• Animal Systematics, Evolution and Diversity
• /
• v.11 no.1
• /
• pp.39-64
• /
• 1995

A faunistic and ecological study on the occurrence of freshwater cladocerans and copepods was accomplished from Chindo, South Korea. Collections were made from total 35 stations, comprising the various freshwater habitats like reservoirs, streams, swamps, bogs, ricefields, ditch, pond, and spring during the periods of July 23-25, and November 1-3 in 1994. Twenty seven cladoceran species of 17 genera of 6 families in 2 orders, and 28 copepod species of 21 genera of 6 families in 3 orders were collected during this research period, of which Daphnia obtusa Kurz and Elaphoidella bidens (Schmeil) are newly recorded from Korea. In reservoirs, Diaphanosoma sp. and Thermocyclops taihokuensis were dominant in July, and then succeeded by Bosmina longirostris and Cyclops vicinus vicinus in November. Thermocyclops crassus co-occurred with 7: taihokuensis at both seasons, was frequent in November after T. taihokuensis precipitately decreased. In other stagnant waters, 7: taihokuensis and Moina weismanni were dominant at ponds in July and in November, respectively. At ricefields in July Moina macrocopa and T. taihokuensis were dominant, but in November M. macrocopa and Paracyclops fimbriatus were. At streams, cladocerans were relatively rare, but became more rich in November. The representative cladoceran species were Bosmina longirostris as a plankton, and Chydorus sphaericus as a epibenthic species. Concerning copepods, nearly all the stations of streams except a few ones adjacent to seashore showed the similiar species constitutions, of which E. serrulatus and M, pehpeiensis were most frequent and abundant. At a mountain streamlet and a spring, the occurrence of Alona sp., Attheyella byblis Chang and Kim, 1992 and A. tetraspinosa Chang, 1993 is quite interesting and deserved much attention in the taxonomical point of view. Seventeen major cladocerans and copepods from lentic habitats and 13 major cladocerans and copepods from lotic habitatats were clustered using average taxonomic distance and UPGMA to infer the co-occurrence relations among species. As for lentic habitats, two large phena were appeared at first. The one phenon consisted of Diaphanosoma sp. and T taihokuensis, and showed its predominancy over the various habitats and its dominancy was rapidly decreased in November. The other phenon frequently occurred rather in November, and subdivided into three subgroups. On the other hand, as for lotic habitats, 13 species were also grouped into 2 large phena. The first one comprised 4 species, which were dominant and highly frequent at nearly all the lotic habitats, and subdivided into three subgroups according to their seasonal fluctuation types. The second one was also subdivided into three phena, the first of which comprised only one species, Microcyclops varicans, and occurred at most of the stations along stream with steadiness through the research period; the second phenon, Chydorus sphaericus, occurred much frequently in November; the last phenon included a few heterogenous subgroups.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.3
• /
• pp.175-186
• /
• 2005

Cladistic analysis was performed to reveal the interspecific relationship of nine taxa of Korean Diplazium (Woodsiaceae). A total of 29 taxa with 20 taxa of eastern asiatic species as ingroup and three taxa of Athyrium as outgroup, were analyzed with 17 morphological characters. Diplazium nipponicum, recently found from Jeju Island, was most closely related to D. chinense by having the acuminate apex of pinnule segment and fascicled fronds. Diplazium nipponicum was distinguished from D. chinense by having scales and pinnule segments of serrated margin, and non-overlapped pinnules. Diplazium nipponicum and D. chinense were closely related to D. mesosorum and D. hajizoense in sequence, by having long acute apex in pinnae. These species formed same clade with D. subtripinnatum, which is endemic to Japan and D. kawakamii, which is distributed in Japan and Taiwan.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.3
• /
• pp.369-378
• /
• 2013

PURPOSE: The purpose of present study was to ascertain how the activity of the serratus anterior muscle, the upper trapezius muscle and the pectoral major muscle was affected while the upper arm was being flexed at 70, 90 and 110 degrees respectively in a closed kinetic chain exercise (wall push up plus) and an open kinetic chain exercise (static hug). METHODS: Sixteen healthy young men subjects participated in the study. Surface electromyography (EMG) data were collected from the dominant-side muscles during a closed kinetic chain exercise and an open kinetic chain exercise. The activity of each muscle was measured quantitatively, and by the use of the two-way repeated ANOVA, the data were compared with each other according to exercises and shoulder flexion angles. RESULTS: Results indicated that the closed kinetic chain exercise did not interact with the open kinetic chain exercise (p>.05). In both the closed kinetic chain exercise and the open kinetic chain exercise, the activity of the serratus anterior muscle became different significantly according to angles (p<.05). Its activity increased in order of 70, 90 and 110 degrees (p<.05). In both exercises and all angles, muscle activity was significantly higher in the serratus anterior muscle than in the upper trapezius muscle and the pectoral major muscle (p<.05). CONCLUSION: The above results show that there is a need to selectively control the exercise stress of the serratus anterior muscle in the case of the patients with the shoulder impingement syndrome characterized by the winged scapula, insufficient scapular protraction and upward rotation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.125-133
• /
• 2016

As one of solutions to pursue the efficient use of spectrum resource, we proposed the methodology for the co-channel multi-site radar operations with the synchronous GPS clock. The proposed algorithm, based on a quasi orthogonal property, find a candidate set of the time shifted linear frequency modulation(TSLFM) signals with the minimum acceptable level of the correlation among selected TSLFM signals. To check suggested algorithm, numerical analysis for several radars operating in the same channel with a sawtooth waveform has been performed by using range-Doppler processing for the given system parameters, and computational results are presented and examined in terms of range profile and doppler shift for a targets with velocity and distance. Simulated results have a good agreement with assumed target distance and its velocity, within the error of resolution.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.308-322
• /
• 1991

