• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.920-929
• /
• 2004

Nowadays, wireless packet data services are provided over cdma2000 1x/1xEV-DO mobile communication network and Portable Internet are being standardized for users demanding higher data rate services. Portable Internet can provide high data rate services, but its service coverage is relatively small. If Portable Internet may be integrated with cdma2000 mobile networks, users are able to choose the best service according to service areas and get seamless services while they are moving around. At the same time, it is cost-effective for operators to construct and maintain the integrated network. For the purpose of effectively integrating Portable Internet into cdma2000 networks, we propose an integration scheme including network architecture, protocol architecture, functions in network elements, interfaces between them, and call-flow procedures. The integration scheme proposed in this paper adopts a tightly-coupled architecture for unified authentication/accounting and seamless services. In addition, the scheme can be implemented without modifying the existing cdma2000 mobile communication networks. It is also simple to develop the dual-mode mobile station. Through the simulation results based on the performance model for handoffs between cdma2000 and Portable Internet, it has teen validated that the proposed scheme diminishes packet losses compared with the loosely-coupled architecture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.43-52
• /
• 2018

Livestock production is the second largest economic activity of Pakistan's rural population, more specifically; sixty-seven percent of Pakistan's total population that live in rural areas sources their income from livestock activities. As this subsector of agriculture within rural Pakistan is so critical to Pakistan's economy it is especially important to further develop the sector through the introduction of cost effective, efficient, and practical technologies. In an effort to improve such an important sector within the agriculture sector in Pakistan research has been carried out to better understand the capabilities and feasibility of leveraging Internet of Things based technologies, such as, microprocessors and microcontrollers within Pakistan's livestock production and management. The internet of Things can potentially allow for the scaling of small-scale rural livestock production to larger operations through cost effective and efficient livestock management through the application of IoT technologies. This paper discusses the architecture models of IoT based smart animal farms and delves into the pitfalls and advantages of applying IoT technologies in this sector. In this work we will explore the cheap sensors to monitor the internal activities of cattle farm with the aim of using these sensors as part of system to detect the important operations that need on the time response. This system should provide the feed and water as required, and control the temperature in sheds to protect the cattle being ill and on heat, and humidity level .internet connection used to connect these devices with smartphones or computers. In this paper we proposed the architecture model of IoT based smart animal farm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.79-81
• /
• 2014

Recently, It is built various information systems evolve IT skills. But When you build the information system, Difficult to determine whether the appropriate scale and problems that rely heavily on SI companies and professionals. To solve this problem, Korea Information Security Agency, etc., based on the primary objective was to develop H/W Capacity Equation formally to each system type. But the problems are to present H/W capacity equation by discussion of the expert group of suppliers and relatively long that it is difficult to formally apply in the situation now so it is no longer the limit. In this study, we proposes proper capacity planning techniques, which can guarantee the best performance compared to the budget invested. For this purpose, we derived the proper H/W capacity equation by regression analysis to gather performance metrics and cost of various cases by simulation of a virtual environment in the cloud. Through this study, when capacity planning, It is possible to reduce costs that It is possible to build an information system based on the digitized data and build information system in an environment that does not rely on the SI business or professional.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.661-667
• /
• 2008

The dynamics of business cycles has been changed by the macroscopic economic forces because of the introduction of new technical know-how each year. These the dynamics of business has a significant influence on the investment of enterprise in the information communication field. Today, the most important goal of the IT investment is simply not to lower the production cost any more, but to improve the usefulness for the customers and partners in order to obtain the optimized mass products. Therefore, the enterprises have been concentrating their all abilities on the automation, integration, and optimization of business process using BPM. In addition, they are concentrating their efforts on the business expansion by approaching the technical aspect using RFID application system. However, in order to accomplish a successful enterprise ability, the technical view, business process view, and organization view must be considered together. We suggested the method considering organization view, via the technical element, i.e., RFID system for approaching the business process. Furthermore, we tried the optimization of assignment using Context Analysis methodology and proposed the method to reduce the element with respect to the time, human, and expense by applying the Case Study method that minimizes the iteration times through the transmitted processing procedure and type. The proposed method gave us the expectation that it will bring out the innovative improvement with respect to the time, expense, quality, and customer's satisfaction in the process from the analysis of business process to the analysis and design of system.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.620-630
• /
• 2006

