper, a new compact power divider is suggested. Instead of the quarter wavelength transmission line(TX-line)s for the branches of the conventional Wilkinson's power divider design method, we use our composite right- and left-handed(CRLH) TX-line zeroth order resonator(ZOR) bandpass filters of one twelfth wavelength and reduce the physical length of the power divider. Besides, the filters in the branches can secure the passband for power-division. To validate the proposed power divider, we take an L-band for millitary satellaite transponder as the test case and the performances of the circuit and full-wave simulation results with the CRLH properties of the structure are shown with the dispersion curve and E-field at the ZOR. The measurement is compared with the simulation results. Also, the size reduction effect by the proposed scheme is addressed

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.367-378
• /
• 2019

As the development of IT technology, the way to manage the underground construction site in real time using wireless network communication is being considered. Underground space is limited area compared to the ground site due to the enclosed communication environment and spatial characteristics. BMN (Bluetooth Mesh Networking) technology is a recently introduced wireless communication technology that bluetooth device acts as a repeater to form a networking mesh and monitor individual devices. This article examines the areas to be considered for analyzing the applicability of BMN technology to underground spaces, and the cases studies of wireless communication monitoring systems currently being developed. And the BMN technology which is being developed for the underground application is also introduced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.59-64
• /
• 2020

Occasionally, MODEM test in satellite communication systems are needed. But Rx terminals in satellite communications are designed to obtain high SNR generally, therefore artificial bad conditions and environments are demanded for the test. One of the typical method is satellite output power reduction. Using noise generator can be another method. However, these costs a lot of money, time, and procedures in reality. In order to overcome these problems, this paper proposes an artificial noise generation method for MODEM test in satellite communication systems. First of all, SNR of a general heterodyne Rx terminal is calculated. Based on the calculation, a new model which is including variable attenuator is proposed to increase noise level. Simulation results illustrate the variable attenuator can control SNR, and these show that MODEM test in satellite communication systems be possible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2007

Extension of the mobile communication and the rapidly developing services connected with wireless multimedia(W-CDMA, DMB, Wibro, and so on) need great many base station transceiver systems, antennas, and many signal transmission line to embody these services. The min communication appliances system is exposed always in danger of transient overvoltage by direct stroke or induced lightning surge flowing in through antenna because the antenna of base station transceiver system or relay equipment is combined with expensive communication network equipments through signal transmission line. Now, gas discharge tube(GDT) or narrow band stub arrestor which is used by the surge protector for communication use is exposing limitations as for lightning surge protective means of the communication facility with high speed and wide frequency band. Therefore, for improving performance of surge arrestor, we applied ceramic filter which can reduce lightning surge invading from antenna effectively, and proved that ceramic filter is effective in residual voltage reduction through the experimental research.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.1-12
• /
• 2008

In this paper, we described about core technologies required for the seamless service implementation and the communication system structure conceiving required for call & response services in order that the real-time traffic information service is consecutively provided to the vehicle moving at high speed. The SMART highway service is the information communication environment build-up concept which the real-time C&R service is comprised of the vehicle moving with 160km/h above. It was possible in case of being the low speed car in the DSRC system structure. However, there is a limit in the high speed environment as the DSRC system like a convention. In this paper, we proposed the structure of fitting for the SMART highway environment using the hand-over technique compositing the base station and several repeaters of DSRC system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1074-1081
• /
• 2021

It has recently been noticed that the headway of unlicensed wireless technology is necessary as user's demands of wireless tech increase and the development of high-speed data service by using low-power short-range wireless network is needed. Hence, it is inevitable to study sharing and coexistence for broadband spectrum of diverse unlicensed application with wide bandwidth. In this paper, an interference examination between unlicensed WiFi (Wireless Fidelity) in the 6GHz and OB (Outside Broadcasting) system which is an incumbent service in the same frequency band was conducted and it suggests separation distance for the coexistence. Thus, MCL (Minimum Coupling Loss) and MC (Monte Carlo) methods were used to set up interference scenarios for the interference analysis and compute the separation distance between two systems according to the same frequency band and frequency separation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.87-92
• /
• 2015

In this Paper, we proposed optimization of system performance, optimal splitting factor ${\alpha}$ applied to power splitting protocol with relay protocol with decode and forward undergo co-channel interference. We can possible to optimize and maximize the channel capacity of the receive performance and the efficiency of the network through optimal factor of splitting protocol. We verified BER performance and Channel capacity and Outage probability for the proposed scheme over Rayleigh fading through Monte-Carlo simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2317-2323
• /
• 2015

In this paper, we analyze the performance of dual-hop amplify-and-forward (AF) relaying in cooperative networks with partial relay selection. An AF relay gain considered in this paper includes channel-noise-assisted relay gain. Leveraging a received signal-to-noise ratio (SNR) model, we derive exact closed-form expressions for the probability density function (pdf) and cumulative distribution function (cdf) of the end-to-end SNR. Moreover, an exact closed-form expression of the ergodic capacity for dual-hop AF relaying with channel-noise-assisted relay gain and partial relay selection is investigated. The analytical results shown in this paper are confirmed by Monte-Carlo simulations.