A set of experiments of Counter-Current Flow Limit(CCFL or Flooding) was performed to improve the drawbacks of Wallis' Correlation which neglects the effects of channel size, channel length, injection method and the boundary conditions at the inlet of liquid and gas phase. In these experiments using water and air, the followings were found ; (i) The effects of channel size and length were quite significant. In large tubes(D>20mm), the flooding front occurred at the bottom of the channel and when the gas flow increased the front moved upward ; however, in small tubes(D<20mm), there were no upward movement of flooding front and the flooding just occurred at the liquid inlet. (ii) The effect of water inlet device was not as significant as that of channel length though the inlet boundary conditions could affect the flow development and flooding afterward. (iii) Once the flooding front reached the inlet of water injection device, an newly reduced flow condition was set up and resulted in another flooding corresponding to the new condition.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.193-199
• /
• 2012

The purpose of this study was to investigate the activities of the serratus anterior (SA) and upper trapezius (UT) muscles during scapular protraction exercise with a dumbbell. Twenty-one healthy subjects with no medial history of shoulder pain or upper extremity disorders were recruited for this study. Subjects performed scapular protraction at $90^{\circ}$ and $130^{\circ}$ shoulder flexion with a dumbbell in supine and standing positions. The activities of the SA and UT were measured via surface electromyography (EMG) during 4 scapular protraction exercises. A 2 (angle) ${\times}$ 2 (position) repeated-measures analysis of variance (ANOVA) was used to compare the normalized activities of the SA and UT and the UT/SA ratio. The results showed that activities of both the SA and UT were the highest for the scapular protraction exercise at $130^{\circ}$ shoulder flexion in the standing position. However, the UT/SA ratio was the lowest for the exercise at $90^{\circ}$ shoulder flexion in supine position. Therefore, for selective activation of the SA muscle, we recommend performing the scapular protraction exercise with a dumbbell in the supine position at $90^{\circ}$ shoulder flexion.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.1 no.1 s.1
• /
• pp.105-118
• /
• 2003

The purpose of this study was to analyze entertainer Byeon Jeong-su's hair styles and thereby, apply the results to models. For the applications, models' hair styles were bisected into two sections, and thereby, the edges of the outsides were cut into solid points, and thereupon, into diverse bases by using vertical section, Perpendicular direction and square angles. On the other hand, the insides were cut in the same way of the outside bases by using radial section, varied combing and $45{\sim}90$ degree head angles. In addition, tops and sides were arranged in their corners, while a graduation technique was used to express a natural difference of levels. The fringes were cut by using free-hand and slicing techniques. furthermore, the quantity and mass of the hairs were treated with such techniques as thinning, swing, effect, rolling, slide and slicing, while a bridge product was used for coloring together with a highlight technique. The hair styles were rendered for straight and wave by using an magic iron machine. It was confirmed through this study that the same cutting techniques would result in different images depending on individuals' physical shapes, facial shapes, head skeletons and types of hairs. Thus, it is required of the hair designers to suggest their own custom hair designs adequate to individuals' images through continued image-wise hair design practices.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.3
• /
• pp.142-146
• /
• 2014

In this paper, an antenna which has quad band in GSM/DCS/PCS/Bluetooth is proposed. This structure is designed with miniaturization for wide band characteristic based on monopole antenna and log-periodic toothed trapezoid patch antenna which has slots. To achieve multi-bandwidth is used the microstrip line on the substrate. An antenna size is $35mm{\times}20mm$ on FR-4(${\varepsilon}r=4.4$) ground substrate of $35mm{\times}75mm{\times}1mm$ size. And proposed antenna is satisfied with impedance bandwidth(VSWR ${\leq}$ 3). The simulated maximum radiation gain is 1.92 dBi, 3.26 dBi, 3.97 dBi at the center frequency of 0.92 GHz, 1.97 GHz, 2.45 GHz, respectively.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.65-73
• /
• 2007

Recently, large-scale underground cavern such as underground hydraulic-power plant tend to be constructed very largely, so long-length rock bolt are generally used to support the huge plastic zone. However, problems fur bend-ing shape of the long-length steel bar and the bonding effects of anchoring systems are caused during the construction of the long-length rock bolt. In this study, field pull-out test for long-length rock bolt are carried out to estimate the most efficient anchoring system among the saw-toothed shape, grooved shape and smoothed shape with each 6 shells for 5.0m, 7.5m, 10.0m, 15.0m length. The axial load and axial displacement are measured with each load stage and than test results are analyzed to evaluate the behavior characteristics for each anchoring systems of long-length rock bolt. Also, the improvements of anchoring systems are proposed and discussed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5419-5424
• /
• 2014

A weld scallop is a small quadrant or half circle type hole installed in the weld line cross area for easy welding operation. Many types of T-bars with a scallop can be welded in a block assembly stage in shipbuilding. The difficulties arise from the fact that scallops are to be filled by build-up welding after welding of the cross line is complete. In this study, a non-scallop block joint welding method was developed using special type CBM (ceramic backing material). The wedge shaped CBM was devised to insert a CBM into just the V groove of weld line cross area without weld scallop. A saw-toothed shape was adopted for easy cutting of the unnecessary part in the CBM fitting process. The applicability of the developed method was verified through welding experiments based on the yard welding conditions.