• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.145-151
• /
• 1994

앞 턱 부위가 짧고 후방으로 위치해 있을 때 턱의 높이를 증가시키고 전방으로 돌출시키는 축조 이부성형술의 방법으로는, 매식체 삽입술, 골 절단술, 골 절제술 또는 이들을 동시에 시행하는 혼합술등이 행해져 왔다. 그러나 매식체 삽입술에서는 감염 또는 매식체의 유동성 등의 합병증의 발병이 빈발하고 매식체의 밑 부위에 골이 흡수된다든지 연조직의 변화를 예측하기 어렵다든지 하는 복잡한 문제점들이 종종 보고되고 있다. 따라서 매식체를 이용하지 않는 골 절단술이나 골 절제술만을 이용한 다양한 방법의 이부성형술이 많이 시행되고 있다. 하악골이 전후방 관계로 발육부전인 환자에게 양측 하악지 시상분할술을 시행하여 전방 이동시킨 후 앞 턱의 위치를 좀더 개선하기 위하여 $Michel{\'{e}}t$ 테크닉의 변형법을 이용한 이부성형술을 추가로 시행하였다. 이 방법의 이부성형술은 턱의 수직적, 수평적 길이를 증가시키기 위하여 하악결합면 부위에 장부와 장붓구멍 모양을 한 골 절단술을 시행하고 광범위한 연조직경을 보존하여 골편으로의 혈류 차단을 최소화하였으며 나사를 이용한 견고한 고정을 용이하게 하였다. 이 술식은 턱을 수직적으로 증가시킬 때 두 골편 사이의 공간에 골 이식을 시행할 필요가 없으며, 금속판을 이용하지 않아도 정확한 위치에 골편을 고정하기가 용이하고, 또한 고정용 나사가 향후 골형성 부위에 위치하게 된다는 장점을 경험하게 되어 이에 한 증례를 보고하는 바이다.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.37-43
• /
• 2019

This paper presents an optimization method to determine the shoulder height of an angular contact ball bearing by 3D contact analysis using nondimensional-shaped variables. The load analysis of the ball bearing is performed to calculate the internal load distributions and contact angles of each rolling element. From the results of bearing load analysis and the contact geometry between the ball and inner/outer raceway, 3D contact analyses using influence function are conducted. The nondimensional shoulder height and nondimensional load are defined to give the generalized results. The relationship between the shoulder height and radius of curvature of the shoulder under various loading conditions is investigated in order to propose a design method for the two design parameters. Using nondimensional parameters, the critical shoulder heights are optimized with loads, contact angles, and conformity ratios. We also develop contour maps of the critical shoulder height as functions of internal loads and contact angles for the different contact angles using nondimensional parameters. The results show that the dimensionless shoulder height increased as the contact angle and dimensionless load increased. Conversely, when the conformity ratio increased, the critical shoulder height decreased. Therefore, if the contact angle is reduced and the conformity ratio is increased within the allowable range, it will be an efficient design to reduce the shoulder height of ball bearings.

• Journal of Biomedical Engineering Research
• /
• v.21 no.6
• /
• pp.599-606
• /
• 2000

고정체 나사산 형상이 식립된 고정체를 둘러싸고 있는 턱 뼈에서 발생된 응력분포에 미치는 영향과 효과적인 나사산 형상을 결정하기 위해서 다양한 치아 고정체 형상에 대해서 응력해석을 수행하였다. 나사산 골 한쪽 부위에 라운딩이 된 형상의 고정체에서 발생된 응력분포는 다른 나사산 형상의 고정체에서 발생된 응력분포보다 더 효과적으로 나타났다. 이 해석 결과를 근거로 최적의 고정체 치수를 결정하기 위해서 나사산 끝단의 폭, 나사산 높이, 그리고 가해지는 하중의 방향 등과 같은 설계 변수의 변화에 따른 응력해석이 수행되었다. 최대 응력 집중은 고정체 나사산의 첫단 부위에서 발생하였으며, 100 N의 15도 경사하중이 가해졌을 때 발생된 최대 등가응력은 동일 크기의 수식하중보다 2배 정도 더 높게 나타났다. 그리고 나사산 끝단의 폭과 나사산 높이 사이의 연관성에 관련된 해석결과에서 나사산 끝단의 폭과 나사산 높이 사이의 연관성 효과는 무시할 만큼 작다는 것을 알았다. 고정체의 나사산 피치에 대한 나사산 끝단의 폭의 비와 나사산 높이의 비가 각각 0.5와 0.46일 때 다른 고정체의 치수들보다 더 효과적인 응력분포가 나타났다