Event-detection is an important application of sensor networks. Join operations can facilitate event-detection with a condition table predefined by a user. When join operations are used for event-detection, it is desirable, if possible, to do in-network join processing to reduce communication costs. In this paper, we propose an energy-efficient in-network join algorithm, called PBA. In PBA, each partition of a condition table is stored along the path from each node to the base station, and then in-network joins are performed on the path. Since each node can identify the parts to store in its storage by its level, PBA reduces the cost of disseminating a condition table considerably Moreover, while the existing method does not work well when the ratio of the size of the condition table to the density of the network is a little bit large, our proposed method PBA does not have such a restriction and works efficiently in most cases. The results of experiments show that PBA is efficient usually and especially provides significant cost reduction over existing one when a condition table is relatively large in comparison with the density of the network, or the routing tree of the network is high.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.122-129
• /
• 2020

Surion is required to install radios (U/VHF-AM, VHF-FM) capable of omni-directional communication. Therefore, this paper demonstrates the antenna performance test for the installation of the Surion communication antenna and the selection of optimal location. A simulation pattern analysis was performed employing the antenna, and a coupling test was performed by creating a new evaluation criterion. In addition, the results of the pattern flight test conducted at the previously suggested 1:20 turn and separation distance ratio were observed to be normal. However, the occurrence of voice cutoff was noted in the long-distance flight test. Therefore, in this paper, 1:300 (15 NM) is proposed as a new optimal ratio for predicting the long-distance flight test results in advance. Finally, the effectiveness of the proposed evaluation criteria was verified through long-distance flight tests. Consequently, it is expected to reduce the development schedule and cost by reducing the trial and error of the performance test for the Surion model. Also, the results of this study are expected to be used as standards for the installation of communication antenna and quality tests for other helicopters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2091-2098
• /
• 2006

In this paper, it proposes a protocol of resource adaptive data dissemination for sensor nodes in a wireless sensor network. In general, each sensor node used in a wireless sensor network delivers the required information to the final destination by conducting cooperative works such as sensing, processing, and communicating each other using the battery power of a independent sensor node. So, a protocol used for transferring the acquired information to users through the wireless sensor network can minimize the power consumption of energy resource given to a sensor node. Especially, it is very important to minimize the total amount of power consumption with a method for handling the problems on implosion. data delivery overlapping, and excessive message transfer caused by message broadcasting. In this paper, for the maintaining of the shortest path between sensor nodes, maximizing of the life time of a sensor node and minimizing of communication cost, it presents a method for selecting the representative transfer node for an event arising area based on the negotiation scheme and maintaining optimal transfer path using hop and energy information. Finally, for the performance evaluation, we compare the proposed protocol to existing directed diffusion and SPIN protocol. And, with the simulation results, we show that the proposed protocol enhances the performance on the power consumption rate when the number of overall sensor nodes in a sensor network or neighbor sensor nodes in an event area are increased and on the number of messages disseminated from a sensor node.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.443-446
• /
• 2003

This paper implement Remote Meter Reading System which is used Bluetooth and SMS in CDMA. This System propose system which tan detect a total amount of gas, electricity or water without a meterman, at home BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the small size is present. Nowadays, SMS Protocol in CDMA for have a network function based on PPP in CDMA Phone. The proposed Remote Meter Reading System to get more nobility, efficiency, and have good function. SMS Protocol in CDMA have profits which is low power, low cost, and low microwave output.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.297-306
• /
• 2015

Cloud computing has been increasingly used in various fields due to its flexibility, scalability, cost effectiveness, etc. Recently, many scientific communities have been attempting to use cloud computing as a way to deal with difficulties in constructing and operating a research infrastructure. Especially, since they need various collaborations based on networking, such as sharing experimental data, redistributing experimental results, and so forth, cloud computing environment that supports high performance networking is required for scientific communities. To address these issues, we propose RealLab, a high performance cloud platform for collaborative research that provides virtual experimental research environment and data sharing infrastructure over KREONET/GLORIAD. Additionally, we describe some RealLab use cases for showing the swift creation of experimental environment and explain how massive experimental data can be transferred and shared among the community members.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.164-171
• /
• 2019

Focusing on the bridge facilities, which occupy the largest proportion among SOC public facilities in Korea, it is possible to reduce the cost compared to existing wired measurement systems or wireless measurement systems developed by domestic telecommunications companies, and to increase the technical perfection to be applied to many bridges. We developed a wireless measurement system for bridges. Using LoRa, one of the unlicensed LPWAN technologies, we have developed an optimized MEMS-based LoRa smart sensor node considering the domestic ISM band and the existing wired sensor LoRa DAQ sensor node that can communicate with the LoRa network. Application server was developed for the test bed performance verification and efficient management of the developed sensor node.