• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.60-65
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass later with notched band at fireless-LAN band using a band-pass and band-notch filter. The structure of our proposed band-pass filter is very simple, and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic, and an embedded open-stub structure is used to get the notched filter. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement, the insertion loss is less than 0.7dB throughout the pass-band of $2.21GHz{\sim}10.92GHz$, the return loss is more than 17dB and the group delay maximum variation is 0.24ns and a notched band is at $5.3GHz{\sim}5.7GHz$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.463-470
• /
• 2015

In this paper, a new dual-band bandpass filter(BPF) that has resonators and feed lines with Stepped-Impedance Resonator(SIR) structures is proposed. Feed lines with SIR structure provide maximum magnetic field points which occur at the same locations of the input and output feed lines, so the insertion loss of BPF was reduced. Applying the SIR structure to the BPF for the first passband improves rejection characteristics between the first passband and the second passband. It reduces the coupling between the BPF for the first passband and the BPF for the second passband, so it makes the dual-band BPF more compact. The proposed design method provides independent changes of both the center frequency and the bandwidth for each resonator, and also improves filtering characteristics. The validity of the proposed design method is confirmed by comparisons between the designed parameters and the measured results satisfying WLAN specifications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.73-77
• /
• 2012

In this article, we designed a wide bandpass filter in order to apply microwave reflectometry for KSTAR. The proposed wide bandpass filter consists of a metamaterial structure which is to get a wide band, a lower insertion loss, and a high skirt. This is applied to VCO's output to enhance the linearity. A pass band is 18-28 GHz and the out of pass band is stopped over 20 dB. To confirm of the metamaterial, we suggest a dispersion diagram. The proposed filter in lower band and upper band of pass band is respectively a left handed and right handed characteristics. A group delay is below 0.5 ns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1734-1739
• /
• 2014

In this paper, microstrip low pass filter using transmission line with the modified DCRLH structure is designed and fabricated to be removed a spurious resonant mode, and a deep attenuation in stop band. The low pass filter is composed of shunt open-stub to get a deep attenuation and series short-stub to eliminate the spurious harmonics in stop band. In this way, the spurious harmonics occurring on the higher order frequency are suppressed and the filter performance is improved. Insertion loss and VSWR of the fabricated microstrip low pass filter in the passband from DC to 1.5 GHz is 1.26 dB and 1.65, and attenuation on the stopband from 1.84 GHz to 2.18 GHz is less than -100 dB. And also this filter has a good performance for 20 watt power test.

• Journal of Korean Society of Transportation
• /
• v.24 no.4 s.90
• /
• pp.129-148
• /
• 2006

The objective of this thesis is to develop a capacity analysis and to develop a methodology to evaluate Level of Service over the entire freeway sections by single MOE (Measure of Effectiveness) This study set forth from a following viewpoint. to analyze entire freeway sections as freeway facility system, it is important to identify the exact point where congestion would occur and the extent of the congestion. Therefore, in this thesis, congestion mechanism on freeways was figured out and congestion analysis methodology was developed. Thereby maximum possible throughput rate and maximum throughput rate in bottleneck sections were calculated and a congestion analysis was carried out. The difference between the new method and existing Procedures is that maximum possible throughput rate and maximum throughput rate. that can be considered as capacities of un-congested and congested flow in the bottleneck section, are variable capacities dependent on demand flow.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1054-1060
• /
• 2002

In this paper, a new parallel-coupled-line microstrip BPF(BandPass Filter) improving the suppression performance of 2nd harmonic signals is studied. Using the consecutive pattern in coupled-line, the desired passband performance is improved and harmonic passband signal is rejected. Recalculation of classical filter design parameters(space-gap between lines, line widths and lengths) is not required. That is, after using the classical design methodology for parellel-coupled-line BPF, new filters can be easily realized by inserting periodic patterns in coupled-line. To investigate the validity of this novel technique, order-3 Butterworth BPF centered at 2.5 GHz with a 10 % FBW(Fractional Bandwidth) and order-5 Chebyshev BPF centered at 10 GHz with a 15 % FBW were used. When five and three square grooves are used, over 30 dB harmonic suppression at 2nd harmonic is achieved in simulation and experiment.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.163-182
• /
• 2011

This research addresses the prospect of international intermodal transport in North-East Asia and studies the necessity of an agreement in transit transport in the region. Due to the division of labour among countries in the region and the globalization of firm's activities, international intermodal transport has been actively developed and is expected to grow continually. In order to lead the operation of international intermodal transport in North-East Asia, main players such as China and Russia have strengthened cooperation of regional logistics and made agreements in transit transport with contiguous countries. After analysing the current situation and reviewing prospects of international intermodal transport and transit transport in North-East Asia, this research proposes the requirement of regional agreement of transit transport on the basis of the United Nations Convention on the Law of the Sea (UNCLOS) for promoting international intermodal transport in North-East Asia.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.620-625
• /
• 2003

The coplanar waveguide bandpass filter using folded-line stepped-impedance resonators(SIRs) is proposed. The folded-line SIR has about λ/8 length using the short-circuited end on coplanar waveguide. It make that the bandpass filter has the half size in comparison with general λ/4 SIR filter. In this paper, we derive the equivalent circuit and design the bandpass filter by using that. We design and fabricate the bandpass filter which has 5 GHz center frequency and 3 % fractional bandwidth. The measurement results fur 4-pole folded SIR bandpass filter agreed well with full-wave simulation and equivalent circuit results. The fabricated bandpass filter has a good spurious characteristic, which the harmonic frequency appeared at 2.5f$\_$0/). The proposed folded-line SIR bandpass filter are applicable for MMIC and High-Tc superconducting filters. bandwidth.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.799-804
• /
• 2008

In the paper, a dual-bandpass filter for ship's wireless LAN has proposed, which was designed by using step stub in compliance with 2.4 GHz and 5.2 GHz band The dual-bandpass filter can be designed by adjusting the sizes of the step stub in compliance with the frequency bands of 2.4 GHz and 5.2 GHz, which has the improved performance compared with the existing dual-bandpass filter. Furthermore, dual-bandpass filter using step stub has better efficiency. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence it was confirmed that the proposed design method is valid.