• Journal of Korean Home Economics Education Association
• /
• v.21 no.3
• /
• pp.1-28
• /
• 2009

The purpose of this research was to provide the information needed for improving the elderly housing education and the elderly housing contents of Technology and Home Economics textbook. Thus, the elderly housing contents of current Technology and Home Economics textbook were categorized. Then, a total of 233 teachers were surveyed to examine their importance perception on the elderly housing contents. Elderly housing contents were grouped into S categories, each of which was named 'safety and safety management', 'room plan for the elderly', 'shrinking stage in family life cycle and dependency stage in housing life cycle','a house for 3-generation extended family', and 'universal design'. Teachers' importance perception was generally high for 'safety and safety management' and especially for 'safety and safety management' of bathroom(protection against slippery floor, safety bar, the appropriate position and height of shower, bathtub, and wash stand) ; the basic guidelines of 'room plan for the elderly'(emergency call, closely located bathroom, flat and non-slippery floor) ; the general guidelines during shrinking stage in family life cycle and dependency stage in housing life cycle'(protection equipments against safety accident, emergency call, flat and non-slippery floor) ; independent life among 3-generation extended family members(bathroom for the elderly, space plan for independent life among extended family members) ; the basic design guidelines of universal design(safety bar in bathroom, flat floor) and the guidelines of universal design which were especially helpful for wheelchair users(enough empty space in front of door and in corridor, wide door and corridor). Recommendations for the elderly housing education and the elderly housing contents of Technology and Home Economics textbook were that 'emergency call','safety bar in bathroom' and 'flat and non-slippery floor' were the most basic guidelines for elderly housing; that 'enough empty space in front of door and in corridor', 'wide door and corridor', 'low and wide steps', 'ramp for wheelchair users' and 'D-type or lever-type door handle' were most recommendable guidelines for universal design; that 'need for elderly housing', 'types of elderly housing', 'alternatives and choices of dependency stage in housing life cycle' and 'house plans for shrinking stage in family life cycle' were required guidelines for increasing elderly-only family.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1605-1610
• /
• 2006

계단식 Gabion 낙차공은 다공체 구조물로서 시공하기 쉽고 안정적이며, 하천유수에 대하여 저항성이 있어 하천구조물로서 널리 자주 사용되고 있다. Gabion은 다공체로서 유수력을 쉽게 흡수함으로써 감세지 계단표면의 위치에너지를 소산시키는데 매우 효과적이다. Stephenson은 1/10 축적을 가진(투수성이 있고 하천낙차공에만 적용되는 투수성 상류면을 가진 높이 4m까지의) 계단식 Gabion을 월류 실험한 바가 있으며, 그 연구결과가 실무에서 인용되고 있다. 그러나 본 연구에서는 급변류의 에너지 소산효과를 조사하기 위하여 중력이 다른 힘들보다 지배적이므로 Froude 상사법칙을 이용하고 1/1, 1/2, 1/3 경사를 가진 계단을 적용하였다. 실험에서는 경사를 가진 높이 4m 계단식 위어와 게비온 감세지 실험, 계단모형실험(보통구조, 층상구조, 끝단이 올라간 구조, 턱을 가진 구조), 격리수맥흐름, 부분수맥흐름으로 제안하여 경사에 따른 급변류의 에너지 소산효과에 대한 결과를 얻을 수 있었다.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.20-28
• /
• 1992

