• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.87-89
• /
• 1999

본 연구에서는 Sorfactant/Cosolvent 혼합용액을 적용한 Soil flushing 기법에 의해 농약(Endosulfan(6,7,8,9,10,10-Hexachlor-1,5,5a,6,9,9a-hexahydro-6,9-methane-2,3,4benzo (e)dioxathiepin-3-oxide))으로 오염된 토양의 정화효율을 알아보았으며, 회분식 및 연속식 실험을 통하여 최적의 운전조건을 도출하고자 하였다. 세척용액의 적정 사용조건을 알아보기 위한 회분식 실험은 Jar tester를 사용하여 진탕비 (토양 중량 : 세척용액 부피), Surfactant(SDS ＋ POE$_{5}$, POE$_{9}$ ＋ POE$_{14}$, POE$_{5}$ ＋ POE$_{14}$, POE$_{14}$)와 보조용매(water, ethanol, methanol, ethanol＋methanol)의 혼합비 및 농도 조건을 변화시켜가며 토양세척을 수행하였다. 세척용액은 보조용매에 Surfactant의 농도를 0.5%, 1%로 용해하여 적용하였다. 연속식 실험은 회분식 실험에서 얻어진 최적 세척용액 사용조건 즉, 계면활성제 SDS + POE$_{5}$(1:1, 용액농도 1%), 보조용매 ethanol을 일정 비율로 혼합한 세척용액을 오염된 토양이 충진된 유리칼럼에 여러 유량조건에서 1 - 20 pore volume까지 통과시켜 각 통과된 pore volume에서의 토양세척 효율을 알아보았다. 본 실험조건에서 얻어진 세척용액의 최적 통과 속도는 0.31 ㎤$cm^{-2}$$min^{-1}$ 이었으며, 세척온도의 증가에 따른 세척효율의 향상은 2$0^{\circ}C$이상에서 크게 둔화되었다. 또한 보조용매의 사용량을 줄이기 위해 에탄올을 물로 1:3까지 희석한 결과 세척효율에 큰 영향이 없음을 알 수 있었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.99-102
• /
• 1999

본 연구에서는 대표적인 물리 화학적 토양정화방법인 토양세척기법의 효율증진을 위하여, Fe를 다량 함유한 고농도 윤활유 오염토양을 대상으로 알카리 용액과 산성용액의 세척효율을 비교 검토하고, 과산화수소의 첨가에 따른 세척효율의 향상효과를 알아보았다. 세척용제인 NaOH와 HCl를 이용하여 세척효율 검토 결과 NaOH를 이용한 경우에 약 60% 의 세척효율을 나타냈다. 또한 NaOH 농도에 따른 정화 효율은 각각 0.5% > 1% $\geq$ 2% 순서로 증가하였다. 기존의 세척효율을 향상시키기 위하여 과산화수소를 첨가하고 오염토양의 정화효율을 비교 검토한 결과 NaOH용액에서는 과산화수소의 농도가 증가할수록 정화효율이 증가하였으나 NaOH의 농도증가에 대해서는 큰 영향을 보이지 않았으며, NaOH 3%의 농도에서 과산화수소 1%를 첨가했을 때 85%의 정화효율을 나타냈다. 또한 과산화수소 주입시기에 따른 영향을 검토한 결과 세척 후 과산화수소를 주입한 경우에 정화효율이 높았다. 반면에 HCl의 경우는 HCl의 농도가 증가할수록 정화효율이 증가하였고, 세척하지 않고 과산화수소를 주입한 경우에 정화효율이 증가하였다. 고농도의 윤활유 오염토양의 세척효율을 증진시키기 위한 처리로서 과산화수소의 주입은 NaOH 상태에서 그 효율이 약 15%정도 증진되었으며, 일정시간에 이르면 정화효율이 평형에 도달하는 것을 알 수 있었다. HCl 상태에서는 25%의 정화효율이 증진되는 것을 알 수 있었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.227-230
• /
• 2004

