• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.235-246
• /
• 2009

The number of industry wireless networks based on IEEE 802.11 WLAN technology deployed in large outdoor work sites, such as freight container terminal, is increasing these days. Wider service coverage, frequent movements of stations and high requirement on service reliability are main characteristics of these networks compared to the conventional IEEE 802.11 networks used in home, office and school. While the importance of these networks Bets higher, we can hardly find previous studies including concrete analysis on these networks based on actual experiments. We carried out several field experiments at a freight container terminal to analyze its IEEE 802.11 network and found out some problematic situations, such as over 50% retransmission rates and frequent disruption of communication link while a station is moving. We explain why these problematic situations happen and suggest some solutions, such as application of mesh technology, smart handoff based on location and movement pattern and adjustment of signal strength and channel allocation. Methods and tools used in the experiments are also detailed in the paper which may be helpful for similar future studies.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.1
• /
• pp.63-72
• /
• 2010

RFID is one of useful identification technology in ubiquitous environments which can be a replacement of bar code. RFID is basically consisted of tag, reader, which is for perception of the tag, and back-end-database for saving the information of tags. Although the usage of mobile readers in cellular phone or PDA increases, related studies are not enough to be secure for practical environments. There are many factors for using mobile leaders, instead of static leaders. In mobile reader environments, before constructing the secure protocol, we must consider these problems: 1) easy to lose the mobile reader 2) hard to keep the connection with back-end-database because of communication obstacle, the limitation of communication range, and so on. To find the solution against those problems, Han et al. suggest RFID mutual authentication protocol without back-end-database environment. However Han et al.'s protocol is able to be traced tag location by using eavesdropping, spoofing, and replay attack. Passive tag based on low cost is required lots of communication unsuitably. Hence, we analyze some vulnerabilities of Han et al.'s protocol and suggest RFID mutual authentication protocol without online back-end-database in aspect of efficiency and security.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.754-762
• /
• 2021

Seamless wireless communication network access technology enables users to guarantee service continuity. Hence, it is necessary for disaster situations in which network service may be interrupted. The Multi-path router is a technology to improve network stability and strengthen field operability, particularly in a disaster environment where network failure can occur by providing high-performance data transmission using multi-communication networks and network security by VPN-based wireless IP. In this paper, a prototype system for an MPR-based wireless communication network was proposed to improve the operation performance for disaster field investigation applications. A comparative experiment was performed on various data transmission performances with the existing single wireless communication network. In addition, another experiment was conducted by measuring the data packet transmission and receiving performance in the existing/new wireless communication system first and then assessing the UDP transmission performance in a single router environment to understand the transmission capability of the new MPR. The experimental results showed that the sending and receiving performance was improved by approximately double that of the existing single wireless communication system. The proposed prototype system is expected to allow users to share and disseminate collected on-site data more quickly and efficiently during a disaster site investigation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.145-154
• /
• 2018

A loosely coupled message broker system is a popular method for integrating distributed software components. Especially, a distributed broker structure with multiple brokers with active-standby or active-active message replicas are used to enhance availability as well as message processing performance. However, there are problems in both active-standby and active-active replica structure. The active-standby has relatively low processing performance and The active-active structure requires a high synchronization overhead. In this paper, we propose an active-active structure of replicas to increase the availability of the brokers without compromising its high fault-tolerancy. In the proposed structure, standby replicas process the requests of the active replicas so that load balancing is achieved without additional brokers, while the distributed coordinators are used for the synchronization process to decrease the overhead. We formulated the overhead incurred when synchronizing messages among replicas, and the formulation was used to support the experiment results. From the experiment, we observed that replicas of the active-active structure show better performance than the active stand-by structure with increasing number of users.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.12
• /
• pp.295-300
• /
• 2018

The rapid development of IT, many conventional passive jobs have been automated. This automation increases the leisure time of many people and various services are being developed for them. In addition, with the advent of smart devices that are compact and portable, it is possible to use various internet services without any time and place discretion. Various studies based on virtualization are under way to efficiently store and process large data generated by many devices and services. Desktop Storage Virtualization (DSV), which integrates and provides users with on-premise-based distributed desktop resources during these studies, uses virtualization to consolidate unused resources within distributed, legacy desktops. This DSV is very important for providing high reliability to users. In addition, research on hierarchical structure and resource integration for efficient data distribution storage processing in a distributed desktop-based resource integration environment is underway. However, there is a lack of research on efficient operation in case of server failure in on-premise resource integration environment. In this paper, we propose Non-disruptive Server Management (NSM) which can actively cope with the failure of desktop server in distributed desktop storage environment based on on-premise. NSM is easy to add and remove desktops in a desktop-based integrated environment. In addition, an alternative server is actively performed in response to a failure occurrence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.778-786
• /
• 2012

Sensors that are used on wireless sensor networks can be divided into two types: directional sensors, such as PIR, image, and electromagnetic sensors; and non-directional sensors, such as seismic, acoustic and magnetic sensors. In order to guarantee the line-of-sight of a directional sensor, the installation location of the sensor must be higher than ground level. Among non-directional sensors, seismic sensors should be installed on the ground in order to ensure the maximal performance. As a result, seismic sensors may have network connectivity problems due to communication failure. In this paper, we propose a 3D node deployment method to maximize the coverage and the network connectivity considering the sensor-specific properties. The proposed method is for non-directional sensors to be placed on the ground, while the directional sensor is installed above the ground, using trees or poles, to maximize the coverage. As a result, through the topology that the detection data from non-directional sensors are transmitted to the directional sensor, we can maximize the network connectivity. Simulation results show that our strategy improves sensor coverage and network connectivity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1135-1144
• /
• 2018

An electric wheelchair used to be utilized as a piece of equipment for the disabled and the elderly in the past, but the recent changes to its functions and forms have made it available across various fields and purposes. In this paper, we propose a continuous track type of electric wheelchair prototype to be used in various fields and environments and a monitoring system to control it. A frame stress design was applied to improve its stability during driving compared with the previous wheelchairs. In addition, we provide a convenience for free and easy operation of them using the App. based on android. A monitoring system based on C# was also added to control a large number of electric wheelchairs. As a result of the implementation and performance evaluation, the von Mises stress value was measured 4.401% within the normal range through five times of stress interpretations, and its accuracy of communication for system manipulation was recorded about 98.75%, which means that it has been proven to be safer than the previous wheelchairs.