• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.138-144
• /
• 2000

Robot manipulators, which are nonlinear structures and have uncertain system parameters, have complex in dynamics when are operated in unknown environment. To compensate for estimate errors of the uncertain system parameters and to accomplish the desired trajectory tracking, nonlinear robust controllers are appropriate. However, when estimation errors or tracking errors are large, they require large input torques, which may not be satisfied due to torque limits of actuators. As a result, their stability can not be guaranteed. In this paper, a new robust control scheme is presented to solve stability problem and to achieve fast trajectory tracking in the presence of torque limits. By using fuzzy logic, new desired trajectories which can be reduced are generated based on the initial desired trajectory, and torques of the robust controller are regulated to not exceed torque limits. Numerical examples are shown to validate the proposed controller using an uncertain two degree-of-freedom underwater robot manipulator.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.997-998
• /
• 2011

본 논문에서는 영구자석 동기전동기의 영구자석 평균온도를 다이나모 시험을 통해 얻어진 토크 데이터로부터 간접적으로 계산하는 방법이 제시된다. 특히 영구자석의 온도에 따른 잔류자속밀도 변화에 자기 포화 효과를 고려하여 다양한 운전점에서의 온도추이를 간단하고 정확히 계산할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.158-159
• /
• 2017

본 논문에서는 매입형 영구자석 동기전동기를 위치센서 없이 기동하기 위해 회전자의 초기 위치를 추정하는 방법을 제안한다. 제안된 방법은 자기 인덕턴스의 포화현상에 따른 고정자 전류를 해석하고 최소자승법을 통해 회전자의 초기 위치를 추정한다. 전 구간에서 회전자의 초기 위치와 극성을 정확하게 알아낼 수 있어 돌극성 때문에 나타나는 릴럭턴스 토크를 효과적으로 사용할 수 있다. 또한, 전동기 정수에 영향을 받지 않으므로 다양한 전동기 구동 시스템에 적용할 수 있으며, 추가적인 하드웨어가 필요하지 않아 경제적이다. 제안하는 방법의 유효성과 우수성은 시뮬레이션을 통해 검증한다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.936-938
• /
• 2005

본 논문은 실제 단상유도전동기의 정확한 특성예측을 위해 각종 기생성분, 즉 자기회로 포화 및 고조파에 의한 영향을 분석하였다. 특히 기동특성에 큰 영향을 주는 공간고조파 성분의 영향을 고려하기 위해 슬롯과 권선분포에 대한 고조파분석 및 고조파 등가회로를 구현하였다. 이로부터 동특성해석을 시행함으로써 공간고조파에 의한 기동에서의 기생토크효과를 분석하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.5
• /
• pp.427-436
• /
• 2002

This paper presents an implementation of high-dynamic performance of position sensorless motion control system of Reluctance Synchronous Motor(RSM) drives for an industrial servo system with direct torque control(DTC). The problems of high-dynamic performance and maximum efficiency RSM drives controlled by DTC are saturation of stator linkage flux and nonlinear inductance characteristics with various load currents. The accurate estimation of the stator flux and torque are obtained using stator flux observer of which a saturated inductance $L_d$ and $L_q$ can be compensated by adapting from measurable the modulus of the stator current and rotor position. To obtain fast torque response and maximum torque/current with varying load current, the reference command flux is ensured by imposing $I_{ds} = I_{qs}$. This control strategy is proposed to achieve fast response and optimal efficiency for RSM drive. In order to prove rightness of the suggested control algorithm, the actual experiment carried out at $\pm$20 and $\pm$1500 rpm. The developed digitally high-performance motion control system shown good response characteristic of control results and high performance features using 1.0kW RSM which has 2.57 Ld/Lq salient ratio.

• Composites Research
• /
• v.14 no.2
• /
• pp.13-21
• /
• 2001

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece driveshafts composed of carbon/epoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesive joint was used to join the composite shaft and the aluminum yoke. The torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element analysis and compared with the experimental result. Torque transmission capability was based on the Tsai-Wu failure index fur composite shaft and the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and the finite element analyses, it was found that the static torque transmission capability of the composite driveshaft was highest at the critical yoke thickness, and saturated beyond the critical length. Also, it was found that the one-piece composite driveshaft had 40% weight saving effect compared with a conventional two-piece steel driveshaft.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.316-322
• /
• 2007

The EHA(Electro-hydrostatic Actuator) reveals completely different characteristics from the conventional valve-controlled Electro-hydraulic actuators. In this paper, its mathematical model including nonlinear elements was derived to be verified by experiments. Based on this, a simulation program was developed for the EHAs consisting of an electric motor driven hydraulic pump, pipe lines and a cylinder. The influence of important design parameters such as peak motor torque and rotational inertia moment of the hydraulic pump on control performance was investigated, where the test condition was intentionally selected so that the motor torque was saturated during the transient phase. As a result, design requirements for improving the control accuracy under full speed operation conditions of the EHAs were investigated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1160-1166
• /
• 2015

This paper proposes a decentralized robust adaptive control scheme for robot manipulators with input torque saturation in the presence of uncertainties. The control system should consider the practical problems that the controller gain coefficients of each joint may be nonlinear time-varying and the input torques applied at each joint are saturated. The proposed robot controller overcomes the various uncertainties and the input saturation problem. The proposed controller is comparatively simple and has no robot model parameters. The proposed controller is adjusted by the adaptation laws and the stability of the control system is guaranteed by the Lyapunov function analysis. Simulation results show the validity and robustness of the proposed control scheme.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.455-461
• /
• 1993

Glass와 실리콘 웨이퍼(p-type(100), $ ho$=6~8$\Omega$-cm)를 기판으로 하여 NiFe/glass , NiFe/Si, NiFe/Al/Si, NiFe/Ti/Si 의 박막을 제작하였다. 하지층으로 사용한 알루미늄과 티타늄은 RF 스퍼터링으로 증착하였으며 퍼럼로이(NiFe) 필름은 60, 80, 90wt%Ni로 조성을 변화시켜 증착하였다. 박막의 포화자화(Ms), 보자력(Hc), 각형비(F)는 sweep time을 1.7분으로 하여 시료 토크마그네토 메터로 측정하였다. 보자력에 영향을 주는 표면조도는 전자주사현미경(SEM)과 표면조도 측정기로써 알아보았다. 실험결과 80wt% Ni 의 퍼멀로이에서 자장 중 열처리(35 Oe,$ 350^{\circ}C$) 후 약 1의 각형비를 나타내었으며 열처리 후 보자력이 떨어짐을 보였다. 자기이방성은 알루미늄을 하지층으로 한 퍼멀로이 박막에서 가장 좋은 값(Ku=-9.60 $\times$106 emu/㎤)을 나타내었다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.71-72
• /
• 2017

본 논문에서는 비선형 최적화 기법을 이용하여 자기 포화(magnetic saturation) 및 교차 결합 현상(cross-coupling effect)을 고려한 매입형 영구자석 전동기(IPMSM)의 실시간 MTPA 제어 방법을 제안한다. 이는 토크 지령 추종과 최소 동손 운전을 만족하는 제한 최적화(constraint optimization) 문제로 접근할 수 있다. 이를 통해 유도한 연립 비선형 방정식의 경우, Levenberg-Marquardt 수치 해석법을 적용하여 안정적이면서 빠르게 해를 구할 수 있다. 이러한 방법을 이용하면 참조표(look-up table) 없이 운전 환경의 실시간 변동을 고려한 효율적인 MTPA 운전이 가능하다. 시뮬레이션을 통해 제안된 알고리즘의 전류 해가 최적 운전점과 일치함을 확인하였다.