• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.447-452
• /
• 2004

동기전동기를 처음 기동시킬 때는 유도전동기와 같이 동작하게 된다. 회전자가 고정자 자계에 거의 도달하였을 때 M 전류를 투입하게 되면, 회전자의 여자코일에 동기화 토크가 발생하게 된다. 그러나 동기화 토크의 부족은 회전자의 첫 동요 시, 회전자 각의 불안정을 야기하게 된다. 동기화 토크는 신속 정확한 동작 제어에 의해 회복될 수 있다. 더욱이 역률 100%의 안정도로 동작하기에는 어려운 부분이 있다. 그러므로 본 논문에서는 이러한 문제를 해결하기 위해 퍼지 추론 기법을 이용한 여자 전류 제어 시스템을 제안하였다. 그 주된 원리는 다양한 부하 조건하에서 부하각과 역률 100%의 동작점을 추정하고, 퍼지 추론 기법에 의해 여자 전류를 제어하는 것이다. 제안된 퍼지 제어기는 각종 특수 동작 명령어로 사용되는 마이크로프로세서형 PLC(Programmable Logic Controller)를 사용하여 구현되었으며, 전기자 전류를 감지하는 제어전압 보상기, 비교기, 그리고 쵸퍼회로로 구성된 기존의 제어기에 비해 성능이 우수하다. 이는 일련의 실험을 통해 역률 100%에서의 개선된 안정적인 동작이 가능함을 보여주었다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.408-409
• /
• 2018

본 논문에서는 BLDC와 PI 제어기를 사용하여 전동기의 속도를 제어할 때 전차원 관측기를 적용하여 부하 토크를 추정 및 보상함으로써 속도 리플을 줄일 수 있는지를 검증하고자 하였다. 모터 구동 시에는 필연적으로 부하 토크가 외란으로 포함되며 그로 인해 제어대상인 속도에 리플을 야기하게 된다. 따라서 보다 안정적인 제어를 위해서는 이 외란을 보상해주는 것이 필요한데, 관측기를 이용하면 별도의 장비나 센서 없이 이 부하 토크를 효과적으로 보상해 줄 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1064-1071
• /
• 2006

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control based on disturbance observer and sensor-less vector control. The numerical simulation and experimental results point out that the proposed readhesion control system has the desired driving wheel torque response for the tested bogie system of electric coach. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.197-199
• /
• 2009

본 논문에서는 매입형 영구자석 동기기 (Interior Permanent Magent Synchronous Motor)를 이용한 풍력발전 시스템에서의 효과적인 단위 전류 당 최대 토크 (Maximum Torque Per Amper) 제어를 위해 필요한 파라미터인 영구자석 회전자의 초기위치 및 동기 인덕턴스를 측정하는 방법을 보인다. IPMSM을 이용한 풍력 발전 시스템의 경우 기동 토크를 제대로 발생 시키고, 돌극성으로 나타나는 릴럭턴스 토크를 효과적으로 이용하기 위해서는 정확한 회전자의 초기위치 및 인덕턴스 값이 반드시 필요하다. 제안하는 고주파 입력 시험은 역기전력 성분이 발생하지 않아서 이때의 고정자 전류를 해석하여 모터의 회전 없이 현재의 회전자의 위치 및 인덕턴스 값을 측정할 수 있다. 실험 결과를 바탕으로 제안하는 방법의 타당성을 보인다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.70-79
• /
• 2005

In this paper, improvement method of control performance by a full-order observer using reduced-order state equation is proposed in the low speed range. Full-order observer using reduced-order state equation is the motor speed and the disturbance torque observer. The proposed algorithm is very stable in the low speed range about 1.9[rpm]. The disturbance torque in the motor drive system degrades speed control performance in the low speed range. The proposed algorithm estimated both motor speed and disturbance torque. The estimated disturbance torque is used as a feedforward value in output of the speed controller, As a result, it improves the response of load torque in the low speed range(1.9rpm).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.67-73
• /
• 2009

The magnetic saliency effect in surface-mounted permanent-magnet (SMPM) motors on the torque control at high speeds is first presented and analyzed in this paper. The d- and q- axes impedance are measured by proposed State-Filter. Measurement of the d- and q- axes impedance difference is performed to prove the existence of the magnetic saliency. Then, the saliency effects on the torque control performance in the flux weakening region are discussed. Based on the developed motor modeling with the reluctance torque, the proposed control adjusts the d- and q-axis current toward the operating point to track the commanded torque. The feasibility of the presented idea is verified by experimental results on a commercial 600[W] SMPM motor.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.118-123
• /
• 2002

A torque transmission system, which is composed of serveral gears and couplings, is flexible. Therefore, the torsion vibration occurs when the motor speed abruptly changes. Consequently, for accuracy characteristic response of motor, we must suppressed vibration. Therefore, vibration suppression is very important motor control. In order to suppress the vibration, various control method have been proposed. Specially, one method of vibration suppression is used disturbance observer and filter. The disturbance observer is used to suppress the vibration in this method. By feedback of the estimated torsion torque, the vibration can be suppressed. The coefficient diagram method is used to design the filter and proportional controller. But using coefficient diagram method, not adapted controller parameter in disturbance. In order to solve this problem. we used fuzzy controller for auto tuning controller parameter $K_P$. We proved of this approach is confirmed by simulation. 

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.635-642
• /
• 2004

In electric motor coaches. the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control based on disturbance observer and sensor-less vector control. The numerical simulation and experimental results point out that the proposed readhesion control system has the desired driving wheel torque response for the tested bogie system of electric coach. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.601-609
• /
• 2000

Direct torque control(DTC) of AC motor has the fast torque and flux dynamic responses even though it has very simple scheme to implement. However, DTC do not show good performance at low speed range with conventional open loop stator flux observer when stator resistance varied. Therefore, authors propose a new nonlinear stator flux observer in order to estimate the stator flux of induction motor at low speed and show its simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.1-6
• /
• 2003

The torque is an important measure that represents the performance of a particular engine. Furthermore the information of engine torque can be used as a primary feedback parameter in modem engine management system. In this paper, a methodology is proposed for torque estimation of SI-engine. Since the proposed method uses cylinder pressure sensor, the torque can be estimated in a simple manner. The indicated torque is estimated from the peak pressure and its location, and the load torque is observed by the state observer based on the estimated indicated torque. The proposed method is accurate and robust against the variations that affect the torque production such as spark timing, mass air flow and others. This torque estimation method may be an alternative solution to the use of engine torque maps in a modem torque-based engine management system.