• KSBB Journal
• /
• v.16 no.4
• /
• pp.356-359
• /
• 2001

The ability of Pseudomonas putida to degrade toluene was studied in toluene-containing vials. The strain grows anaerobically in toluene as a sole source of carbon. When the initial toluene concentrations injected in the vial are varied, the changes of headspace toluene concentration and cell density are observed. We set a model for this vial and simulated the vial reactor using Matlab. With a variation of model parameters, simulated results were compared with the experiment.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.678-683
• /
• 2007

We isolated a toluene-degrading bacterium, TDB-4, from a bioreactor which designed to remove volatile organic compounds (VOCs) from the contaminated air. Based on the results of 16S rRNA gene analysis, it was classified as Pseudomonas sp. The toluene degradability was estimated in the variable toluene and bacterial concentrations. The bacterial growth and degradation rate was higher in the samples supplied with 50 ${\mu}mole/vial$ of toluene than with 10 ${\mu}mole/vial$. It was decreased, however, in the samples with 100 ${\mu}mole/vial$, indicating that toluene inhibit the growth or degradation activity of TDB-4 at high concentration. When the degradation ability of other compounds was examined, TDB-4 can degrade other VOCs such as styrene, benzene, and xylene. These results will be helpful to optimize the operating conditions to improve the efficiency of a bioreactor in detoxification of VOCs.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.34-36
• /
• 2007

마이크로파를 이용하여 활성탄의 재생과 톨루엔의 흡착회수에 관한 연구를 실행하였다. 마이크로파에 의하여 흡착된 활성탄의 톨루엔의 탈착온도를 얻었을 수 있었으며, 흡착제의 방전 문제를 극복할 수 있는 벤토나이트 광물을 이용한 구형활성탄을 제조하였다. 마이크로파를 이용하여 흡착제에 흡착되어진 톨루엔을 탈착하여 흡착제를 재생하였으며, 냉각 응축 장치를 이용하여 톨루엔을 회수하였다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.124-126
• /
• 2006

마이크로파 에너지의 열원을 이용하여 흡착된 톨루엔을 탈착함으로써 활성탄의 재생에 관한 실험을 실시하였다. 마이크로파를 조사함에 따라 흡착제의 온도가 급격히 상승하여 톨루엔이 탈착할수 있는 온도까지 빠른 시간에 도달하였으며, 이 열에 의하여 톨루엔이 탈착함을 알수 있었다.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.26-32
• /
• 2005

Surfactants can be used to enhance the mass transfer rate of hydrophobic compounds into the biologically active liquid phase, resulting in an increase in biodegradation rate of toluene. In this study, the mass transfer rate and the biocompatibility of toluene in the presence of various surfactants were evaluated. Four anionic and non ionic surfactants were tested: sodium dodecyl sulfate (SOS), TritonX-100, Tween 80, and BYK-345 (silicone surfactant). Experimental results showed that BYK-345 at the critical micelle concentration (CMC) enhanced the solubility of toluene. However, there was no increase in the solubility of toluene by SOS and TritonX-100 at their CMCs. With the addition of each surfactant into deionized water the mass transfer rate became faster than that of the case with no surfactant. A bottle study using toluene-degrading microorganisms showed that SOS seriously reduced toluene removal presumably due to the toxicity of the anionic surfactant and/or the substrate competition between the surfactant and toluene. In addition, the degradation rate of toluene was decreased in the presence of BYK-345, indicating that BYK-345 adversely affects the activity of microorganisms. However, TritonX-100 and Tween 80 did not decrease the degradation rate of toluene significantly. Rather, at the low concentration of TritonX-100 toluene degradation rate was even increased. Overall the experimental results suggest that TritonX-100 be the appropriate surfactant for enhanced biological degradation of toluene.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.37-43
• /
• 1994