본 연구에서는 유류오염토양 세척유출수내 미세토사의 효율적 제거를 위한 최적의 방안 및 적용 운전 조건을 도출하고자 하였다. 응집제를 주입하지 않은 blank 실험결과, 광운대학교 토양 세척유출수는 pH 7～12의 범위에서 65～75%의 효율을 나타내었고, 우이천 하천퇴적 토양 세척유출수는 pH 7～11의 범위에서 30% 안팎의, pH 12에서는 70% 정도의 낮은 효율을 나타내었다. pH 13에서는 두 가지 세척유출수에서 각각 91%, 85%의 효율을 나타내었다. 응집ㆍ침전 실험 결과, 광운대학교 토양 세척유출수는 FeC13, alum, PAC을 적용하였을 때 대체로 99% 이상의 효율을 보였으나, PAM을 적용하였을 때는 pH 13에서만 약 95%의 효율을 보였을 뿐 pH 7～12의 범위에서는 50～70%의 낮은 효율을 보였다. 우이천 하천퇴적 토양 세척유출수는 alum과 PAC을 적용하였을 때 대체로 90% 이상의 효율을 나타내었으나, FeC13와 PAM을 적용하였을 때는 pH 13일 경우에서만 98%이상의 효율을 보였을 뿐 다른 pH조건에서는 대체로 60%이하의 효율을 보였다. 두 가지 세척유출수에 대하여 높은 효율을 보인 alum과 PAC의 경제성을 비교해본 결과 같은 양의 세척유출수를 응집처리 할 경우 PAC에 비하여 alum을 적용하였을 때 적은 비용이 소요되었다. 따라서 alum이 효율성과 경제성에서 가장 우수함을 알 수 있었다.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.8-19
• /
• 2008

The physicochemical properties of soils having high uranium content, located around Duckpyungri in Korea, were investigated and the lab scale soil washing experiments to remove uranium from the soil were preformed with several washing solutions and on various washing conditions. SPLP (Synthetic Precipitation Leaching Procedure), TCLP (Toxicity Characteristic Leaching Procedure), and SEP (Sequential Extraction Procedure) for the soil were conducted and the uranium concentration of the extracted solution in SPLP was higher than Drinking Water Limit of USEPA (30 ${\mu}g$/L), suggesting that the continuous dissolution of uranium from soil by the weak acid rain may generate the environmental pollution around the research area. For the soil washing experiments, the uranium removal efficiency of pH 1 solution for S2 soil was about 80 %, but dramatically decreased as pH of solution was > 2, suggesting that strong acidic solutions are available to remove uranium from the soil. For solutions with 0.1M of HCl and 0.05 M of ${H_2}{SO_4}$, their removal efficiencies at 1 : 1 of soil vs. washing solution ratio were higher than 70%, but the removal efficiencies of acetic acid, and EDTA were below 30%. At 1 : 3 of soil vs. solution, the uranium removal efficiencies of 0.1M HCl, 0.05 M ${H_2}{SO_4}$, and 0.5M citric acid solution increased to 88%, 100%, and 61% respectively. On appropriate washing conditions for S2 soil such as 1 : 3 ratio for the soil vs. solution ratio, 30 minute for washing time, and 2 times continuous washing, TOC (Total Organic Contents) and CEC (Cation Exchange Capacity) for S2 soil were measured before/after soil washing and their XRD (X-Ray Diffraction) and XRF (X-Ray Fluorescence) results were also compared to investigate the change of soil properties after soil washing. TOC and CEC decreased by 55% and 66%, compared to those initial values of S2 soil, suggesting that the soil reclaimant may need to improve the washed soils for the cultivated plants. Results of XRF and XRD showed that the structural change of soil after soil washing was insignificant and the washed soil will be partially used for the further purpose.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.61-67
• /
• 2009

A non-discharged system of sequentially physico-chemical water treatment was used to treat the contaminated water produced from washing system of soils according to full-scale soil washing. After washing the TPH contaminated soils, the remaining concentrations of COD$_{Mn}$, SS, and n-hexane were analyzed for each compartment to estimate the treatment efficiencies of non-discharged system. Three times of sampling events were conducted for 4 different compartments (sediment tank, flocculation tank, oil/water separator, and process-water tank). In addition, soil washing efficiencies and concentrations of each parameter (COD$_{Mn}$, SS, and n-hexane) for process-water tank were analyzed for about 8 months. As results, the average efficiency of soil washing was high to have 95.9%, regardless of the condition of TPH contamination level for soils, as well as the concentrations of COD$_{Mn}$, SS, and n-hexane in the process-water tank were below the regulation limits of the Water Environmental Conserveation Act. Accordingly, the full-scale washing treatment system in this study could make the washing water 100% recycled which lead the system to be environmentally-friendly and economical.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.87-101
• /
• 1999