The influence of starvation on morphological change and survival rate of the left eye flounder larvae was examined at the KORDI laboratories in March, 1990. 1. The larvae of left eye flounder began of feed on rotifers in 5 days after hatching. In case of non-feeding, all of the larvae died in 11 days after hatching. The larvae which fed 1 day after the normal first feeding schedule grew normally but 100 of the larvae died in 14 days when the feeding was delayed for 2 days after hatching. 2. With the exhaustion of the yolk, the total length, body length, myotome height and gut height of unfed larvae decreased. Gut height is the most decreased demensions while starving. 3. The ratio of gut height to myotome height in unfed larvae has declined most rapidly compare to other demensions during the starvation. At 13 days after hatching, the ratios of these between fed and unfed larvae were 0.797 and 0.467, respectively. 4. The morphology of starving larvae were characterized as sharpened jaw, projected edge of lawer part of clavicle and slender gut.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.199-202
• /
• 1991

Chin is located on most prominent portion of the face, so make more important esthetic value in impression. So historicaly, many authors had made efforts on correction of deformed chin, termed genioplasty. But those technique have been performed on limited cases, which have normal shape or width of chin. In the cases with more narrow or short chin, location of mental foramen or root of incisors restrict the use of such technique. But modified genioplasty technique we used can be performed without any restriction and change of frontal profile of chin. So we report a case that was performed with modified horizontal step osteotomy for advancement genioplasty, which had been reported by Hinds and Kent, with some complications.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.8-13
• /
• 1998

본 논문은 Gesturewndcjq 이론에 근거한 폐쇄음의 조음장소와 폐쇄음의 폐쇄구간 길이와의 상관관계에 대한 가설 즉, 연구개음의 폐쇄구간이 양순음이나 치음의 폐쇄구간에 비해 짧을 것이라는 가설을 실험음성학적으로 검증하였다. 본 연구의 결과는 이 가설을 완 전히 뒷받침해주지는 않는 것으로 나타났다. 폐쇄음의 조음방법에 따라 약간의 차이를 보이 긴 하나 세 조음방법 상에서 적어도 양순음과 연구개음의 폐쇄구간 길이에 있어서는 본 연 구가 예측한대로 양순음의 폐쇄구간 길이가 연구개음의 폐쇄구간 길이보다 긴 것으로 나타 났다. 그러나 치음의 경우는 연구개음의 폐쇄구간과 통계적으로 유의한 차이를 보이지 않았 다. 본 논문은 Gesture 이론이 폐쇄음 조음에 있어 폐쇄음 gesture와 주위 모음의 gesture와 의 중첩정도 외에 여러 다른 음성학적 사실들을 동시에 고려할 필요가 있음을 보여주었다. 즉, 폐쇄음 조음시 폐쇄강의 크기, 조음기관의 움직임 속도, 폐쇄강 내 압력 형성에 걸리는 시간, 그리고 폐쇄음 조음시 턱의 높이 등에 대한 고려의 필요성을 제시하였다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.64-71
• /
• 2024

Purpose: The purpose of this study is to evaluate Ti-base abutment's three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer's instructions. All 90 specimens were placed and tested in a universal testing machine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performed using Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights. After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3 cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height. However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion: Although Ti-base abutment height did not influenced zirconia restorations' retentiveness, cement types showed significant differences.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.138-148
• /
• 1990

The influence of starvation on morphological change of the red sea bream larvae was examined at Song-ji fish hatchery, Tongyong-Gun, Kyongnam Provice in July 1988. The results obtained are as follows: 1) The larvae of red sea bream began to feed on rotifers in 2 days after hatching. In case of non-feeding, all of the larvae died in 5 days after hatching and the larvae which feeding delayed 1 and 2 days from normal first feeding schedule also died 100 in 6 days after hatching. 2) With the exhaustion of the yolk, the total length, body length, myotome height and gut height of unfed larvae decreased. 3) The ratio of height to myotome height in unfed larvae has declined most rapidly compare to other demensions while starving. At 5 days after hatching, the ratios of these of starving larvae and fed larvae were 0.306 and 0.010, respectively. 4) The morphology of starving larvae at 6 days after hatching are characterized as sharpened jaw, projected edge of lower part of clavicle and slender gut.