Mononitrotoluenes were reduced to aminotoluenes using porphyrin as a catalyst in the presence of several types of reductants including hydrogen sulfide and 1, 4-dithiothreitol(DTT). Intermediates and final products of porphyrin-catalyzed reduction of mononitrotoluenes were identified and a pathway for the reduction of the nitro group to the corresponding amino group was proposed. The optimum pH for the reduction was determined. The catalytic activity of the porphyrin was confirmed by UV/VIS absorption spectra and basic kinetics of porphyrin-catalyzed reduction were studied. Of several types of reductants tested, DTT sodium hydrosulfite, and hydrogen sulfide were seen to give significant reduction of nitrobodies. When hydrogen sulfide was used as a reductant hydrogen sulfide and nitrotoluenes were removed simultaneously.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.117-125
• /
• 2006

A microorganism capable of degrading toluene was isolated from crude oil contaminated soil and identified as Pseudomonas fluorescence. The effects of environmental factors on the degradation of toluene were investigated. The optimum temperature for toluene degradation was $30^{\circ}C$ and the maximum specific cell growth and toluene degradation rates were $0.76hr^{-1}$ and $0.36hr^{-1}$, respectively. Although the wild cells were not able to degrade toluene at $10^{\circ}C$ and $40^{\circ}C$, the cells adapted to toluene at $30^{\circ}C$ degraded 100mg/L of toluene completely at $10^{\circ}C$ and 80% of the toluene at $40^{\circ}C$. The wild cells were not able to degrade more than 200mg/L of toluene but the toluene-adapted cells degraded up to 300mg/L of toluene. Although the optimum pH was 7.0, the degradation rates were not much different in the range of 5.5 to 9.0. When nitrate was used as a nitrogen source instead of ammonium, the adaptation period became longer by 2~10 hours and the cell growth yield became lower by 45%. The toluene degradation rates after adaptation period, however, were almost same in both cases. The observations in this study will be used in the future biofilter design and operation.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.15-20
• /
• 2011

The contamination effect of toluene in the airstream on PEM fuel cell performance was studied with various toluene concentration under different operation conditions. And the recovery of the cell performance by applying clean air and the removal of toluene in the air by adsorption of active carbon were investigated. The toluene concentration range used in the experiments was from 0.1 ppm to 5.0 ppm. The performance degradation and recovery were measured by constant-current discharging and electrochemical impedance spectroscopy(EIS). Toluene adsorption capacity of KOH impregnated active carbon was obtained from the adsorption isotherm curve. The severity of the contamination increased with increasing toluene concentration, current density and air stoichiometry, but decrease with increasing relative humidity. The cell performance was recovered by toluene oxidation with oxygen and water in humidified neat air. EIS showed that the increase of charge transfer resistance due to toluene adsorption on Pt surface mainly reduced the performance of PEMFC. Toluene adsorption capacity of active carbon decreased as KOH weight increased in KOH impregnated active carbon.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.153-155
• /
• 2006

메조포러스 탄소의 톨루엔 흡착은 peak가 사전실험을 거쳐 조사된 Reference에 도달함에 의해 파과되는 것을 확인하였다. pH와 촉매의 함량을 달리하여 제조한 메조포러스 탄소를 이용한 톨루엔의 흡착실험에서 MC50-6, MCl00-6, MC100-7, MC50-7의 순으로 파과됨을 나타내었다. 톨루엔 흡착에 효율적인 합성조건은 촉매보다는 pH에 따라 달리 제조된 메조포러스 카본이 우수함을 보여주었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.139-144
• /
• 2012

A numerical simulation has been performed to investigate effects of toluene mixing on soot formation in pure ethylene opposed-flow nonpremixed flame. Mixture ratios of toluene were 3%, 5%, 10%, and 20%. Senkin code for 0-D simulation and oppdif code for 1-D simulation based on CHEMKIN III were utilized. 0-D results by senkin showed that concentrations of methyl radicals and benzene were increased with increasing toluene mixture ratio. This implied that the mixing of toluene in pure ethylene diffusion flame produces more PAHs and soot than those of pure ethylene flame. 1-D result of 10 % toluene reaction by oppdif code showed that production rate for H radical was a crucial factor for benzene formation. These results imply that methyl radical, benzene and H radical play a important role on soot formation in diffusion flames.