This study has been carried out to examine the feasibility of washing technique for reducing the heavy metal contamination level of tailing wastes and agricultural soil surrounding abandoned metal mines. Some organic acids with low molecular weight were used as washing solution. Initial contamination levels of copper and lead for some soil samples were found to exceed the standard levels of countermeasure and concern, and those of cadmium to approach the standard level of countermeasure. Experimental results using sequential extraction method revealed that more than half of copper and lead existing in tailing wastes are adsorbed forms available for plants. There are some proportional relationships between metal concentrations determined by using 0.1N HCI solution and those determined by sequential extractions. Citric acid was turned out to be superior to oxalic acid and acetic acid with low molecular weight in washing above three metals. When citric acid is used for washing heavy metals from soil, it is desirable to operate at pH less than 5.5 for better washing effect. Metal removal effect by citric acid solution has been proved to depend upon solution concentration and the mass ratio of solution to soil. Addition of SDS(Sodium Dodecyl Sulfate) to citric acid improved the washing effect of cadmium among three metal most significantly. while copper removal did not change. Washing technique using citric acid for removal of heavy metals from agricultural soil or tailing wastes is recognized to be an effective remediation method.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.350-353
• /
• 2003

본 연구에서는 비소로 오염된 토양 정화를 위한 수산화나트륨의 적용성에 관한 실험을 수행하였다. 수산화나트륨과 함께, 중금속 제거에 효율적이라고 알려진 염산과 citric acid를 50mM과 100mM로 적용하여 비교 세척실험을 실시하였다. 선정한 비소로 오염된 토양 중 광미와 밭 토양에 대해서는 수산화나트륨에 의한 세척이 보다 효율적이었으며, 하천퇴적 토양의 경우에는 수산화나트륨이 citric acid와 비슷한 효율을 보였다. 수산화나트륨을 이용한 시간에 따른 용출실험 결과, 3가지 토양 모두 적용농도 범위 내에서는 6시간 이후부터 90%이상의 비소 용출효율을 보였다. 수산화나트륨의 최적 농도 선정을 위해 각기 다른 농도 (50, 200, 300, 500, 750, 1000 mM)를 이용하여 각각의 토양을 세척한 결과, 3가지 토양 모두 200mM이 최적 농도임을 알 수 있었다.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2008

In this study, the feasibility of soil washing, chemical oxidation and sonication was investigated to treat lubricantcontaminated railroad soil. Tergitol, a non-ionic surfactant, was used as a washing agent with or without iso-propyl acohol as a cosolvent. However, it was not effective to remove lubricant from soil even though tergitol was the most effective washing agent for diesel-contaminated soil. The cosolvent reduced the overall washing efficiency. Chemical oxidation removed 30% of lubricant from contaminated soil. Soil washing after chemical oxidation extracted additionally 16-17% of lubricant. Sonication enhanced-soil washing showed enhanced overall efficiency of soil washing. Lubricant-contaminated soil should be remediated by the other technology used for diesel-contaminated soil.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.41-47
• /
• 2018

Radioactive substances, especially $^{137}Cs$ discharged in the course of Nuclear Power Plant Accident or maintenance of power plants, cause contamination of the soil. For habitation of residents and reuse of industrial land, it is inevitably necessary to decontaminate the soil. This study examines a soil washing process that has actually been used for washing of radioactive-contaminated soil. The soil washing process uses a washing agent to weaken surface tension of the soil and cesium, separating cesium from the soil. In this study, in order to raise the efficiency of the process, a flocculating agent was added to the washing water to remove fine soil and cesium. The cesium concentrations before and after applying the flocculating agent to cesium solution were measured through ICP-OES. When using 0.1 g of J-AF flocculating agent in the experiment, the maximum Cs removal performance was approximately 88%; the minimum value was 67%. Species combinations between cesium and soil were predicted using Visual MINTEQ Code; the ability to reuse the washing water or not, and the removal rate of the fine soil, determined via measurement of the turbidity after applying the flocculating agent, were determined.