• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.46-48
• /
• 2007

위성체의 전력계 서브시스템은 임무기간 중 탑재체 및 위성체 버스의 각 서브시스템으로 전력을 제어하고 분배한다. 과학기술위성 2호의 전력계 서브시스템은 태양에너지를 전기에너지로 변환하는 태양전지판, 에너지 저장을 위하여 재충전이 가능한 배터리, 그리고 태양전지판으로부터 배터리를 통해 다른 장치에 전력을 전달하는 전력조절 및 제어시스템으로 구성된다. 본 논문은 과학기술위성 2호의 전력계 서브시스템의 구성과 상세설계사양에 관하여 설명한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.845-848
• /
• 2010

After analyzing various information gathered in Wireless Sensor Networks, it is sent to the node far from it. If it fails to keep its minimum power considering power consumption, the node and the network wouldn't work. There are many research that each node gets the power from solar cells and keep the life to maximize networks'life thus solar cells should be modeled considering power consumption. This thesis propose the fit model of solar cells considering charge and discharge in Wireless Sensor Networks.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.453-454
• /
• 2014

태양광 발전용 AC-모듈에서 발생하는 전력 디커플링을 위해 사용되는 대용량 전해 커패시터는 시스템의 신뢰성을 감소시키므로 최근 보조회로를 이용한 디커플링 기법이 연구되고 있다. 하지만 디커플링 회로의 제어기 오차와 시스템의 효율이 고려될 경우, 태양광 패널에 전력 맥동이 존재하게 되고 이는 인버터 출력 전류를 왜곡시키는 원인이 된다. 본 논문에서는 제어기 오차와 시스템 효율을 고려하여 발생하는 전력 맥동에 대해 분석하고, 이를 저감시키기 위한 전류 왜곡 보상 기법을 제안하였다. 이를 PSIM 시뮬레이션을 통해 그 타당성을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.437-442
• /
• 2001

Recently, transformerless inverters have been studied to reduce sizes and costs of utility-connected PV systems. This paper presents a transformerless PV inverter using a two-phase boost converter of reduced ripples in input current and output voltage, low voltage stress of semiconductor device and reduced size of input reactor. And new PWM method is introduced, whose on-off time is calculated from simultaneous equation induced by fourier series. To verify a validity of the proposed transformerless inverter, computer simulation has been carried out.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.261-267
• /
• 2009

Due to the measurement noise or system noise, the performance of photovoltaic power generation system can be degraded. If this noise is contained in the solar array voltage measurement signal, the correct operation of the maximum power point tracker can not be guaranteed. The application of the extended Kalman filter to the photovoltaic system can obtain enhanced states estimation result. The Kalman filter provides a recursive solution to optimally estimate from random noise signals. Additionally, as a consequence of Kalman filter, the unmeasurable state such as inductor current can be estimated without current sensor. The methods for system modeling and extended Kalman filter design are presented and the experimental results verify the validity of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.230-231
• /
• 2007

계통연계형 태양광 시스템을 구성하고 있는 전력변환장치인 PCS(power conditioning system)는 일반적으로 그 내부에 입력전력 평활용 Capacitor, DC-DC Converter, DC link Capacitor, DC-AC Inverter 및 L-C Filter 등으로 구성된다. 이러한 태양광 시스템의 구성은 주로 태양광 어레이와 PCS의 DC-DC Converter 및 DC-AC Inverter의 수와 연결 방법에 따라 여러 가지로 구성할 수가 있다. 본 논문에서 제안할 시스템의 구성은 하나의 태양광 어레이를 다수의 계통 연계형 태양광 PCS가 공유하는 형태인데, 이러한 시스템의 주요 장점은 첫째, 일사량에 따라 각각의 PCS가 모두 정격에서 운전하도록 하여 변환효율을 개선할 수 있다는 점과 둘째, 태양광 어레이의 용량 확장에 따른 PCS 장치의 용이한 확장성 그리고 셋째, 연결되어 있는 다수의 PCS 중 하나의 태양광 PCS가 고장으로 인하여 유지 및 보수가 필요할 때에도 그 외의 다른 정상적인 태양광 PCS는 지속적인 발전이 가능한 장점 등을 갖는다. 본 논문에서는 태양광 어레이의 출력을 공유하는 병렬운전용 태양광 PCS의 구성에 대하여 연구하고, 그 병렬운전기법을 제시하여 이에 대한 타당성을 시뮬레이션으로 검증하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.21-23
• /
• 2018

본 논문에서 계통연계형 태양광인버터에 적용되는 P&O와 InC의 2가지 MPPT 알고리즘을 주기에 따른 발전 특성을 비교하였다. MPPT는 태양전지 모듈 스트링의 전압과 전류를 검출하여 DC 링크로 전력을 전달하며, 이후 전력변환회로에 의해 계통연계가 이루어지기 때문에 계통연계 제어와 MPPT 제어는 서로 영향이 있다. MPPT 주기에 따른 발전 특성을 Psim 시뮬레이션을 통해 분석하였다.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.95-100
• /
• 2006

The COMS(Communication, Ocean and Meteorological Satellite) EPS(Electrical Power Subsystem) is derived from an enhanced Eurostar 3000 version. Eurostar 3000 EpS is fully autonomous operation in nominal conditions or in the event of a failure and provides a high level of reconfigure capability. This paper introduces the COMS EPS preliminary design result. COMS EPS consists of a battery, a solar arrat wing, a PSR(Power Supply Regulator), a PRU(Pyrotechnic Unit), a SDAM(Solar Array Drive Mechanism) and relay and fuse brackets. COMS EPS can offer a bus power capability of 3 kW. The solar array is made of a deployable wing with two panels. One type fo solar cells is selected ad GaAs/Ge triple junction cells. Li-ion battery is base lined with ten series cell module of five cells in parallel. PSR associated to battery and solar array wing generates a power bus fully regulated at 50 V. Power bus os centralized protection and distribution by relay and fuse brackets. PRU provides power for firing actuarors devices. The solar array wing is rotated by the SADM under control of the attitude orbit control subsystem. The control and monitoring of the EPS, especially of the battery, is performed by the PSR in combination with the on-board software.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.42-54
• /
• 2019

The solar and wind power is spreading as a means to $CO_2$ reduction, but it has the characteristics of the volatility depending on the weather changes. This article aims to estimate the additional integration costs in Korea electric system in response to such volatility of increasing solar and wind power generation, using Korea electric power trading analyzer(KEPTA). The analysis utilizes the statistics of "8th Basic Plan for Long-term Electricity Supply and Demand" and "Renewable Energy Plan 3020". As the results, integration costs will be estimated 13.94Won/kWh~32.55Won/kWh, consisting of 8.94Won/kWh as back-up costs, 1.03Won/kWh~4.45Won/kWh as balancing costs, and 3.97Won/kWh~19.16Won/kWh as grid-costs. These results suggest that when the integration costs are secured, Korea electric system will be expected in the stable situation. This article leaves the further studies with taking the technological development of solar and wind power generation, the introduction of energy storage system, and wholesale price of electricity into consideration.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1039-1048
• /
• 2013

Generally, the buck converter controller was designed to control output voltage of the converter. However, design of the controller in photovoltaic power conditioning system is different from general design. the controller in photovoltaic power conditioning system controls input voltage of the converter(output voltage of the solar cell) for MPPT(Maximum Power Point Tracking). This paper proposes novel buck converter model which can control input voltage of the converter. We integrate this model with a model of solar cell. and linearize at the operating point(MPP). In addition, we determine whether or not suitable for the general linear controller design into small and large signal analysis.